Byfurcation of 11kv feeder no-05 of 33/11KV S/S Delhi Road of EDD-I Hapur

Amount

FOR BYFURCATION OF 11KV FEEDER NO.-05 OF 33/11KV SUB-STATION, DELHI ROAD HAPUR, IN BUSINESS PLAN, IN THE JURISDICTION OF EDD-I, HAPUR, UNDER EDC., HAPUR.

Carriage of line material (Like-Cross Arm, All type Clamps, Nuts & Bolts, ACSR Conductor etc.), from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of ST Pole 11mtrs long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of 11KV 3x185Sqmm XLPE Cable, from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of 11KV 3x185Sqmm XLPE Cable Jointing Kits, from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of outgoing VCB, from Electricity store center, Hapur to site of work with loading and unloading by Crane/Mannual labour at both ends on Kachha Packka road.

Erection & Fixing of ST Pole 11 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Fabrication, erection and fixing of double pole on ST Pole 11 mtr. long with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing top and dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Laying of 11KV XLPE 3x185Sqmm Cable according to sanctioned estimate as per RESPO/Norms

Laying of 11KV XLPE Cable undergound (Double) into PVC Pipe (HDPE) through machine including cost of HDPE and labour etc. spare cable shall be left in the loop shape at both ends as per RESPO/Norms.

Making of 11KV XLPE 185Sqmm Indoor/Outdoor joining Kit , after duly plumbing and taping of cable, providing fixing and crimping of proper size good quality lugs, including cost of lugs, and tapes etc.

Providing & Fixing of G.I. pipe 6"dia Class-B over 11KV 3X120Sq.mm XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends.

Installation of outgoing VCB (300/100/S5A) and completion of related works, as per RESPO/Drawing Norms.

Laying , Stringing and final sagging of ACSR Dog conductor after binding from Insulator as per RESPO/Drawing Norms.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.

Grouting of following supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms.

Jumpering work properly as per RESPO/Norms.

Vivek Electricals

M/s Pankaj Kumar

Ashish Electricals

MUSKAN INTERPRISES

Maverick Power Solutions Pvt. Ltd