Restoration of Damage direct outlet at RD.116.580 km Right side of Kandi canal stage -2.

Amount

(2) Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Earth work upto 1.5 m. Depth for

All classes of soil except rocky

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

C.I Single air valve screwed (Size 50mm)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.( For D-choking of block pipes)

Capacity of Air compressor 300 cfm at 250 PSI

BRICK WORK First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

12.5 mm thick cement plaster 1:4

Cement rendering on plaster 1mm thick

CONCRETE Cementconcrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type

STEEL AND IRON WORK Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing, Laying , fixing & jointing of u P.V.C. socketed type Pipes 110 mm dia upvc pipe 2.5 kgf/sqcm pressure as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm

Providing, Laying , fixing & jointing of uP.V.C. socketed type Pipes125 mm dia. upvc pipe 2.5 kgf/sqcm pressure as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm

Providing, Laying , fixing & jointing of uP.V.C. socketed type Pipes 160 mm dia. upvc pipe 2.5 kgf/sqcm pressureas per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm

Providing, Laying , fixing & jointing of u P.V.C. socketed type Pipes180 mm dia. upvc pipe 2.5 kg/sqcm as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm

Providing, Laying , fixing & jointing of u P.V.C. socketed type Pipes 200 mm dia upvc pipe 2.5 kg/sqcm pressure as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm

Providing, Laying , fixing & jointing of uP.V.C. Socketed type Pipes 225 mm dia. upvc pipe 2.5 kgf/sqcm pressure as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm

Providing, Laying , fixing & jointing of uP.V.C. socketed type Pipes 250 mm dia. upvc pipe 2.5 kg/sqcm pressure as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. pipe of 2.5 Kg. /sqcm

Providing & fixing ISI Marked . 110 mm dia. alfa Valve

Providing & fixing ISI Marked . Alfa Valve 125 mm dia.

Providing & fixing ISI Marked . Alfa Valve 160 mm dia

Providing & fixing ISI Marked . Alfa Valve 180 mm dia.

Providing & fixing ISI Marked . Alfa Valve 200 mm dia.

Providing & fixing ISI Marked . Alfa Valve 225 mm dia.

Providing & fixing ISI Marked . Alfa Valve 250 mm dia.

Providing & fixing uPVC 125 mm dia. upvc 6 kgf/sqcm pressure long Bend conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D.

Providing & fixing uPVC 160 mm dia. long Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing uPVC long Bend 180 mm dia (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing uPVC Long Bend 200 mm dia. (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing 225 mm dia. uPVC Long Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D.

Providing & fixing 250 mm dia. uPVC Long Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Any Other Item

GURINDER PAL SINGH CONTRACTORS