Providing and erecting new electrical poles and Electricals transformers wiring and related work in Amalner city for year 2024-25.

Amount

Providing and erecting new electrical poles and Electricals transformers wiring and related work in Amalner city for year 2024-25

Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ

Supplying and erecting rolled steel joist (girder) pole 152 x 152 mm (37.1kg/m) with base plate in provided foundation as per specification no. OHPL/RSJ

Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority

A)Supplying & errecting M.S. channel 100 x 50 x 6 mm

B)Supplying & errecting 75 x 40 x 6 mm M.S. flat with nut bolts

Supplying and erecting all aluminium stranded conductors 7/3.10 mm. complete. (Ant.) (145.0 kg/km) as per speci

Supplying and erecting all aluminium stranded conductors 7/2.21 mm.complete. (Gnat) (73.77kg/km) as per speci .

Supplying and erecting porcelain shackle type LT medium insulator 50 x 89 mm dia. with G.l. strips, nuts and bolts, complete. 8-6-3.

Supplying and erecting porcelain shackle type LT medium insulator 75x115 mm dia. with G.I. (Shackle) strips , nuts and bolts, complete.

Supplying and erecting aluminium bobbin with G.l. strip, nuts complete. 8-6-4.

Supplying and erecting G.l. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. 8-7-1.

Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.).

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specifi.

Providing cement concrete foundation including excavation for the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.

Supplying and erecting pole clamp made from 50 x 10 mm MS flat for pole or pipe, post complete erected with 15 mm bolts and nuts, complete duly painted with one coat of red oxide and two coats of aluminium paint.

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminum conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI

Providing & erecting floor/wall mounted MCCB panel board, with door, suitable for four pole incoming 250A, 2 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs)

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

Supplying, installing, testing and commissioning 11kV HRC Fuse 10A to 40A for load break switch with necessary nut bolts complete.

Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes.

Dismantling the existing lightning arrestor set, insulator from DP structure complete.

Dismantling the existing V cross Arm Top fitting and channel and guarding complete.

Supplying and erecting rolled steel joist (girder) pole 175 x 75/ 85 mm (19.6 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ

Supplying, erecting & terminating XLPE insulated 1100 V 3 Core 25 sqmm + 1 Core 25 Sqmm Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OHCBL/ ABC

RAMPUSHPA ELECTRICALS

Shri Atharva Rathi Electricals