PROVN OF TOILET IN SNCOS LIVING IN ACCN AND NEAR MAIN GUARD ROOM AND PARKING SHED NEAR OPS COMPLEX AT 41 WEU A KHASA UNDER AGE I AF AMRITSAR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Hard / Dense soil complete all as specified and as directed.

Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed .

Removing excavated materials to a distance not exc 50m and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point.

M&L for Cement concrete Type D2 (1:4:8) 40mm graded aggregate in foundations, filling and mass concrete .

M&L Brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius half thick walls built in CM 1:4 complete all as specified and directed

M&L for Rendering 10 mm thick CM 1:3 on fair faces of brick work or concrete surfaces for ceiling, Finished even and smooth ( without using extra lime or cement) complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L 15 mm thick cement plaster in cm 1:4 mixed with liquid water proofing compound @ of 3% as on other than fair face of brick or concrete surface finished surface even and fair all as specified and directed. Note : Supply only water proofing liquid shall be measured and paid separately.

Preparing newly plastered surfaces of walls and applying two coats or oil Bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.

Material and labour for applying two coats of Acrylic weather coat emulsion paint on walls/ceiling/facias/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match including M&L for CM 1:6 Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes

M & L for Glazed ceramic white tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchand 10 mm thick screed bed or bedding layer for verticle surfacein CM 1:3 complete all as specified and directed

M&L Nominal mix type B-1 1:2:4 using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

M & L Fair finished flat form works to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

S&F Shower rose 125 dia brass chromium plated size with swivel type joint including fixing to steel pipes or union fixing repair complete all as per specified and directed

S&F 15mm diaBib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as per specified and directed by E-in-charge

S&F 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and directed by E-in-charge

S&F in repair Concealed stop cock 15mm bore dia,cast copper alloy, chromium plated screwed down high pressure,with crutch or buterfly handle,screwed both ends for pipes or for unions incl repair to surface to match the existing surface complete all as specified and as directed.

Supply and fixing Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) including required fittings complete all as per specified

Supply and fixing 75 mm dia PVC (SWR ) floor trap/ nahani trap,with grating plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC 75mm dia (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F PVC (SWR) bend any radius for 75 mm bore pipe incl jointing material complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

Supply and Fix 15mm bore water tubing medium grade galavanised with all fittings and is fixed complete to walls and ceiling or laid in floors.

Supply and Fix 20mm bore water tubing medium grade galavanised with all fittings and is fixed complete to walls and ceiling or laid in floors.

S & F Grating doom 100mm dia with wast hole of PTMT (Min weight 25 gms).

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

Supply and fixing in repair 110 mm dia PVC (SWR ) floor trap/ nahani trap,with grating plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repair, 10 Litre capacity PVC valveless, syphonic action type,flushing cistern low level ,white, with inlet,ball valve, float ,flush pipe and handle including brackets, 32mm bore PVC flush pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded polythene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank complete all as specified and directed.

S&F in repair 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repair 15 mm bore Gun metal, globe or gate valve,with iron wheel head, screwed both ends for iron pipes complete as specified and directed

S & F Vitreous china wash basin white flat back 550 x 400 mm , with fitting of PTMT waste coupling suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc fixed in repairs complete all as specified and directed.

S& F15 mm dia pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or clod with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed

S&F vitreous china wash down water closet pan pedestal pattern white including fixing bolts and seat cover white for pedestal pan with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe).

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl urinal spreader fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

M&L for Urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed

S&F 32 mm dia PVC flexible pipe of suitable length for wash hand basin or urinal complete all as specified and directed.

S & F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

Preparing newly plastered surfaces of celing and applying two whitwash including prepration of surface complete all as specified and direceted.

M&L for PCC 1:3:6 Type C-1 Cement concrete in foundations, filling and mass concrete complete all as specified and directed

M&L for providing, cement concrete in plinth protection 1:2:4 (Type B1) in plinth protection etc

Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface all as specified and directed by EIC.

M&L for providing of cement concrete 1:2:4 Type B-1 in fixing of holdfasts as required complete all as specified and directed by EIC.

M&L and fabrication of mild steel work as in posts,purlins,crane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc Fe-290 (Gde E165) complete all as specified and directed .

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces complete all as specified and directed by EIC.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.complete all as specified and directed by EIC.

M&L for cement concrete type E-2 , 1:5:10 (using 40 mm graded aggregate) as in sub base.complete all as specified and directed by EIC.

M&L for 100 mm thick Cement concrete type B-1 , 1:2:4 (using 40 mm graded aggregate) as in Finishing cement concrete surface even and smooth without using extra cement.complete all as specified and directed by EIC.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm sealed with sealing compoud.(Thickness of concrete slab 100 mm)complete all as specified and directed by EIC.

Material and labour in repair for Point wiring for One light point, controlled by one switch 5 Amp one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly including MS sunken box covered with 3mm thick bakelite laminated sheet top cover and machine made brass screw and washers etc complete all as specified and directed:-

(a) For one light/fan/bell point controlled by one 6 Amp one way switch.

S & F of in repair switch piano flush type single pole one-way 6 Ampere complete all as specified and directed.

S & F in repair of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.

S&F in repair of lamp holder PVC / polycorbonate type insulated body with bakelite suitable for batten fitting / angle fitting complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20Watt, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeas per specified and directed.

Supply and fix single phase propeller type ventilating (Exhaust fan ) AC 230 volts 300 mm sweep, steel body Heavy duty motor, complete with lourvers and shutters complete all as per specified and directed. Make : Havells, Crompton Greaves, Bajaj.

S & F in repair sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

S & F in repair MCB DP, 240 Volts, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

S & F in repair MCB single pole, 240 Volts, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm. The desired value of earth resistance should be less than 3 Ohm, if not found below 3 Ohm the complete earthing will be redone without extra cost of the govt. Complete all as specified and directed by Engr-in-Charge.

Supply , laying jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric powder cable (heavy duty) with alumininum conductor cross sectional are 6 Sqmm 2 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, including taking out old cable with protection bricks and removal, complete all as specified and directed Note:- Excavation and earth work , sand cushioning, brick protection and GI pipes for protection shall be measured and paid for separtely.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep for laying of cables and foundation of poles etc. and getting out complete all as spceified and directed.

Returning, filling in trenches (soil) including spreading leveling and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of surplus excavation soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

M/s AKG Engineers & Contractors

kapoor and co

M/s Vijay Construction Co.

MAAN ENTERPRISES