CERTAIN PROVISION WORKS AT RESTRICTED AREA NEW DELHI UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete in ground floor & paving not exc 15 cm thick below or above ground floor including removal from site complete all as specified and as directed.

Taking down cement plaster on concrete or brick surface of any description including finishes etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for applying 15mm thick plastering in cement mortar (1:4) on brick or concrete wall surface, mixed with the water proofing compound (if required) finished fair & even without using extra cement complete all as specified and as directed. Note: Water proofing Compound shall be measured and paid for separately as "Supply Only".

Supply only liquid water proofing compound complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar (1:6), on brick or concrete wall surface, finished fair & even complete all as specified and as directed.

M&L for 75 mm thick cement concrete, 1:2:4 type B2, using 40mm graded stone aggregates, as in sub base, as in sub base, finished rough to receive top layer etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

S&F 10mm thick Vitrified Ceramic tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors & skirting, over & including 10mm thick adhesive of approved make and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and as directed.

S&F vitreous china wash hand basin, white, flat back, of size 550mmx400 mm, with pedestal including cutting for and pinning in end of brackets, 15mm angular stop cock, 32 mm waste fittings, PVC connection pipe of required size, brass chromium plated waste coupling for wash hand basin including flush pipe of polyethylene (low or high density) or PVC 32 mm dia pipe complete all as specified and as directed.

All as per item No 12.00 here in before but as in repair complete all as specified and as directed.

S&F Pillar taps for 15mm bore pipe, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore pipe and fixed complete all as specified and as directed.

S&F chromium plated tubular towel rail 20mm dia 60cm long between flanges complete all as specified and as directed.

S&F wash down water closet (Squatt pattern) using vitreous China squatting pan, Orissa pattern', Size 580X440mm, white, with integral foot rests, including PVC valve less, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern, PVC connection 375mm long etc complete all as specified and as directed.

All as per item No 17.00 here in before but as in repair complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, including removal from site complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections, including removal from site complete all as specified and as directed.

Supplying and laying & testing CPVC pipes 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete with CPVC fittings and brass threaded fittings like socket, elbow as required including all necessary cutting and fixing of plumbing fittings with CP extension pieces, if required, for concealed work and clamping complete all as specified and as directed.

All as per item No 21.00 here in before but 25 mm outer dia pipe complete all as specified and as directed.

M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cement mortar 1:3, width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed.

S&F CP brass extension nipples of size 25mm to 50mm, suitable for 15 mm bore pipe complete all as specified and as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and as directed.

M&L 3mm thick wall care putty to old or new plastered wall surface, trawelled to an even and smooth surface complete all as specified and as directed.

M&L 3mm thick wall care putty to old or new plastered ceiling surface, trawelled to an even and smooth surface complete all as specified and as directed.

M&L for heavy duty coloured (approved colour) fully vitrified paving tiles of size 300mmx300mmx10-12mm thick, set and jointed in neat cement slurry and pointed in coloured or white cement to match the shade of tiles over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed. Make: Somany (Durastone) / Marbito (M stone)/ Riwasa (Parkland series) /Johnson(Endura)/ Nitco(Kratos)

S&F in repair vertical venation blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminium top rail and PVC bottom, weight attached with 100 mm strip, with chain complete all as specified and as directed. (Make : Vista / Marvel/Hunter Douglas/Mac)

Surface excavation not exc 30 cm deep & averaging 15 cm deep & getting out in soft/ loose soil complete all as specified & as directed.

Excavation in trenches not exc. 1.5 metre wide & not exc. 1.5 metre in depth for foundations etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out as in soft/loose soil complete all as specified & as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in soil complete all as specified & as directed.

Removing excavated surplus materials (soil) out side MD land complete all as specified & as directed.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified & as directed.

Filling under the floors using approved excavated soil including watering, ramming spreading in layers not exc 25 cm thick complete all as specified and as directed. (Note: Earth obtained from excavation shall be re-used under this item)

M & L hard core of broken stone or boulder of gauge not exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick watered & rammed to a true surfaces complete all as specified and as directed.

M&L 75 mm PCC 1:3:6, type C-1, using 20mm graded stone aggregate, as in plinth protection/hard standing and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L 7 to 8 mm thick, Non-skid coloured Ceramic tiles, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, laid over & including 15mm thick screed bed or bedding layer of cement mortar 1:6 as in flooring complete all as specified and as directed.

S & F 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F Chromium plated shower rose with swivel joints, 65mm size, including fixing to 15mm bore steel pipe or union complete all as specified and as directed.

S&F 15 mm bore chromium plated fancy type stop cock with long shank and cup (concealed type) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frame/windows or stone, concrete or brick surrounds, fixed with oil putty or with beads complete all as specified & as directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified & as directed.

S & F PVC (SWR) floor traps 75mm dia of out let with CP grating including jointing to pipe with solved cement or adhesive complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solved cement or adhesive laid in trenches or in floor complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solved cement or adhesive laid in trenches or in floor complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvent cement or adhesive fixed to walls with mild steel clamps complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvent cement or adhesive fixed to walls with mild steel clamps complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends any radius with oval access door including fixed to pipe with solved cement or adhesive complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends any radius with oval access door including fixed to pipe with solvent cement or adhesive complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solvent cement or adhesive complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solvent cement or adhesive complete all as specified and as directed.

S&F 110mm PVC (SWR) WC connector with lip ring including fixed to pipe with solvent cement or adhesive complete all as specified and as directed.

S&F Rolled structural steel sections as in framing, purline, rafter, holdfast and the like, fixed with cleats and connecting plates, etc. and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F MS rolled hollow section in framed work as in doors or gates of angle or other section with gusset plates using FE-290 (Gde-E-165), rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long, dia of neck exc 12 mm but not exc 20mm complete all as specified and as directed.

S&F in position Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutter, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Reinforced concrete pipes 200mm internal dia, class NP2, laid and jointed complete with collars complete all as specified and as directed.

M&L PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, as in concrete bed to drain pipes of 200 mm internal dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of alkali resistant primer, on plastered and other surfaces complete all as specified and as directed.

M&L for preparation of old wall surfaces and applying two coats of Oil Bound Distemper on old plastered and other surfaces complete all as specified and as directed.

M&L for preparation of old ceiling surfaces and applying two coats of Oil Bound Distemper on old plastered and other surfaces complete all as specified and as directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 litre/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) for external walls complete all as specified and as directed. Make: Apex Ultima of Asian paints or equivalent of Make mentioned in PS.

M&L for two coats of synthetic enamel paint over and including a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preparation of surfaces complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on old steel surface including preparation of surfaces complete all as specified and as directed.

Taking down chowkhat with shutter without taking off shutters of any description area exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.

S&F powder coated (of approved colour) aluminium anodised section 63.50x38.10x1.6 mm thick gauge for aluminium partition wall and panel size not exc 1.00mx1.00m including 5mm thick plain/frosted tinted glass on top half portion and 12mm thick pre-laminated sheet fixed in half bottom portion complete & including all accessories of glazing clips and rubber gasket/lining etc complete all as specified and as directed.

S&F powder coated (of approved colour), aluminium frame, with partially glazed shutters, single/ double leaf, divided into two glazed panels, including aluminium anodised snap beading and rubber gasket/lining for fixing of glass complete all as specified and as directed. The frame and shutter shall be made out of the following sections:- (a) Aluminium powder coated door frame 101.60mmx44.45mmx1.60mm fixed with aluminium trust bolt in walls by drilling as directed. (b) Aluminium powder coated side rail of shutter section 85mmx44.5mm x1.6mm (c) Aluminium powder coated top rail of shutter section 114.30mmx24.4mm x1.6mm (d) Aluminium powder coated middle rail of shutter section 83.5mmx44.5mm x1.6mm (e) Aluminium powder coated bottom rail of shutter section 150mmx25.4x 1.60mm (f) Aluminium powder coated tower bolt 200 mm long - 02 Nos in each leaf (g) Aluminium powder coated handle 250 mm long -02. No’s in each leaf. (h) Glass Panel shall be 5.5 mm thick tinted glass. (j) 12mm thick prelaminated particle board laminated both side exterior grade (k) Brass 6 lever Mortice lock with duplicate keys.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in copings and the like including weathering, slightly rounded or chamfered angles and throating with and including necessary use and waste of form work for fair faces of concrete complete all as specified and directed.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers and similar articles exc 5 Kg each complete all as specified and as directed.

M&L RCC 1:1 ½ :3 type B-1 using 20 mm graded stone aggregate (nominal mix) as in slab supported on walls, beams and columns in floors, roof, landings, balconies, canopies, deck slab and in shelves & the like etc complete all as specified & as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surface complete all as specified and as directed.

Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 10cm but not exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work rough finished surface complete all as specified and as directed.

M& L High Yield Strength, Deformed, Mild steel TMT bars, Fe-500 grade, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius in one brick thick honey comb walling built in cement mortar 1:4 compete all as specified and as directed.

M&L for loose filling with aggregate of broken bricks of gauge 40 to 80mm in soakage pits, soakage wells etc complete all as specified and as directed.

Excavating over areas not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

All as per item No 83.00 here in before but depth exc 1.5m & not exc 3m complete all as specified and as directed.

Excavation in trenches not exc. 1.5 metre wide, depth exc 1.5 metre and not exc 3.00 metre, for foundations etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 Sqm on plan and getting out as in soft/loose soil complete all as specified & as directed.

M&L 20 mm thick, machine cut, granite stone slab of approved shade (Zed Black) (superior Quality) (table rubbed and polished as in floors, jambs, steps, cooking platform, shelves etc and the like, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement slurry, over & including 20 mm thick screed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite slab including rubbing and mirror polishing and moulding complete all as specified and as directed. Note: Granite stone shall be in one length not less opening size in Door / window in jambs & length shall be as per the length of cill & jamb of door/ windows), etc.

S&F 12 mm thick toughened glass door, area exc 1.5 Sqm each, edges with diamond cut including fitting such as floor door springs, SS pivot, best quality stainless steel 450mm long handle, etc with solar film, acid etching & logo (as approved), PVC sealing as in doors with & including locking arrangement complete all as specified and as directed.

S&F 12 mm thick toughened glass panels exc 0.5 Sqm each, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws/fittings etc as in partition wall with deep acid etching complete all as specified and as directed.

S&F in repair mortice lock 100mm 6 lever suitable for toughened glass door with duplicate key and handle set complete all as specified and as directed.

S&F as in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, GI frame work & hanger of any dia etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and as directed.

M&L 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh 1.40mm dia & 12mm mesh & metal frame work & finished the same as existing complete all as specified and as directed.

S&F mineral fibre ceiling boards 16 mm thick, 600 mm x 600 mm size including grid 25 x 25 x 1.6 mm thick GI powder coated wall angles and 25 x 35 x1.6mm size T runner suspended at 1200 mm centre to centre and cross T runner of 25 x 35 x 1.6mm size suspended at 600 mm centre to centre supported by 2 mm dia GI wire from roof/ slab including wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600 mm x 600 mm ceiling etc complete all as specified and as directed. (Make : Armstrong RH Dune 99 or Equivalent of Aerolite/ Dexun/ Anchor)

Excavation in post holes (or similar holes) in hard or dense soil, each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & well ramming and removing surplus soil out side the premises & making good surface complete all as specified & as directed.

M&L RCC 1:1 ½ :3 type B-1, using 20 mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slab, under reamed piles and mass concrete complete all as specified & as directed.

M&L RCC 1:1 ½ :3 type B-1 using 20 mm graded stone aggregate as in columns, pillars, piers, post & struts etc complete all as specified & as directed.

M& L High Yield Strength, Deformed, Mild steel TMT bars, Fe-500 grade, 5mm dia and over up to and including 10mm dia, as in stirrups spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.

Use and waste of formwork to sides of concrete foundations, plinth beams, footings, base of columns, pile caps and similar work, vertical or to batter, for rough finished surfaces complete all as shown on drawings and as specified and as directed.

Use & waste of formwork to sides of concrete pillars, posts, struts, piers, columns and stanchions and similar work, square, rectangular or polygonal, rough finished surface complete all as specified and as directed.

S&F MS tube, factory moulded to the shape required, medium grade of 90mm & 50mm bore of tube including fittings, screwing, cutting, welding, soldering, drilling as required in any position and description etc complete all as specified and as directed. (Note: Column shall be factory moulded to semi circular shape)

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channel complete all as specified and directed.

M&L Dholpur stone cladding, gang saw cut, with machine cut edges, 25 to 30mm thick, uniform colour of each stone size exceeding 0.25 Sqm area and not exceeding 0.5 Sqm, fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape, one number dash through fastener 12mm dia, 150mm long in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment, over & including 15mm thick rendering in cement mortar 1:4 & pointed with an admixture of white cement and Dholpur stone dust 1:1 complete all as specified and as directed.

M&L in replacement point wiring (suitable for modular switches ) for one light/fan point, controlled by one switch, 5 Amps, one way, single pole complete with 1.5 Sqmm, single core, multi stranded, copper conductor PVC insulated, FRLS, unsheathed cable, 1100 Volts grade, drawn through and including rigid, non-metallic, 25mm dia PVC Conduit, concealed in walls including modular terminal box and cover plate with frame, concealed in wall including 1.5 Sqmm size PVC insulated, unsheathed, 1.50 Sqmm copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

All as per item No. 103.00 here in before but one three pin 5 Amps socket out let on independent board complete all as specified and as directed.

All as per item No. 103.00 here in before but one three pin 5 Amps socket out let on independent board complete all as specified and as directed.

All as per item No 103.00 here-in-before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire with 2.5 Sqmm single core cable for one 3 pin, 15 Amps socket out let point on independent board complete all as specified and as directed. Note for item Nos 103.00 to 106.00:- Cost of modular plate with frame and flush box of suitable size shall deemed to be included in rate quoted by the contractor.

S&F in replacement Switch modular type 6 Amp, 230 Volts, one way, single module complete all as specified and as directed.

S&F in replacement Switch modular type 16 Amp, 230 Volts, one way, single module complete all as specified and as directed.

S&F in replacement socket Modular type 6 Amp, 2/3 pin, 2 module, 230 Volts complete all as specified and as directed.

S&F in replacement socket modular type 6/16 Amp, 2/3 Pin, 2 module, 230 Volts complete all as specified and as directed.

S&F in replacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and as directed.

Supply, fixing and connecting PVC body, ventilating fan, 250 mm sweep, 1200 RPM, 240 Volt, AC, with sturdy blades, fully plastic body, with louver shutter, sound proof including connection with flexible PVC Copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to ventilating fan including nut bolt and washers of suitable size complete all as specified and directed. Make- Havells model Ventil air DX white/ Bajaj/ Philips/ Crompton/ Usha

Supply, fixing and connecting in replacement Heavy duty, Air circulating wall mounting fan, single phase, 1440 RPM, 450mm sweep, including connection with flexible PVC Copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to air circulating fan complete all as specified and as directed. Make- Almonard/Bajaj/CG/Usha Note: Old unserviceable fan shall be deposited by the contractor in MES store yard being Govt Property.

Supply, fixing and connecting in replacement single phase, 230 volts, 50 Hz, wall mounted fan, 450 mm sweep, fixing on wall with fan clamp/hook, including connection with flexible PVC Copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to wall mounted fan complete all as specified and as directed. Note: Old unserviceable fan shall be deposited by the contractor in MES store yard being Govt Property.

M&L in replacement sub main wiring with 2 runs of 2.50 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 2.50 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

M&L in replacement sub main wiring with 2 runs of 4.00 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4.00 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

Supply, fixing and connecting in replacement energy efficient, 4X1 feet, panel, ultra modern, recess mounting, LED luminaries with high brightness, 36 Watt, Aesthetically designed, LED flat panel, with electronic driver suitable for ceiling including connection with flexible wire and all fixing accessories complete all as specified and as directed. (Make - Havells Cat Part No PLUTONEO4X1PLR36WLED857S or equivalent model of Make mentioned in PS)

Supply, fixing and connecting in replacement Surface/Wall Mounted, 20 Watt, integrated LED, 4 feet Fitting, with polycarbonate housing & opal diffuser finish, Integral electronic driver with Output short circuit protection, Surge Voltage Protection of minimum 3 KV and Safety test as per IS15885 Part 2/ Sec 13. Total system Lumen shall be 2000 or above in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy 100 Lm/w, THD(%) < 20, complete with all accessories as required complete all as specified and as directed. Make - Havells Cat part No - LUMILINEBS20WLED865SPCWH or equivalent model of Make mentioned in PS.

Supply, fixing and connecting in replacement LED Flood light, 50Watt, exclusive innovative die-cast aluminium, IP65, flood light fitting suitable for highlighting architectural facade and general purpose lighting including MS bracket and suitable size of nut & bolts fixing accessories, connection with flexible wire with all fixing material complete all as specified and as directed. Make- Havells Cat part No JETACOMPECTOFL50WLED757LTG or equivalent model of Make mentioned in PS.

S & F in replacement distribution board, double door type, SPN, 8 way, with acrylic door suitable for housing of MCBs, including 100 Amps rated copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. Make -Legrand Cat No -5076 21 or Equivalent model of Make mentioned in PS.

S & F in replacement MCB, SPN, 240 Volts, 63 Amps, 16 kA, 'C' Curve complete all as specified and as directed.

S & F in replacement MCB, SP, 240 Volts, 6 to 16 Amps, 10 kA, 'C' Curve complete all as specified and as directed.

S & F in replacement Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings, fixed in position complete all as specified and as directed.

S&F in replacement LED Lamp, 9 Watt B-22 Cap complete all as specified and as directed.

Supply, installation, testing and commissioning UL Listed/Certified Repeater Panel with minimum 4 line X 40 Characters alphanumeric LCD display with all commands for programming such as Reset, Mute, Silence trouble acknowledge complete as required complete all as specified and as directed. Make: Model No. ULCF3000PRG of Make Cooper or equivalent model of Siemens/ Notifier.

Supply, laying, connecting and testing XLPE insulated, PVC inner sheathed, armoured, LT cable, ISI marked with copper multistranded conductor, 1100 Volt grade, 1.5 Sqmm, 2 core, laid in conduit complete all as specified & as directed.

S&F Rigid, non-metallic, PVC conduit, medium grade, 25mm bore, including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.

Supply, laying, connecting and testing armoured, copper cable, jelly field, 20 pairs, laid in conduit complete all as specified & as directed.

Supply, installation, testing and commissioning two-way counter communication system, exclusively designed for easy and effective conversation across counters with transparent security barriers, consisting of an attendant unit, a customer unit and a power supply unit and easy to install and simple to connect through dedicated cables as supplied with the system, two -way hands-free communication, compact & elegant table top attendant unit with 20" long gooseneck microphone for strain-free usage, separate controls for adjusting the speech levels during Talk & listen modes of operation, special Auto -Mute ON/OFF option provided through a toggle switch, In Auto -Mute ON condition, the customer microphone is partially muted if it is not used for 30 sec approx. This facility prevents the attendant from being disturbed by unwanted outside noise, The customer's unit shall have an efficient speaker and a sensitive condenser cartridge, Attendant's microphone shall have voice priority over the customer's microphone complete all as specified & as directed. Make -AHUJA model CCS2300 or equivalent model of SONY/ PHILIPS/ Honey bell

Supplying, laying and connecting in replacement GI tubing 80mm bore, light grade with all fittings with screwed and socketed joints and fixed complete in trenches, wall, ceiling or laid in floor and making good the disturbed surface complete all as specified and as directed.

Supply, laying connecting and testing XLPE insulated, PVC inner sheathed, armoured, heavy duty, LT underground cable, ISI marked with aluminium multistranded conductor 1100 volt grade of size 10 Sqmm, 2 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole/wall with saddles including cable connecting lugs, glands, jointing/fixing materials complete all as specified & as directed.

S&F high power LED, 40W, energy efficient, decorative post Top lantern fitting, IP 65, die cast spigot, spun aluminium powder coated top cover and clear acrylic diffuser, aesthetically designed with symmetrical light distribution, landscape luminaries with high power LEDs colour temp 6500K , SMD type 100-240VAC, 50 Hz along with driver and lamp holder including all accessories complete, fixing accessories and clamp, fixed in position including necessary PCC work and excavation as per manufacture's instruction complete all as specified and as directed. Make:- Halonix cat part No HLPT-03-40W-CW or equivalent Model of Make mentioned in PS.

Supply, laying connecting and testing in replacement PVC, XLPE insulated, unsheathed, flexible, multistranded, fire retardant, low smoke, copper conductor, 400 Sqmm, LT cable, 1100 Volts, conforming to IS 694, single core, drawn in and including metallic flexible conduit of suitable size along wall or into existing cable tray from existing alternator of DG set to ACB of AMF LT panel in sub station with suitable lugs, thimbles, jointing/fixing materials etc complete all as per site requirement, as specified and as directed. Notes:- (i) All necessary T&P shall be arranged by the contractor at his own cost. Rate quoted by the contractor shall deemed to be inclusive of All T&P & sundries. (ii) The entire work shall be executed on Saturday/Sunday/ holiday during day & night with written shutdown and prior permission of user only. The Contractor shall ensure to make the entire electric supply functional on each working day before 0600 hrs before leaving site of the restricted area.

VINAY ENTERPRISES

SETHI ENTERPRISES

national engineering

JIWAN DASS THAREJA AND SONS

Shri Radhakrishna Associates