SPECIAL REPAIR TO BLDG NO E-44 SHOPPING COMPLEX AT NAMKUM POCKET OF RANCHI MIL STN UNDER GE RANCHI

Amount

Taking cown chcwkats of frames with shuttles (without taking of shutters from the frames) not exceeding 1.50 Sqm each

All as per item No 1 above but exceeding 1.50Sqm and not exceeding 4.00 Sqm each

M&L Anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc.including (powder coating 50 Micron) complete all as specified and directed

M&L Anodised aluminium door shutters, aluminium section weighing not less than 0.30 kg/ m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including (powder coating not less than 50 micron) complete all as specified and directed

S&F 4mm thick plain sheet glass, area exc. 0.5 sqm in each pane and fixed to aluminium frame work etc complete all specified and directed.

S&F 4 lever brass mortice lock vertical type size 65mm long, complete all specified and directed.

Taking down aluminium doors shutters only (area exc. 1.0 sqm but not exc 2.0 sqm each) & dismantling all members and resembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing positions with & incl new screws including refixing the door shutters in the same opening complete all as specified & directed.

M&L 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminium frame.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F steel windows with side hung shutter including projecting type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars, dovetailed or welded.

All as per item no 10 above but without glazing bars.

Supply & fix Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty of make Shalimar Hardware or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane.

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.

S&F aluminium anodised tower bolts of 150 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all specified and directed.

Dismantling Wall and ceiling boards of any description and any thickness including cover fillets.

M&L providing aluminum snap Grid frame work for false ceiling with of size 595x595 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues.

M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws .

Demolition of brick work built in cement morter including all quoins, arches, pillars etc, complete all specified and directed.

Material & labour brick work with Fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description.

Material & labour 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed

M&L cement concrete type B-1 (1:2:4) using 20mm graded broken stone agg as coping, benching, cills, lintels up to 1.50 mtr clear span, filling around hold fast , fitting in chowkats etc complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair complete all as specified

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified.

Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with two coats of cement base paint of, any colour, complete all as specified & directed.

Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as directed

Material & labour for preparation of Old painted surface of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams Clean span above 4 metres and upto 8 metres.

Dismantling timber scantlings 40 sqcm and over in section, in any position.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 FE-410(Gde E-250, quality A).

Supply & fix in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Hacking out old broken glass (any thickness), size quality or description from metal frames incl punching or drilling out glazing pins/springs clips and providing and fixing new ones glazed with putty or fixed with beads complete all as specified and directed .

Material & labour for 20 to 25mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slabs including grinding and mirror polishing complete all as specified and directed.

Material & labour for 20 to 25 mm thick machine cut kota stone slab on vertical surfaces over and including 10 mm thick backing plaster in cement mortar (1:4) complete all as specified and directed.

M&L for mild steel framed work as in chhaja/ sun shade at any height incl all necessary welding and fixed to wall complete.

Supply & fix mild steel work as in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete

Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M & L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L RCC 1:11/2:3 Type A-1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

M & L RCC 1:11/2:3 Type A1 using 20 mm graded stone aggregate as in Columns, pillars etc

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 59 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire

All as per item No 59 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire

All as per item No 59 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way (Make : Anchor/Havells/Legrand( ISI marked)

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) , (Make : Anchor/Havells/ABB( ISI marked)

S&F Socket 15 Amps flush type 230 Volts , AC complete.(Make : Anchor/Havells/Legrand( ISI marked)

S&F switch 15 Amps flush type 230 Volts , AC complete.(Make : Anchor/Havells/Legrand( ISI marked)

Supply & fixing 5 step fan regulator single pole, 240 Volts complete all as specified & directed. Make- Anchor/Havells/Legrand( ISI marked)

S&F ceiling rose, surface backlite, 65x50mm, three terminals, Make : Anchor ISI marked.(Make : Anchor/Havells/Legrand ( ISI marked)

Supply and fixing of LED Batten 20W With Body made of Extruded Aluminium Alloy housing and with Extruded Polycarbonate diffuser for optimum and Wide light distribution. Ingress Protection of Min IP 40 with Driver having inbuilt Protection against Short Circuit Miswiring, Over Voltage and Surge Protection of upto 6kV. THD < 5 %, CRI>80. PF>.95.System Efficacy of the Product should be >130lpw( Total System Lumens > 2600 lm). The Colour of the fixture should be in Grey finish. The Fixture and Driver should be of the same Brand only.Operating Voltage Between ( 140-270)V. The Avg Life of Product Should be 50,000 Burning Hours @L70. The Fixture and Driver should be BIS Approved. The Engineer in Charge can take any Random Sample from Lot and send it for testing from any Govt Approved NABL Lab . CA number, Contractor Phone number and Date of expiry of 2 yearrs warranty shoud be endorsed by indelibile ink on the lights' main body so as the user can see it after installation. Cost of the same have to be borne by the Contractor. In case the sample is rejected the Whole lot will be rejected by the Department. (Philips/Wipro/Havells)

Dismantling and taking down existing unserviceable submain wiring from batten/conduit of any size and making good to disturbed surfaces to match the existing surfaces.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty in concealed conduit including taking down old wiring all accessories complete all as specified and directed. Make- Havells/Finolex

Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces.

S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed by Engg-in - charge. Make- /Havells/Finolex/Anchor

Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing .

S&F MCB TPN 40 to 63 Amps 415V incl all termnials, fitting etc. Make:-Havells / Legrand / L&T .

S&F Distribution board 4 way TP&N Vertical Loadline Double Door are fitted with Bus Bars, Neutral Links, Blanking Plates, Suitable for FP MCCB.Make:-Havells / Legrand / L&T

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 06 ways.Make:-Havells / Legrand / L&T .

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc. Make:-Havells / Legrand / L&T .

S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc. Make:-Havells / Legrand / L&T .

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

M/S GYANITECH ENTERPRISES