Dismantling the existing damaged ground floor building works at NMS Lakshmi annual high school at kamarajar salai American mission lane in ward 46

Amount

Dismantling the existing damaged Reinforced cement concrete including removal of demolish materials and all labour charges and conveyance charges etc.complete.., TWAD- DATA-P-289-SL No:XXX

Dismantling the existing damaged brick masonry wall under 3m hight including removal of demolish materials and all labour charges and conveyance charges etc.complete.., TWAD- DATA-P-289-SL No:XXX

Picking the existing cement plaster surface.

Plastering with cm 1:3 (one cement three sand) 20mm thick.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. MDU-CORP-BUILDING DATA-P-53-SL No:80

Painting two coats with approved black oxide for old Black board over the cement plastered surfaces

Painting Two Coats on Old Iron Work with best synthetic enamel paint of approved colour and quality etc., (Corporation Data Page No-57, Sl.No-95)

Painting old wood work with two coat of Synthetic Enamal paint of approved quality

Fabrication supply and fixing of fully paneled double leaf steel door made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc… For Door

For Window

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by usingminute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and makingornamental designs as per the site condition and asdirected by the departmental officers.

Wiring with 2 x 2.50 Sq.mm PVC unheated sc Aluminium cable of 650 V. grade in suitable PVC rigid pipe in wall on ceiling with PVC assceries with T.W. switch box in flush with wall covered with hylum sheet 3mm thick with painting of suitable colour with 14 S.W.G.T.C wire for light point and fuse point (SD 20 A)

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set

Supply and fixing of 20W 4 Feet LED fitting with LED.

Plain Cement Concrete using C.C.1:1.5:3 using 20mm broken stone

Add GST 18%

C SATHIYASEELAN (BID ID -1435332)