Replacement of Bare LT Conductor by LT AB Cable along with insertion of ST pole wherever required within the jurisdiction of KPDCL, ED IV Khanyar Srinagar LT AB cable shall be provided by the Department Under Capex 2022 23

particulars

SITC of ST Pole 8 Mtr Long (ST-410 SP15) with galvanized channel earthing arrangement as per drawing no. CE / P&P / Dwg / 2022-STP-E001including loading, carriage and unloading upto site

Supply and Fixing of Suspension / Tension Clamp (Anchor clamp / dead end clamp) with eye hook suitable for LT ABC of 70 sq.mm Bare neutral messenger

Supply and Fixing of GI Pole Support Clamp for 11 Mtr Pole with size - 50x8x376 mm 9 mtr pole with size - 50x8x376 mm 8 mtr with size 50x 8x 332 mm 8 mtr or 9 mtr PCC with size 50x8x441mm

Supply and Fixing of GI Nut and Bolts with washers

Supply and Fixing of Cable tie

Supply and Fixing of Cable end Caps

Supply, Laying, Testing and Commissioning of 4 core 35 mm2 PVC Cable from AB Cable taping point through Piericing connector to PMDB including P/F of Thimbles/Clamps

Supply and fixing of Piercing Connector for connections (main line 120 Sqm/branch line section 4-25 Sqm) insulated and insulated branching and bare and insulated branching in case of neutral messenger

Supply and fixing of Piercing Connector for DB connection from main ABC to DB (main line 120 Sqm/branch line section 35-50 Sqm) insulated and insulated branching and bare and insulated branching in case of neutral messenger

Supply and Fixing of Piercing connector for ABC to ABC Tee connection (main line 120 Sqm/branch line section120 Sqm) insulated and insulated branching and bare and insulated branching in case of neutral messenger

Supply installation, testing and commissioning of 3 Phase SMDB (Service Main Distribution Box) IP54 made from 20 SWG CRCA MS sheetby Deep drawn method with connection terminals for R,Y, B & N as per specifications. Internal size of the box shall be 225mm x 285mm x 120mm used for connection through ABC line and for giving connections to the consumers 3phase-1 incoming 4 outgoing I/C- 1, O/G-2-4 (200 A, 0.415 kV) for RYB Phase. The DB should have Bottom entry of Cable with proper Glands/grommets-Safety Screws and Back Clamp suitable for 11/9/8 Mtr ST Pole or 9/8 mtr PCC poles with Nuts/bolts. The job also includes disconnection/reconnection of consumer energy meter and aluminium lugs, if required.

Supply, installation ,testing and commissioning of Pole Earthing Complete by GI Pipe 40 mm 3mtr long through GI Strip 25x3 mm

Supply, installation , testing and commissioning of Pre insulated straight through joints suitable for 1 (3X120+1x16 (street light) +1X70 (insulated messenger) Cable

Providing and Fixing of Insulation tape (red / yellow / black)

Providing and Fixing of Misc Items such binding wire, screws, Thimbles of sizes, Clamps of sizes etc.

Providing and Painting of ST Poles 8 mtr long with 1 coat od red oxide and 2 coats of aluminium paint

Providing and Cement Bottoming 1:2:4 mix as per REC standards 0.45cum/pole

Supply, Installation, Testing and Commissioning of LT Distribution Box for 250 kVA DTR with MCCB for Outgoing Circuits, Distribution Boxes made out of CRCA MS for controlling the L.T. feeders from the L.T. side of Distribution Transformers IS: 8623 (amended upto date) for enclosure Box & for degree of protection provided by enclosures of electrical equipments. The Aluminum Busbar for Phase & Neutral should be of size 25x8 mm and with Heat Shrinkable bus bar insulation tubing of Red Yellow-Blue & Black mounted on epoxy resin cast bus insulators fixed on suitable fixing arrangement with adequate clearance. The DB should have Bottom entry of Cable with proper Glands/grommets-Safety Screws Outgoing 02 no. MCCB - 200 A O/G Link Disconnector 06 no. - 200 A and Outgoing 02 no. MCCB - 200 A O/G Link Disconnector 06 no. - 200 A

Supply, Installation, Testing and Commissioning of LT Distribution Box for 100 kVA DTR with MCCB for Outgoing Circuits, Distribution Boxes made out of CRCA MS for controlling the L.T. feeders from the L.T. side of Distribution Transformers IS: 8623 (amended upto date) for enclosure Box & for degree of protection provided by enclosures of electrical equipments. The Aluminum Busbar for Phase & Neutral should be of size 25x8 mm and with Heat Shrinkable bus bar insulation tubing of Red Yellow-Blue & Black mounted on epoxy resin cast bus insulators fixed on suitable fixing arrangement with adequate clearance. The DB should have Bottom entry of Cable with proper Glands/grommets-Safety Screws Outgoing 02 no. MCCB - 200 A O/G Link Disconnector 06 no. - 200 A and Outgoing 02 no. MCCB - 200 A O/G Link Disconnector 06 no. - 200 A

Supply, Fabrication and Fixing of GI Channel / Angle / Flat of sizes including clamps, GI Nut and Bolts with washers

Supply, Laying, Testing and Commissioning of 16 mm² Cable (2C) from LT DB box to meter ,1.1k V Grade, Armoured, PVC Insulated Stranded Conductor FRLS type including thimbles/Clamps/Lugs.

Supply, Laying, Testing and Commissioning of 185 sqmm XLPE LT single Core unarmoured Cable from transformer to LT BD (alongwith Required Aluminium Thimbles P/F included)

Supply, Laying, Testing and Commissioning of 240 sqmm XLPE LT single Core unarmoured Cable from transformer to LT BD (alongwith Required Aluminium Thimbles P/F included)

Installation, testing and commissioning of 120 mm² AB Cable (3X120+1x16 (street light) +1X70 (messenger)) XLPE (1.1kV, 3+1 C, Al) including loading from Divisional Stores atKhanyar , its carriage and unloading upto site (Cable to be Provided by the Department)

Dismantling of existing ACSR Conductor and LT Shackle Insulators along with U Clamps including Transportation its carriage / Loading / unloading from site to Divisional Stores.

Escon Electricals

DAR BROTHERS ELECTRONICS

M.I ENTERPRISES