CONSTRUCTION OF 6NOS F TYPE QTR G PLUS 2 AT CHC LOHISINGA

Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).

Earthwork in excavation of foundation in hard soil within 50m initial lead and 1.5mt. initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, supplying & working pumps & staking the excaveted materials away from the working area including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

Supplying and filling in foundation and plinths with sand well watered and compacted including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, watering, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.

Providing and laying plain cement concrete M10 (1:3:6) in foundation using 40 mm size black hard crusher broken granite metal of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes,cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge.

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Column Footing

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Column in Ground Floor

First Floor

Second Floor

Head Room

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Plinth Beam

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Lintel in Ground Floor

First Floor

Second Floor

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Beam in Ground Floor

First Floor

Second Floor

Head Room

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Chajja in Ground Floor

First Floor

Second Floor

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Stair Case in Ground Floor

First Floor

Second Floor

R.C.C. work of M-25 grade with 40mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Roof Slab in Ground Floor

First Floor

Second Floor

Head Room

Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in position as per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights).

First Floor

Second Floor

Head Room

Providing fly ash brick masonry work in foundation and plinth using 230 mm X 110 mm X 80 mm (with dimensional tolerance of + 8% ) fly ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.

Providing fly ash brick masonry work in super structure 0.250m thk using 230 mm X 110 mm X 80 mm (with dimensional tolerance of + 8% ) flyash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.

First Floor

Second Floor

Head Room

Providing 16 mm thick cement mortar 1:6 (1 cement : 6 sand ) on rough surface of masonry walls for all floors, including raking joints and scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and level and providing grooves as shown in the drawing, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.

First Floor

Second Floor

Head Room

Providing 6 mm thick cement mortar 1:4 (1 cement : 4 sand ) to R.C.C surface including close & deep chiping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves as shown in the drawing, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.

First Floor

Second Floor

Head Room

Providing 12 mm thick cement mortar 1:6 (1 cement : 6 sand ) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves as shown in the drawing, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge

First Floor

Second Floor

Head Room

Supplying, fitting & fixing of Vitrified colour printed series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only )

First Floor

Second Floor

Supplying, fitting & fixing of Vitrified colour printed series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

First Floor

Second Floor

Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.(Data for 10 Sqm )

First Floor

Second Floor

Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

First Floor

Second Floor

Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with epoxy gouut of of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. in Ground Floor

First Floor

Second Floor

Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge

First Floor

Second Floor

Head Room

Wall Painting two coats with Priming one coat with approved Water Bound Wall cement Primer on Plastered Surface in Ground Floor

First Floor

Second Floor

Head Room

Wall Painting two coats with Wall Painting two coats with approved Plastic Emulsion Paint Ground Floor

First Floor

Second Floor

Head Room

Providing and applying painting over the plastered surfaces with 2 coats of weather coat of approved quality and shade, using the required quantity as specified by the manufacturer over one coat of wall cement priming to give an even shade including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.

First Floor

Second Floor

Head Room

Supplying fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures

First Floor

Second Floor

Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtrs C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with coist, conveyance, taxes of all materials, labour and T&P required for the work all complete in all respect

First Floor

Second Floor

Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company.

First Floor

Second Floor

Factory made single leaf rigid PVC Door sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)

First Floor

Second Floor

Providing , fitting and fixing of 34 mm thick flush door shutter with 32mm thick BWR block board of century/green make and pasting 1mm thick laminate with anti- bacterial property of green Lam/ century to be pasted with adhesive including fitting and fixing of all fixtures like SS heavy duty aldrop , hydroulic door clousure, SS heavy duty tower bolt, vision panel, SS door stopper, SS shape handle etc ( make: dorma) of approved make including cost of all materials, all labour, all T&P etc. reqired for the work complete in all respect as per the direction of the engineer- in-charge.

First Floor

Second Floor

Painting two coats with approved Enamel Paint on Steel surface over a coat of Red Oxide Primer in Ground Floor

First Floor

Second Floor

Head Room

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor

INTERNAL P.H WORK Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes SDR-11 as per IS-15778/2007 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of transportation scaffolding etc. excluding GST as per specification and direction of Engineer-in-charge. 15mm dia

20mm dia

25mm dia

32 mm dia

Providing all materials, labour, T&P for laying/ fixing of following dia uPVC solvent welded pipes Sch-80 as per ASTM-D-1785 including fixing of required size uPVC Schedule-80 fittings as per ASTM D-2467 like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of transportation, scaffolding etc. as per specification excluding GST and direction of Engineer-in-charge. 25mm dia

32 mm dia

40 mm dia

Providing all materials, labour, T&P for fitting & fixing of following uPVC Ball Valves(CTS Sockets) (Schedule 80) in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of transportation scaffolding etc. all complete as per specification excluding GST and direction of Engineer-in-charge 25 mm dia uPVC ball valve

32 mm dia uPVC ball valve

40 mm dia uPVC ball valve

Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of all materials, curing, conveyance of all materials etc. all complete excluding GST as per specification & direction of Engineer-in-charge.

Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, duties etc. all complete as per specification excluding GST & direction of Engineer-in-charge. For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall

Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) 'P' or 'S' type of approved make as per IS-2556 with ISI mark in all floor including supply of sutaible PVC wall plug and Brass screws etc. all complete including cost of PVC seat cover (solid) with hinges & rubber buffers including testing etc. all complete with all cost, and conveyance as per specification all complete excluding GST as per direction of Engineer-in-charge. European Water closet With Cistern .

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 600 x 450 mm bowl depth 250 mm

Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin with pedestal of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete etc. including transportation etc. all complete excluding GST as per direction of EIC. Wash Hand Basin with Standard Pedestal of size (550x400 mm) .

Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 5mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, all materials complete as per specification excluding GST and direction of E.I.C. 600mm x 450mm size.

Providing, fitting and fixing of C.P. brass shower arm & C.P. brass shower rose with 15 or 20 mm inlet of approved make190 mm long heavy body with wall flange and pressure adjustable shower of approved make.

Providing, fitting and fixing of C.P. brass shower arm & C.P. brass shower rose with 15 or 20 mm inlet of approved make190 mm long heavy body with wall flange and pressure adjustable shower of approved make. 15mm dia Two-Way Bibcock with wall flange.

15mm dia Angle Stop cock with wall flange .

Providing and fixing 15mm dia CP Concealed stop cock.

C.P. Soap Dish Holder.

Health Faucet ABS SS braided hose 1.00m with CP hook.

32mm dia C.P. Dome Waste coupling (Full Threaded)

32mm dia kitchen/basin waste pipe

CP Grating.

Towel Ring.

Paper holder

Pillar cock

Swan neck Pillar cock

Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including transportation & scaffolding etc. all complete as per specification excluding GST & direction of the Engineer-in-charge. 110mm dia pipe

150mm dia pipe

Gully trap (300 X 300 X 450)mm (Inside) : Providing all material, labour, T&P and Constructing gully trap (Inner size 300mm x 300mm x 450mm depth ) with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design , foundation concrete (1:4:8), inside & outside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, brick work with flyash bricks having crushing strength not less than 75kg/cm² in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

Providing all material, labour, T&P and Constructing Inspection chamber (Inner size 750mm x 750mm x 500mm depth ) with RCC precast cover (1:1½:3) with 12mm size hg chips, foundation concrete (1:4:8), inside & outside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber as per specification.

Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Co-moulded Ring type) fittings of approved make confirming to IS-14735 with ISI marked in all floor with transportation & requisite testing as per specification excluding GST & direction of EIC. 110mm x110mm P-Trap

P.V.C. Floor trap 110 mm x 75 mm PVC (SWR)

Multiple floor trap 150 mm x 75 mm x 50 mm

110mmx87.5º Plane bend

110mmx87.5º door bend

110mmx45º Plane Bend

110mm dia single 'Y' withoutdoor

110mm WC connector/Bend with lip ring

110mm Socket plug

110mm Pushfit Coupler

110mm upvc vent cowl

Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge 2000 Litres Capacity for drinking work Polyethylene moulded water storage tank with lid & locking arrangement as per IS-12701/1996 with ISI mark.

EXTERNAL P.H WORK SEPTIC TANK Earth work in Hard soil of soil within 50m, initial lead and 1.5m, initial lift including rought dressing not exceeding 0.3m in depth and the earth transported by transport vehicles as directed by the Engineer-in-charge.

Excavation of foundation trenches and column foundation and pits of extra lift over the initial lift of 1.5 mtrs. but upto 3.0 mtr. Depth in all kind of soil as per direction of the Engineer-in-charge.

Filling foundation trenches and plinths with excavated materials in layers not exceeding 0.3 mtr in depth including watering and ramming and dressing and levelling etc. complete as per the direction of the Engineer-in-charge.

Filling in foundation trenches and plinths with filling sand, well watered, compacted, dressed and leveled to proper gradient etc., complete as per the direction of the Engineer-in-charge.

Providing and laying of P.C.C. of 1:3:6 with 4 c.m size hard granite metal in foundation trenches, under floors in line level including curing and ramming etc. all complete as per the direction of the Engineer-in-charge..

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hosting and laying with Centering & Shuttering etc. all complete as per the direction of the Engineer-in-charge. footing

Providing M.S reinforcement for R.C.C work including cutting, bending, and tying the grlls and placing in position including cost of binding wire 18 to 22 gauge etc. complete as per the direction of the Engineer-in-charge. Foundation plinth

Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % in cement mortar (1:6) in 230 mm thick wall, immersing the bricks for minimum 6 hrs in water before use, in foundation & plinth as per the direction of the Engineer-in-charge .

20 mm thick inside surface cement plaster(1:4) with neat cement punning

Providing Avg. 16 mm thick cement plaster 1:6 (1 cement : 6 sand) to outside surface etc., as per the direction of the Engineer-in-charge.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar

40 mm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips for old work. in Ground Floor

Providing and fixing 560mm dia pre-cast factory made man hole cover with frame. (Heavy Duty)

100 mm dia HCI vent with HCI bend and cowel

160 mm UPVC Tee

SOAK PIT Earth work in Hard soil of soil within 50m, initial lead and 1.5m, initial lift including rought dressing not exceeding 0.3m in depth and the earth transported by transport vehicles as directed by the Engineer-in-charge.

Excavation of foundation trenches and column foundation and pits of extra lift over the initial lift of 1.5 mtrs. but upto 3.0 mtr. Depth in all kind of soil as per direction of the Engineer-in-charge.

Excavation of foundation trenches and column foundation and pits of extra lift over the initial lift of 3.0 mtrs. but upto 4.5 mtr. Depth in all kind of soil as per direction of the Engineer-in-charge.

Filling foundation trenches and plinths with excavated materials in layers not exceeding 0.3 mtr in depth including watering and ramming and dressing and levelling etc. complete as per the direction of the Engineer-in-charge.

Filling in foundation trenches and plinths with filling sand, well watered, compacted, dressed and leveled to proper gradient etc., complete as per the direction of the Engineer-in-charge.

Providing and laying of P.C.C. of 1:3:6 with 4 c.m size hard granite metal in foundation trenches, under floors in line level including curing and ramming etc. all complete as per the direction of the Engineer-in-charge..

Fly ash Brick Masonry in Cement Mortar (1:6) using bricks of size (23 Cm. x 11 Cm. x 8Cm.) in foundation and plinth

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hosting and laying with Centering & Shuttering etc. all complete as per the direction of the Engineer-in-charge.

Providing M.S reinforcement for R.C.C work including cutting, bending, and tying the grlls and placing in position including cost of binding wire 18 to 22 gauge etc. complete as per the direction of the Engineer-in-charge. Foundation plinth

Providing Avg. 16 mm thick cement plaster 1:6 (1 cement : 6 sand) to outside surface etc., as per the direction of the Engineer-in-charge.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality S.F.R.C manhole with frame (600mm)

Providing and laying of brick khoa of size 40 to 50mm over the entire surface inside the soak pit to the full height compacted to a firm condition complete as per drawing.

40 mm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips for old work. in Ground Floor

RECHARGE PIT Earth work in Hard soil of soil within 50m, initial lead and 1.5m, initial lift including rought dressing not exceeding 0.3m in depth and the earth transported by transport vehicles as directed by the Engineer-in-charge.

Excavation of foundation trenches and column foundation and pits of extra lift over the initial lift of 1.5 mtrs. but upto 3.0 mtr. Depth in ordinary soil as per direction of the Engineer-in-charge.

Filling in foundation trenches and plinths with filling sand, well watered, compacted, dressed and leveled to proper gradient etc., complete as per the direction of the Engineer-in-charge.

Providing and laying of P.C.C. of 1:4:8 with 4 c.m size hard granite metal in foundation trenches, under floors in line level including curing and ramming etc. all complete as per the direction of the Engineer-in-charge..

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hosting and laying etc. all complete as per the direction of the Engineer-in-charge. (In foundation & plinth).

Providing M.S reinforcement for R.C.C work including cutting, bending, and tying the grlls and placing in position including cost of binding wire 18 to 22 gauge etc. complete as per the direction of the Engineer-in-charge. Foundation plinth & Ground floor

Fly ash bricks of 25 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % in cement mortar (1:4) in 230 mm thick wall, immersing the bricks for minimum 6 hrs in water before use, in foundation & plinth as per the direction of the Engineer-in-charge .

Providing Avg. 12 mm thick cement plaster 1:4 (1 cement : 4 sand) to inside surface etc. as per the direction of the Engineer-in-charge.

Providing Avg. 16 mm thick cement plaster 1:6 (1 cement : 6 sand) to outside surface etc., as per the direction of the Engineer-in-charge.

Providing and fixing 560mm dia pre-cast factory made man hole cover with frame. (Heavy Duty)

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 150MM dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

Providing C.I. Gratings in decking of size upto 150 mm dia for drainage of water as per approved design and specification including cost of all materials labour, T&P etc. complete as per specification and direction of Engineer-in-charge.

Providing ,Supplying, fixing, testing uPVC , pipes & fittings conforming to ASTM-D-1785 (sch-80) of approved make.Jointing with solvent cement solution as per ASTM-D-2564t & testing of joints complete as per direction of the Engineer-in-charge 100 mm nominal dia pipes.

Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion.

Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification excluding GST & direction of EIC. Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.

Cost of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete excluding GST & direction of the Engineer-in-Charge.

Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification excluding GST & direction of the Engineer-in-Charge.

Supplying all materials labour and T&P and grouting with cement slurry for Sanitary Sealing around the GI/PVC casing pipe up to 3 mtrs. Below ground level including cost of cement all complete as per the direction of Engineer-in-charge.

Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the department store in good condition.

Supply, installation & commissioning of borewell submersible vertical multistage stainless steel complete pump and water cool motor with Stainless Steel standard EN 1.4301 (AISI 304). Motor Dia should be 4 inches and 3 phase, 50 Hz, Enclosure class IP 68 and Insulation Class B, starting method direct on-line, 2900 RPM, Motor type MS 402, Rated Voltage 3x 380-415 V. The electrical Digital pump controller panel should be operated the pump automatically with require float switch controlled sensor for filling underground tank. Digital pump controller should be LCD screen displays, phase loss protection (incoming as well as for outgoing), Individual pump overload protection, individual pump under voltage protection, dry running protection, memory function when power off and during recovery, visual and audio alarm for fault prompt, auto manual switch and Enclosure Class IP 41. Recommended Motor of each pump : 1.5 KW , 3 Phase, 50 Hz, 2900 RPM, Water cool type.

Digital Pump Controller Panel 1.5 KW with 1 no float switch , Relay upto 8 Amps adjustable.

Electrical @ 5%

ELECTRICAL WORK Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. GROUP-A

GROUP-B

GROUP-C

Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision).

Supplying,fixing of 2 x 6A Plug on the separate board with complete fitting by 02 no of 6A switch & socket(modular type) (flame retradant type) with suitable size modular box & metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius )/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( flame retradant type) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) .(Incl. AC Point)

Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .

Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .as required as per direction of Engg.-in-Charge.

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)

S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand Myrius /Schneider(Zencelo)/Panasonic(Vision)

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 2 years.

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .

SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years

Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.

S/F of 63 amp ICDP Main switch of approved ISI Make (Anchor/ Havells/ L&T)

Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. S/F of 12 way Double door MCB DB (Make- Anchor/ Havells/Polycab/L&T)

Supplying and fixing 20 - 40 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year.

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.

S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.

Providing and fixing 6SWG G.I. wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed steel / PVC conduit as required.

Supply and fixing of tv cable RG-6 grade , 7mm solid conductor PE insulated shield with fine tined copper braid and protected with fr pvc sheath along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. A) 20 mm dia

Supplying and fixing telephone socket outlet modular type ISI marked on the existing switch board / cover including connections etc as requird.

Supplying and fixing T.V. antenna socket outlet modular type ISI marked on the existing switch board / cover including connections etc as requird.

Supplying and fixing of 16 / 18 SWG metal box of following sizes (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.

S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)

Supply & laying of 1x 2.5 mm2 sub main for Inverter wiring

Please Enable Macros to View BoQ information