Development of Green Spaces near Government Quaters Altinho under Smart Cities Mission at Altinho Panaji Goa

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m. a. Ordinary soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas( exceeding 1.5 m in width or 10 sq.m. on plan) of all type of strata comprising of any type of material such as soil ,silt,clay, sand, gravel, murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock,ordinary rock, disintegrated rock,fissured/shattered rock, decomposed rock, weathered rock and all such material either in full or part as the case may be adopting any method/ methods as may be convenient or permitted (blasting prohibited) including chiselling ,wedging,etc., in all conditions such as dry , moist, foul, saturated, submerged, etc., as directed by the Engineer etc., all complete including dressing of side ramming bottom, all leads and lifts, getting out excavated soil & stacking as directed , pumping and bailing out water, barricading,danger lighting, guarding as directed .

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means( not exceeding 1.5 m in width or 10 sq.m. on plan) in trenches for all leads & lifts in all type of strata comprising of any type of materials such as soil ,silt,clay, sand, gravel, murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock,ordinary rock, disintegrated rock,fissured/shattered rock, decomposed rock, weathered rock and all such materialeither in full or part as the case may be adopting any method/methods as may be convenient as permitted excluding blasting in all conditions such as dry, moist, foul, saturated, submerged, etc,. including dressing of sides, planking & strutting, timbering ,ramming of bottom ,pumping and bailing out water ,barricading danger lighting guarding, getting out excavated soil & stacking as directed by Engineer for all leads & lifts etc. complete

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Disposal of debris at all leads and lifts, building rubbish, unservicable material to the Contractor's identified dumping location, required statutory approvals and all costs. (Contractor shall identify the location and take all required Approval to indemnify PMC & Employer) including unserviceable earth

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. In pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand ). Upto foundation and plinth

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:a All works upto plinth level

Providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including the cost of centering, shuttering and finishing with (1:3 cement :sand mortar) for Kerb Stones

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone aggregate 20mm nominal size)

Centering & shuttering including Strutting, Propping & removal of forms for : i) Foundations, Footings, Bases for columns

Centering & shuttering including Strutting, Propping & removal of forms for :ii) Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Providing TMT steel reinforcement bars (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete.

18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster1:5 (1cement: 5 coarse sand ) and top layer 5 mm thick with cement plaster 1:3 ( 1 cement :3 coarse sand ) finished with sponge. (External)

Neat Cement punning

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (including applying one coat of cement primer and one coat of surface treatment etc. complete. On new work

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size 250mm x 62.5mm x 60mm and design/shape(Warwick type ) or equivalent laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer in charge. Blended

Providing and fixing Azulejos Hand Painted Tiles One Colour or Multi-Coloured Design (150mm x 150mm) on the column face. The tile to be placed along with cement mortar 1:3 and joints to filled with joint filling materials, complete as directed by the Engineer-in-charge.

Providing and laying 36mm thick SBR with EPDM Insitu Rubber Flooring of approved make for Outdoors gym areas (Non weight training areas). Rubber flooring to be layed over the RCC slab of 150mm thickness complete as directed by the Engineer-in-charge.

Providing and fixing M.S. grill of required pattern in railing over top of compound wall etc. with M.S. flats square or round bars with M.S. holdfast embeded in concrete (1:2:4)

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand :4 granitic or basaltic aggreate 20mm nominalsize) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing supply & installation of 18mm thick WPC Profile Cut Planks placed equidistant considering 14nos planks for span of 3.10rmt c/c of SS vertical poles, planks fixed to SS Frames with Adhesive Glue to fix WPC to Stainless Steel, & SS 304 fasteners including transport handling etc complete (Excluding cost of stainless steel framing ).

Providing & Supply of Pure Polyester White Colour Powder coating of 60 Microns on SS, MS Tubes/Flats/Angles/Channels sections or any other surface including packing & forwarding etc complete. (For measurements purpose surface area of sections shall be considered).

Providing supply & Fabrication of SS 316 Grade Structure for Railing, Fencing, Roof Structures using Tubular/Circulaar Sections, Angles, Flats plates including Welding, Granding, Buffing etc complete.

Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. a. Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity.

Providing and installing the exercise equipments in the Open Gym Area on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. Equipments includes Air Walker Double-1No, Back Shaper Rower- 1No, Sky Walker-1No, Tai Chi Wheel- 1No, Standing Triple Twister-1No, Push Up Bar- 1No, Chest Press Double- 1No, Shoulder Press Double- 1No;

Badminton Court (5 Layers: Supply and apply of cushion sports flooring having one coat of Water based PU Primer, One coat of Resurfacer, One layer of Pre – Base color Coating, One coat of Top coat Two Component of water Based PU), Final Coat, Line marking. Applied on Concret surface after cleaning of surface and removing all dust and lose particles from the surface

Providing and fixing Imported 1 pair of Poles with Net, 4 water Pusher for mopping and cleaning the courts after wash and rain as per the direction of Architect / Engineer in charge

Providing and fixing 30MM Basket Ball Board "A" Grade Board 100% Virgin Monomer with iron ring and net as per the direction of Architect/ Engineer in charge

Providing and fixing signage made from Two side aluminium composite panel of size as per detail dwg. & colour as aprroved by the Architect with vinyl pasted laqquering of letters varying mtr height with necessary base support anchoring and having a coat of metal primer and a as per specs. All works complete including scaffolding etc. as per the drawings and the direction of the Engineer-in-charge.

Providing and installing garden benches of size 5ft x 1.5ft -18 Gauge stainless steel of approved design over a bed of cement concrete (1:4:8) as per the drawing including excavation in foundation , proper hold fasting etc Complete as per the direction of the Engineer-in-charge/ Architect

Providing & fixing Heavy duty RPVC pipe for main & submain including excavation, backfilling etc.a. 63 mm dia

Providing & fixing Heavy duty RPVC pipe for main & submain including excavation, backfilling etc.b. 50 mm dia

Providing, laying and jointing with liquid cement specials for PVC pipes a. 90° bends 63mm OD

Providing, laying and jointing with liquid cement specials for PVC pipes b. 90° bends 50mm OD

Providing, laying and jointing with liquid cement specials for PVC pipes c. Tees 50mm x 50mm

Providing, laying and jointing with liquid cement specials for PVC pipes d. 50 OD ball valve taflon

Providing, laying and jointing with liquid cement specials for PVC pipes e. 60 OD ball valves tafllon

Providing flexible braided PVC pipes in 30m lengthsalong with accessories complete a. 20mm dia with capit valve and riser

Proving & laying PCC 1:2:4 for anchoring the pipeline 0.30m x 0.10m all around the pipe at bends at 5m c/c

Filtration Unit a. Providing and installing Super Flow sand Filter 25m³/hr 2”

Filtration Unit b. Providing and installing screen filter 25m3/hr

Filtration Unit c. Providing and Fixing C. I. Non Return Valve 2.5"

Filtration Unit d. Providing and Fixing Pressure Relief Hydraulic Valve 2”

Rotars & Accessories a. Providing long distance rotary popup sprinklers

Rotars & Accessories b. Providing and installing 10 cm (4") Popup Spray Body

Rotars & Accessories c. Providing and installing 4.6 m Radius adjustable Arc Nozzle sprinklers

Rotars & Accessories d. Providing and installing 5.2 m Radius adjustable Arc Nozzle sprinklers

Rotars & Accessories e. Providing and installing 1.5 x 4.5 M corner strip Left

Rotars & Accessories f. Providing and installing1.5 x 4.5 M corner strip Right

Rotars & Accessories g. Providing and installing 1.5 x 9 M Center strip

Rotars & Accessories h. Providing and installing 1/2" X 30 cm Standard Swing Joint, 4 Swing Elbows

Rotars & Accessories i. Providing and installing 3/4"X30cm standard swing joint

Rotars & Accessories j. Providing and installing Service Saddle 63 mm x 13/4"

Rotars & Accessories k. Providing and installing Service Saddle 50 mm x 1/2"

Valves & Accessories a. Double Action Air Release Valve 1"

Valves & Accessories b. Valve Box 9"

Valves & Accessories c. Providing and installing required 5Hp submersible pump and panel box

Automization:- Providing and installing FRP panel box cabinet(1 nos),IC 8 station control station with SP priventer(1 nos),Toggel switch(1 nos),2"Solinoid valves(9 nos),1 sq mm copper wire approx. 800m with conduiting along with fitting and charging of automization system

Site Clearance along with clearing of all unwanted vegetation including ground covers and weeds of any size and Rough dressing and making of mounds for all the soft landscape areas of soil development like lawn area, flower beds etc including trenching to a depth of 30cms breaking clods flooding with water, uprooting weeds from above area after 10 to 15 days of its flooding including disposal of uprooted vegetation as directed by the engineer incharge and then fine dressing for planting new grass ( fOR 12 MONTHS)

Supply and Filling with approved black garden soil and spreading of the same in soft landscape areas with layers of 20 cms thickness in sequence and depths as specified by consultants

Supply and stacking of local sand (Grading zone iii or coarser) dump manure (cowdung) on site along with stacking on site of Good earth (Good earth supplied and already quantified ) including mixing earth, sand and cowdung in proportion of 7: 2.5 : 0.5 (7 parts of good earth to 2.5 parts of sand to 0.5 part of cowdung) or as directed by the engineer incharge and then spreading over lawn areas as well as filling in excavated pits, planters, flower beds etc in required thickness as per specification or as directed by the engineer incharge and carriage up to 200 m lead

Maintenance of all the soft landscape areas such as lawn trees, shrubs, palms, cycas ferns specimen plants, bamboos ground creepers/climbers etc as per horticultural specification excluding the cost of water irrigation system such as flexible pipes pumps for a period of 1 years from the date of issue of completion certificate by the Engineer in charge and sweeping of lawn and removal of dead leaves on every day basis for 12 months as specified by consultants and disposing of the same in an area as instructed on site, inclusive of supply and application of horticultural garden impliments such as lawn mower, bush cutter, secatures, equipments such as Budding/grafting knife, hedge shear, garden tools and rakes etc.

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 1. Sampurna - 19:19:19

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 2. Urea

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 3. Neem cake

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 4. MOP - Murrete of Pottash)

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 5. Micronuitrient +mix -

Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. Chloropyrifos - 20% EC

Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. Monocrotophos- 50%

Supply and Application of pesticides and insecticides as specified by consultant and as per horticultural specifications on site. Sevin Powder

Establishment of as per specifications MANURE based VERMI COMPOST - WITH PULVERISATION as instrucetd by consultants with regular sequence of works on site along with stome masonary edge on the perimeter size 4 mts x3 mts x 1 to 2 mts average as specifed in design.

Treatment of lawn areas with insectisides, pesticides by application of Lindane ( Zuari Agro Industries) and dithane -m-45 ( Bayer India Ltd) as per manufacturere's recommendation or specification and anti termite solution for lawn areas with chloropyriforos dust 1.5% atelast 3" to 5" below the surface of ground (intensity of dosage should be 1.5 kg per 100 sqm) as per specification or direction of the engineer incharge 1. Lindane

Treatment of lawn areas with insectisides, pesticides by application of Lindane ( Zuari Agro Industries) and dithane -m-45 ( Bayer India Ltd) as per manufacturere's recommendation or specification and anti termite solution for lawn areas with chloropyriforos dust 1.5% atelast 3" to 5" below the surface of ground (intensity of dosage should be 1.5 kg per 100 sqm) as per specification or direction of the engineer incharge 2. Dithane -m-45

Treatment of lawn areas with insectisides, pesticides by application of Lindane ( Zuari Agro Industries) and dithane -m-45 ( Bayer India Ltd) as per manufacturere's recommendation or specification and anti termite solution for lawn areas with chloropyriforos dust 1.5% atelast 3" to 5" below the surface of ground (intensity of dosage should be 1.5 kg per 100 sqm) as per specification or direction of the engineer incharge 3. Chloropyriforos dust

LT cables & Terminations:- Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (5)' 4 Core 16 sq.mm

LT cables & Terminations:-Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (3) 3 Core 4 sq.mm

LT cables & Terminations:-Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. '(5) 4 x 16 Sq. mm.

LT cables & Terminations:-Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 3 x 4 Sq. mm.

LT cables & Terminations:-Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (1) 3 Core 1.5 sq.mm

LT cables & Terminations:- Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

LT cables & Terminations:- Laying of one number PVC insulated and PVCsheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick ,protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata

LT cables & Terminations:-Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky strata

Panel:-Supply,installation,testing and commissioning of outdoor type feeder Panel as specified and complete with : a) Tinned copper busbars b) 7 tank pre-treatment c) Oven baked epoxy paint finish - RAL 7032 d) 3 nos. 6 A SP MCB , 1Nos 16 A TP MCB for control circuit, Internconnections, earthing etc. e)1 nos Digital Voltmeter and ammeter f) 1 nos RYB indicating lamps LED type. g) 1 nos. 16A TP MCB With 3 phase meter box sealable 'h) 1 nos. 25A 4P RCCB 'i) 6 nos. 06 A SP MCB j)2 nos -4 pole power contactor 440V 16A for time switch j) 2 nos -No Programmable Digital Almanac Timer Micro-controller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230/250V / 10A with 10 Hrs battery backup and manual over drive facility capable to drive different capacity contactors timer k) surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral

Earthing:- Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). '(a) In soily strata

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required

Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

LIGHT FITTINGS :Supplying and erecting 40W LED post top made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection on provided pole/ bracket.

LIGHT FITTINGS :Providing & erecting 4 m high galvanised conical pole with foundation bolts having bottom dia. from 115 to 130 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH-PL/CPL

LIGHT FITTINGS :Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

LIGHT FITTINGS :Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3m to 5m high octagonal /conical GI pole).

LIGHT FITTINGS :Providing & erecting 7 m high galvanised conical pole with foundation bolts having bottom dia. 145 to 175 mm, top dia. 65 to 75 mm on provided foundation as per specification no. OH PL/CP

LIGHT FITTINGS :Supplying and erecting LED Flood light fitting of 200W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2