Construction of Transit House at Khandapada

Earth Work in exavation of foundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect for the work as directed by the Engineer-in-charge.

Supplying & Filling foundation trenches , plinth & ditches with clean coarse river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking, royalties and all cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M 20 using 12 mm. to 20 mm. (½ to ¾ ) size (20 mm not to exceed 25) hard crusher broken granite stone aggregate of approved quality from approved quarry including hoisting lowering laying and compacting concrete watering curing centering shuttering and finishing the exposed surfaces smooth with all cost conveyance royalties taxes of all materials with all labour labour cess and T and P required for the work etc complete in all respect but excluding the cost and conveyance of MS rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting bending binding and tying the grills and placing in proper position and as per the direction of the Engineer in charge.

Column Super Structure Ground Floor

First Floor

Terrace Floor

Plinth Band

Lintel Band Ground Floor

First Floor

Roof Beam Ground Floor

First Floor

Terrace Floor

Grade Beam Ground Floor

First Floor

Chajja & Shelves Ground Floor

First Floor

Terrace floor

stair case & Step Ground Floor

First Floor

Roof Slab Ground Floor

First Floor

Terrace Floor

RCC ShelvesGround Floor

First Floor

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including all cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of the Engineer-in-charge.

First Floor

Terrace floor

Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.

Fly Ash brick masonry in cement mortar (1:6) in Super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.

First Floor

Terrace Floor

Fly Ash brick masonry in cement mortar (1:4) in Super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.

First Floor

Providing 12mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.

First Floor

Terrace Floor

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P and scaffolding required for the work etc. complete in all respect as per direction of the Engineer-in-charge .

First Floor

Terrace Floor

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P and scaffolding required for the work etc. complete in all respect as per direction of the Engineer-in-charge .

First Floor

Terrace Floor

Providing 20 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.

Supplying, fitting & fixing of Vitrified Tiles in Dado colour printed series tiles of thickness 8mm to 10mm in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3 ) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour , labour cess, T&P etc. required for the work all complete as per the direction of the Engineer-in-charge

First Floor

Supplying, fitting & fixing of Vitrified Tiles in Dado colour printed series tiles of thickness 8mm to 10mm in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3 ) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour , labour cess, T&P etc. required for the work all complete as per the direction of the Engineer-in-charge

First Floor

Supplying, fitting & fixing of Industrial Vitrified colour printed series tiles of thickness 8mm to 10mm in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4 ) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess, T&P etc. required for the work all complete as per direction of the Engineer-in-charge

First Floor

Supplying, fitting & fixing of Granite Tiles of minimum 20mm thick and size above 0.40 sqm of approved make in floors over 20mm thick bed of cement mortar 1:4 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect and as per direction of the Engineer-in-charge

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including sand papering, cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

First Floor

Terrace Floor

Painting two coats with approved quality of Plastic Paint over the interior surface of the walls with one coat of wall Primer including all labour charges cost, conveyance & taxes of all materials,labour,T&P required for the work etc. cmplete in all respect as per specification and direction ofthe Engineer-in-Charge.

First Floor

Terrace Floor

Priming one coat with any approved primmer including cost of primmer & labour to give an even shade with cost,conveyance & taxes of all materials & labour with T&P required for the work etc. complete in all respect as per specification & direction of the Engineer-in-charge.

Painting two coats with any approved colour of weather seal coat to out side surface of wall with one coat of Primer of approved shade and quality etc including sand papering, polishing the surface, all cost, conveyances of all materials and cost of all labour, labour cess with T&P etc, complete as per specification & direction of the Engineer-in-charge.

First Floor

Terrace Floor

Supplying of MS Grills/shutter of approved quality and design to windows and openings and staircase railing and parapet railings etc including making holes in walls and RCC structures or wood work etc in proper position making good the damages of walls or RCC or other structures complete including bending or cutting sizes or grooves in chowkhats with all cost and conveyance of all materials labour , labour cess with T&P required for the work and royalities etc.complete (including screws) in all respect in all floors as per the direction of Engineer-in-Charge .

First Floor

Terrace Floor

Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with all cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.

First Floor

Dressed seasoned sal wood (50mm. to 150mm. & upto 2.75m. long.) work framed and fixed (wrought and put up) in trusses, purlins, frames of doors, windows, ventilators and beamscost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge

First Floor

32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. But excluding the cost of iron fittings required for the complete in all respect as per direction of the Engineer-in-charge.

First Floor

Providing, Fitting & Fixing Factory made FRP (alternately called GRP) doorframe of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gel coat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in charge

First Floor

Providing, Fitting & Fixing Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnated with orthopthalic polyester including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in charge

First Floor

Providing and fixing of Partly fixed partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per IS 513 of 0 6 mm thick D quality, galvanized as per IS 277 with zinc of 120 Gm/Sq mtr) with paint pecification being with primer of 5 7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12 16 microns alongwith the alkyd backer at the back of 5 7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm. Top hung shutter including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in charge

First Floor

Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per IS 513 of 0 6 mm thick D quality galvanized as per IS 277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5 7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12 16 microns alongwith the alkyd backer at the back of 5 7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings including cost of all door fittings and fixtures etc Complete as per direction of Engineer in charge.

First Floor

Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in charge

Supplying, Fitting &Fixing of UPVC Openable Door of approved make with 6mm thick glass of approved quality complete with frame, shutters including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in charge

First Floor

Supllying,fitting,fixing 6 mm thick black glass panes in al frame Doors including cost of material,labour etc complete.

First Floor

Painting two coats of enamel over a coat of priming paint to new M.S. iron work including cost primer,sand papering,polishing the surface with cost,conveyance & taxes of all materials & labour with T&P required for the work etc. complete in all respect as per specification & direction of the Engineer-in-charge.

First Floor

Terrace Floor

Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.

Supplying & Filling foundation trenches , plinth & ditches with Excavated Earth well watered and rammed with all lead and lift including cost, conveyance, loading, unloading, stacking, royalties and all cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.

EI WORKS Recessed extra lead sub main wiring in 2 X 1.5sq.mm + 1 X 1.5sq.mm PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)

Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)

2 X 4 sq.mm +1 X 1.5 sq.mm -do-

2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia

4 X 10 sq.mm + 2 X 4 sq.mm -do-

Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required as per the direction of Engineer-in-charge.

Extra copper flat 25 X 5mm

Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make-HPL/ Havells/ Legrand / L&T/ C&S)

Supply and fixing of 0.5Amp to 32A rating 240 V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand / L&T/ C&S)

32Amp rating (DP) MCB

Supply and Fixing of following rating double pole 240 V isolator and MCB of "C" series in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.

Supply and Fixing of following rating 4 pole 415 V Isolator and MCB of "C"in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.

200Amp kit kat Extension Type

Supply and Fixing of extra down rod 20mm dia for 20cm x 5

Cutting and threading of down rod

Supply, Installation, Testing and Commissioning of INDOOR/ OUT DOOR pannel board with danger board. 16/ 18 SWG pannel box 60 X 36X 6= sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted with powder coated.

Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36 X 24 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.

S/F of copper bus bar 50 x 8mm with required size of insulating material and nut and bolts.

S/F of transparent glass for isolation L X B =sq.inch

Floor rubber mat 6'x4' x 6mm

Base channel 50 X 50 X 8mm

Supply and fixing of Indicator lamp with toggler switch and fuse

Supply and fixing of Indicator lamp with toggler switch and fuse

Supply and fixing of C.T coil upto 400Amp including all connections

Supply and fixing of following rating and breaking capacity 4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)

Supply and fixing of following G.I Wire as earth continuity S/F of PVC pipe for Net wiring (20mm size)

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-L&T/ Anchor/ Havells/ V-Guard/ Great White/ HPL)

Group-B L.P- F.P- C.B.P-

Group-C L.P- F.P- C.B.P-

Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type)(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp switch and socket of Modular type including all connection. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

Supply and fixing of Electronics step type Modular fan regulator. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connections. (Modular type) (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

S/F of Multipurpose board consisting 4nos. 6Amp plug and switch Modular on metal box and Modular cover with all connections. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

Supply and fixing of Modular switch ,Socket , T.V Socket and Telephone socket etc. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

T.V Antenna socket (Modular type )

Modular blank plate

Modular Neon Indicator

32Amp Modular DP switch

Rj-45 Net socket (Cat-6)

S/F of multipurpose board Modular 6A 3nos. Switch and 3nos. Socket and 1no. Switch and socket 15A on Modular board and cover. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)

ELECTRICAL LIGHT AND FAN FIXTURES 1 X 28watt T-5 fitting. (Make-Havells/ Bajaj/ Philips/ Crompton)

Supply and Fixing of 5 watt LED spot light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton)

Supply and Fixing of 21 watt surface LED cicular light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton)

Supply and Fixing of 15 watt surface LED square (1'x1') light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton)

Supply and Fixing of 34 watt surface LED square (2'x2') light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton)

Supply and Fixing of 34 watt surface LED rectangular (4'x1') light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton)

Supply and fixing 10 watt LED BH fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton )

Supply and fixing of Mirrior light with all connections. (Make- Havells/ Crompton/ Bajaj)

Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of WIPRO LP02-501-XXX-57-XX or equvalant reputed make ISI marked as approved make with specification LED Luminarie 25 Watt with BRAKET MOVEABLE TYPE maintenance free for inspection as required as per direction of Engg.-in-Charge. SIDE BOUNDRY WALL LIGHT

Exhaust fan 10"/12" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton)

Wall mounted fan 16" size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Polycab)

Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, on 6" X 4" conforming to IS-2268/ 1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (Make-Cona/ Anchor)

CCTV SURVELIANCE SYSTEM WITH WIRRING 1.3 Mp AHD IR Bullet/Dome Camera as per direction of Engg.-in-Charge.

16ch AHD DVR as per direction of Engg.-in-Charge.

32" LED Monitor as per direction of Engg.-in-Charge.

12V 20 Amps Power Supply as per direction of Engg.-in-Charge.

15U Val Rack as per direction of Engg.-in-Charge.

RG6 + 2 Core Power Cabling as per direction of Engg.-in-Charge.

4 TB Hard Disk as per direction of Engg.-in-Charge.

Installation,testing charges as per direction of Engg.-in-Charge.

Supply, Installation,testing and commissioning of Addressable Single action Manual pull station having an integrally mounted addressabla module that monitors and reports contact status.Make-Make-GST/Morley IAS/Bosch/Siemens

Supply, Installation,testing and commissioning of Addressable Horn / Strobe wall mounted type rated at 82 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication.Make-GST/Morley IAS/Bosch/Siemens

Supply, Installation,testing and commissioning of Analogue Addressable Fault isolator module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected,

Supply, Installation, testing and commissioning of 2 runs of 1.5 sq. mm, PVC insulated copper wires confirming to IS standards and specifications.(For Alarm and water flow Detector)

Supply, laying, testing and commissioning of Response Indicator for Above Ceiling Detector-

FIRE EXTINGUISHER Supply Installation and commissioning Portable Fire extinguishers of following type and capacity.

Providing and fixing of 4 Kg Capacity Clean Agent fire extinguisher.

AC & GEYSER 1.5ton S/T Invertor A.C. Machine ***

S/F of Automatic Voltage Stabilizer(0-90V) Make Shakti/V-Guard/Alpha

S/F of Safe Guard For outdoor Unit

S/F of Nylon PVC Pipe For Drainage of Water

Ac installation charges

12 L geyser

Geyser installation charges

External Lighting Supply and fixing 200 watt LED Flood light fitting. (Make- Havells/ Phillips)

Supply and fixing 48 watt LED street light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton)

Supply and Laying of following PVC armored Alluminium cables ISI marked on wall surface.(Make- Glowstar/ Polycab/ Nicco/ KEI/ HPL/ Mescab)

Inverters Supply and fixing. of Inverter, UPS 3.7KVA 48Volt (Make- Microtech/Su-kam/Luminous)

Supply and fixing of Inverter Battery 12V 150AH (Make- Exide / Amaron / Su-kam / Luminous) with 48 Month warranty).

Supply and fixing of Inverter Stand (Make Microtech/Su-kam/Luminous)

Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required.

EPABX SYSTEM Matrix PBX ETERNITY GE12SAC with installation

Matrix ETERNITY PE CARD CO2+DKP2+SLT16

Matrix Digital Key Phone with installation

50 Pair MDF Box with Chrone module with installation

2 pair telephone cable laying and casing in 1"inch with pvc

50 pair telephone cable laying and casing in 1"inch with pvc

I/O RJ45 with modular box and facelift installation and testing

MV Inspection Charges

PH WORKS Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

25mm dia CPVC pipe

40mm dia PVC ASTM pipe

In first floor 20mm dia CPVC pipe

25mm dia CPVC pipe

32mm dia PVC ASTM pipe

40mm dia PVC ASTM pipe

In second floor 25mm dia PVC ASTM pipe

32mm dia PVC ASTM pipe

40mm dia PVC ASTM pipe

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.

In first floor 250mm thick wall

Supplying all materials, labour, T&P and cutting hole in R.C.C chajja, for taking H.C.I/SWR pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.

In first floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.

In first floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge

15mm dia CP angle stop cock(Jaquar)CON-CHR-053KN

20mm dia CP concealed stop cock(Jaquar)CON-CHR-069KN

15 mm dia CP two way Bib cock(Jaquar)CON-CHR-041KN

15mm CP Health Faucet(Jaquar)ALD-CHR-573

15mm dia CP flange

15mm dia CP extension piece

125mm dia CP grating

25mm dia brass or gun metal fullway valve(Shakti Make)

40mm dia brass or gun metal fullway valve(Shakti Make)

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge

Supplying all materials labour TandP and fitting and fixing U PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non heat application method/as per manufacturers specification testing earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge

110mm U PVC door Tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC offset without ear

110mm dia U-PVC plain shoe bend

110mm dia 'p' trap

110mm dia U-PVC cowl

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge

Supplying all materials labour TandP and fixing the following vitreous china Wash Down Water Closet European type WC pan with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge

Supplying all materials labour TandP and fixing the following vitreous china Wash Down Water Closet European type WC pan with integral Por S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge

Supplying all materials labour Tand P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white fixing 50mm/40mm dia CP brass waste fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

Supplying all materials labour TandP and fixing wash basins with hole for pillar taps conforming to IS 2556 part 4 2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs screws and cement etc fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws shanks and back nuts of 15mm dia nominal bore Plaza make fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin fixing 32mm dia CP brass waste etc all complete as per specification and direction of the Engineer in charge

Wash hand basin with porcelain pedestal Parryware/Hindware

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

CP towel ring rail

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etcall complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing Granite slab urinal partition wall including cutting grooves in wall and making good the damages, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

In first floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

In first floor

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Ceramic tile 30cmx30cm Kajaria/Somany/Orient Bell/Johnson super premium to be pre-approved by the Engineer in charge)

In first floor

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Glazed tile 45cmx30cm Kajaria/Somany/Johnson/Orient Bell premium to be pre-approved by the Engineer in charge)

In first floor

Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

Sinking of tube well(200/150) Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only

Drilling of 150mm dia bore 30 mtr to 100mtr

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.

30 mtr to 45mtr

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)

C.C(1:2:4)with 12mm thips for grouting upto 5mtr.depth in sanitary lealing.

Fixing of 1 HP submerssible pump set Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge

DOL Control panel

2.50sqmm flat cable

20mm dia rigid UPVC pipes

Steel rope with cover

Well cap

50mm size CI bracket

32mm dia steel short piece

Labour charges for lowering including transportation

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

---- do --- addl depth of 0.30m upto 4.50m depth

R.C.P.C Cover(18" round man hole cover)

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge

Supplying all materials labour Tand P and laying in trenches to level or slope unplasticized PVC pipes conforming to IS 4985/2000 of the following outside dia for class 3 (0 60mpa) including jointing with supply of approved solvent cement by non heat application method/as per manufacturers specification providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C 1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.

160mm dia u pvc pipe alround concrete

Construction of 30 users RCC septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

RCC beam,Column, girders and bressmer etc

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fitting and fixing H.C.I soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge

100mm dia HCI heel rest bend

100mm dia HCI cowl

Supplying all materials, labour, T&P and providing cement joints to H.C.I spigot and socket, soil waste ventilating pipes and fittings with spurn yarn soaked in cement slurry or bitumen and cement mortar (1:1) as per specification and direction of the Engineer in charge

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Please Enable Macros to View BoQ information