DG HINGNA INDUSTRIAL AREA M and R to PWSS at

Amount

Chlorinator

Servicing and overhauling of Job chlorinators for a period of one year including a) Every month visit for periodical maintenance of chlorinators, checking them for proper functioning and routine checkup including minor consumables required. b) Attending breakdown calls if any apart from the routine regular monthly visits.

Supply of Spares for Chlorinators and related piping system as under:-

(Technical Sanction No 137123SECN for August 2023 ) Filter made from schedule 80, A106, Grade B, carbon steel

(Technical Sanction No 137123SECN for August 2023 ) Ejector body.

(Technical Sanction No 137123SECN for August 2023 ) Ejector Diaphragm assembly

(Technical Sanction No 137123SECN for August 2023 ) Needle valve

(Technical Sanction No 137123SECN for August 2023 ) Actuator for Diaphragm type pressure gauge

(Technical Sanction No 137123SECN for August 2023 ) Inlet Valve Spring made of Hastelloy

(Technical Sanction No 137123SECN for August 2023 ) Vacuum Regulator PTFE Diaphragm Assembly.

((Technical Sanction No 137123SECN for August 2023 ) NRV for vacuum tubing with suitable connectors..

(Technical Sanction No 137123SECN for August 2023 ) 3/8* 18G, PVC coated copper tube with stub enf and brass nut-6 feet long

(Technical Sanction No 137123SECN for August 2023 ) O ring set / Gasket set

(Technical Sanction No 137123SECN for August 2023 ) Ejector Inlet adaptor & Rotameter outlet adaptor with nut

(Technical Sanction No 137123SECN for August 2023 ) Inlet and outlet piping set with fitting like Unions, valves etc complete

(Technical Sanction No 137123SECN for August 2023 ) filter Elbow and Tee

(Technical Sanction No 137123SECN for August 2023 ) Diaphragm type SS pressure gauge

(Technical Sanction No 137123SECN for August 2023 ) Inlet water SS pressure gauge with Tee and adaptor.

(Technical Sanction No 137123SECN for August 2023 ) Filter to regulator copper tube with stub end and brass nut

(Technical Sanction No 137123SECN for August 2023 ) Borosilicate glass tube with Teflon float.

(Technical Sanction No 137123SECN for August 2023 ) Inlet Ventur

(Technical Sanction No 137123SECN for August 2023 ) Outlet Venturi

(Technical Sanction No 137123SECN for August 2023 ) Inlet Valve body, cap and Pin.

Supply of Yoke clamp & tonner key

Providing , erecting & Commissioning of Chlorine Trap made of 100 mm dia seamless steel pipe with chlorine control valve with mounting plate & necessary hardware to mount on wall/frame with necessary copper pipe etc complete

Providing, erecting, commissioning of new vacuum type floor mounted chlorinator of 5 Kg/Hr capacity including-Filter unit made of schedule 80A 106 grade B carbon steel, -inlet copper tube with stub end and brass nut length 2 mtrs-filter vacuum copper tube with stub end & brass nut, inlet valve assembly having PTFE seat and Hastelloy spring, -Vacuum regulator with PTFE diaphragm assembly PVC front and back body,. Rotameter made out of PVC with borosilicate tube Teflon float and flow control valve spindle made of PVC, -PVC tubing with nuts form vacuum regulator to rotameter., ejector assembly containing ejector block of PVC venturi set NRV gas NRV water drain and inlet water gauge, -Vacuum tubing, fiber board with angle set, chlorine pressure, inlet /outlet piping with isolation valves up to as required length with foundation along with all required accessories complete

Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (Monoblock), 415 V, three phase, 50 Hz, A.C. supply of 3.75 kW/5 HP with discharge 715/200 lpm for head of 17/39 m and 65 mm suction/50 mm delivery pipe on provided CC foundation as per specification no. WP-CGP.

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply for 10 H.P.

Rebate for old chlorinators including dismantling complete.

Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 40/50 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 50mm dia. gun metal foot valve at position with necessary materials complete.

Supplying, erecting, testing and commissioning of dewatering Monoblock pump set 415 V, three phase, 50 Hz, A.C. supply of 5.5kW/ 7.5 HP of 21 to 36 m head with 910 to 190 lpm discharge, 14.5 mm Solid handling capacity, non-clogging minimized abrasive wear, large impeller clearance & maintenance free pump set with waterproof cable duly sealed with epoxy material built in protection to prevent the motor from burn out due to abnormal operation. specially designed high efficiency motor with F class insulation & the pump mechanically sealed in the oil chamber, etc. complete as per specification no. DWP- SMP.

DELTA TEKNOTIDE PVT LTD (BID ID -6747925)