Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC 158 ARATH BAZAR KASAULI 173204 HP | KASAULI | SOLAN | HIMACHAL PRADESH | 173204 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹39.9 L+₹35,399 (0.90%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹41.7 L+₹2.2 L (5.52%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
6 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh. Rahul Meena, IDSE, EE, Garrison Engineer, CEA
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
COMPLETION OF LEFT OVER WORKS FOR REPAIR/ REPLACEMENT OF CI/GI/MS DISTRIBUTION PIPE LINES OF VARIOUS SIZES AND OTHER MISC FOR SPRING NO 1, 2 AND 3 AT DAGSHAI UNDER GE KASAULI
2024_MES_642563_1
GEK-111/2023-24
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
Item Rate
180 days
DAGSHAI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹88,000
Yes
14 Mar 2024
15 Feb 2024
13 Mar 2024
15 Feb 2024
6 Mar 2024
1 Mar 2024
Amount
Schedule 'A' Section - I
Excavation in trenches in hard dense soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out complete all as specified and directed.
Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed.
Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed.
Taking out unserviceable/defective/damaged/blockage GI pipe 80 mm bore steel water tubing,sorting out serviceable pipe fitting for reuse and cleaning the pipe including fitting and removing away all unserviceable pipe from site, complete all as specified and as directed. (Note: Exacavation and earhwork shall be measured and paid for separately.)
All as per serial item No. 4.00 here-in-before but of size 100mm bore -ditto-.
S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 80mm bore with and including all fittings such as bends , elbows,tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed.
All as per serial item No. 6.00 here-in-before but of size 100mm bore, complete all as specified and directed.
S & F in replacement, Cast iron Rising Sluice valve PN1.6 as per IS-14846, body, dome, wedge-CI IS:210, rings-bronze IS:318, Spindal-SS IS:6603, Gland Packing greasy jute packing, fasteners-CS, Gasket- Natural rubber, nominal size DN-150 mm, both ends flanged in existing line, after removal of old unserviceable sluice valve without damaging to existing pipe line and testing complete all as specified and directed by Engr-in-charge. Note : Suitable size flanges for existing pipe line, Joints and jointing materials shall be included under this item.
Taking out old unsv water meter and Supplying, fixing and testing of Electromagnetic Flowmeter integral type display with rubber lining of size 50mm bore compatible with online water quality and flow monitoring system measuring tube material SS 304 , accuracy +/- 0.5% installed at pumping/gravity line , flange type end connection, flange standard conforming to ANSI 150, bidirectional measuring range 0.2 to 12m/sec, working pressure 25kg/cm sq. , Std. output 4 - 20 mA , IP 65 protection class for sensor with graphic display complete all as specified and directed by Engr-in-charge. NOTE: The above job includes making all connections with suitable size wires from nearest electric supply DB box to water meter upto a distance of 15 mtrs and submit recorded initial meter reading to the Engr-in-charge. No additional payment shall be paid in this regard.
All as per serial item No. 9.00 here-in-before but of size 150 mm bore, complete all as specified and directed by Engr-in-charge. NOTE:The above job includes making all connections with suitable size wires from nearest electric supply DB box to water meter upto a distance of 15 mtrs and submit recorded initial meter reading to the Engr-in-charge. No additional payment shall be paid in this regard.
M & L for construction of brick masonary pit of size (60 x 60 x 60)cm internal size with MS sheet 3mm thick and angle iron frame of size 40x40x6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including locking arrangement, lifting handle and including excavation / earth work, PCC in foundation, brick work, plaster including demolition of existing pit complete all as specified and directed by Engr-in-charge.
All as per Srl item No.11.00 above but for masonary pit of size (90 x 90 x 90)cm complete all as specified and directed by Engr-in-charge.
All as per Srl item No.11.00 above but for masonary pit of size (120 x 120 x 120)cm complete all as specified and directed by Engr-in-charge.
Dismantling and taking out old flanged and drilled pipe line complete with all fittings and flanged joints,150mm dia, including necessary excavation, returning and filling etc complete, removing unserviceable from site and transporting out of site complete all as specified and directed by Engr-in-charge.
Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 168.30 mm, with nominal wall thickness 7.1 mm and weight 28.22 Kg/ Rm, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/ culverts/ inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge. (iii) Any other expenses including permision from state authorities are included under this item.
Supplying, laying, jointing and testing bends, suitable length, radius as specified and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 168.30 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified snd directed by Engr-in-charge. NOTE:- As per item No-15.00.
Supplying, laying, jointing and testing of Tees, suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 168.30 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- As per item No- 15.00.
Supply and fixing heavy duty MS flange of nominal size DN-150, duly painted with two coats of black japan paint, for NPS-150 mm nominal size pipes, 36 mm thick, 345 mm outer dia, having 8 nos hole of size 33 mm drilled for M30 size bolts for jointing with existing pipes,duly welded with pipes/tees/bends properly to both the plain ends complete all as specified and directed by Engr-in-charge.
Supply and fixing Flanged joint for 150mm nominal size pipes comprising of one 3.0 mm steel reinforced compressed asbestos fibre gasket and 8 nos nuts, bolts of size M30 and 125 mm length and 2 nos washers 3 mm thick for each bolt to joint pipes/fittings/bends etc complete all as specified and directed by Engr-in-charge.
M & L for Cutting Seamless carbon steel pipe/ GI pipes in position and reducing to required length for insertion of new tees,branches, Mechanical Joints etc, all as directed. Size of pipe 80/100/150mm bore.
M & L for MS Special fitting of IS 1239 and thickness not less than 7mm fittings any type spigot and socket ends or flanged pipe as required at site (such as bend, taper, Tee, flange, socket etc) Socket end/ flanged as ordered of any size from 80mm to 450mm as required at site. (i) The weight of the fittings shall be measured and paid as given in relevant IS or actually provided which ever is less. (ii) The weight of the fittings shall be measured and paid as given in relevant IS or actually provided which ever is less. (iii) All fittings shall bear relevant IS stamping marking. (iv) Excavation and earth work shall be measured and paid separately. (v) Cost of the joints and jointing materials shall be deemed to be included in the relevant items of DI pipes here-in-before.
Taking down unserviceable sluice valve from existing position and supply and fixing Gear operated D.I. Sluice valve of 150mm dia bore, D.I. resilient (soft) seated gate valve with pocket less body, SS Stem (AISI 410), EPDM coated DI wedge 100% vaccum tight design with toroidal sealing rings & over 250 micron epoxy coating in PN 16 designed to BS:5163/IS:14846 Non-Rising stem type with gear wheel operation with including necessary arc/gas welding with flange as per existing pipe line , tail pics of MS Pipe as per site requirement not less than 350mm length, dia of tail peace as per existing pipe ,stainless steel spindle of suitable length including suitable size nuts, bolts, washer and rubber gasket all as required and directed at site.
All as per item No. 22.00 above but of size 80mm dia, Gear operated D.I. Sluice valve, incl taking down old unsv sluice valve complete all as specified and directed.
All as per item No. 22.00 above but of size 100mm dia, Gear operated D.I. Sluice valve, incl taking down old unsv sluice valve complete all as specified and directed.
Supplying, fixing and testing of high pressure, heavy duty ball type cast steel Non return valve/ check valve, nominal size DN-150 mm, PN 10, conforming to BS 1868, Class 600, suitable to hydrostatic test pressure for body 156 kg/sq cm & for seat 115 kg/sq cm, both ends flanged in existing line, after removal of old unserviceable non return valve without damaging to existing pipe line complete all as specified and directed by Engr-in-charge. Note : Suitable size MS flanges for existing pipe line, Joints and jointing materials shall be included under this item.
Dismantling of defective/unsv 150 mm nominal size pipe line and taking out from trenches with necessary excavation work and carrying out the repair work at site or local work shop for welding work to repair defective portion of pipe line and providing leak proof jointing material to leaked/pierced portion and took back after repair to work site complete and relaying of repaired pipe line 150mm bore in trenches and jointing the same in trenches complete with new gasket, nut bolts and other jointing material including testing/commissioning the pipe line on full pressure complete all as specified and directed by Engr-in-charge. NOTE for Srl Item Nos 26.00 & 27.00 :- (i) MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out at various locations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge.
All as per Srl Item No. 26.00 above but for nominal size of pipe line 100mm dia, complete all as specified and directed by Engr-in-charge.
M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate for anchorage blocks for pipe line/making good the cut portion of roads/paths/hard standings etc including necessary from work where required , to support the pipe line complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement Cast Iron Air Release Valves with double air Outlets, conforming to IS 14845 of size 80 mm dia bore and fixing up in seamless carbon steel pipe supply mains of size 150 mm dia complete all as specified and qty as per requirement and as directed by Engr-in-Charge.
S & F in repair/replacement Steel reinforced compressed asbestos fibre gasket of 3.0 mm thickness for 150mm nominal size pipes comprising of suitable holes for attachments, complete all as specified and directed by Engr-in-charge.
M & L for clearing away all grass vegetation, saplings, shrubs, creepers, undergrowth, and roots, cleaning the area and removing rubbish upto a distance of 50 metres outside the periphery at spring and various locations all as directed by Engr-in-charge.
Amount of credit of Rs. 199540.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
Ayushmat Contractors
Sagar Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .