Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC 47 C MODEL TOWN EXTENSION LUDHIANA PB | LUDHIANA | PUNJAB | 141001 | L1 | Accepted-AOC Due to lowest bid | |
| 2 | L2₹17.9 L+₹77,706.03 (4.53%)Rejected-Finance VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L2 | Rejected-Finance Due to higher bid | |
| 3 | L3₹18.9 L+₹1.7 L (10.00%)Rejected-Finance | L3 | Rejected-Finance Due to higher bid | |
| 4 | L4₹19.8 L+₹2.6 L (15.5%)Rejected-Finance | L4 | Rejected-Finance Due to higher bid |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
3 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) FEROZEPUR CANTT
GE (WEST) FEROZEPUR CANTT
CERTAIN BR REPAIR TO OFFRS MD ACCN AND OFFRS MESS UNDER AGE BRII OF GE (WEST) FEROZEPUR CANTT
2024_MES_644045_1
802024/GE-05/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
FEROZEPUR CANTT
₹50,000
Yes
25 Apr 2024
7 Mar 2024
10 Apr 2024
7 Mar 2024
3 Apr 2024
21 Mar 2024
Amount
Taking down cement plaster inlcuding racking out joints, hacking for keys, scrubing down with water, complete all as specified and directed.
M&L 15 mm thick cement plaster in cement mortar 1:6 on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in cement mortar 1:4 on any face of brick walls or conrete surfaces, surfaces finished even and fair complete all as specified and directred.
M&L rendering 5mm thick in cement mortar 1:3 on ceiling, soffits of chajja or similar location any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement,etc complete all as specified and directred.
M&L raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc with cement or cement and lime mortar complete all as specified and directed.
M&L rendering 10mm thick cement plaster in cement mortar 1:4 fair faces of brick work or concrete surfaces and finish the surface fair and even without using extra cement complete all as specified and directed.
M&L preparation of newly plastered ceiling surfaces and three coats white wash complete all as specified and directed.
M&L preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over a coat of 1mm thick wall care putty complete all as specified and directed.
M&L preparation of new wall surfaces and applying two coats of colour wash over one coat of white wash complete all as specified and directed.
M&L preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and applying one coat distemper oil emulsion on walls complete all as specified and directed.
All as per ser item No. 10 here-in-before but two coats of distemper oil emulsion.
All as per ser item No. 10 here-in-before but one coat of white wash on ceiling surface.
All as per ser item No. 10 here-in-before but one coat of white wash on wall surface.
All as per ser item No. 10 here-in-before but one coat of colour wash on wall surface.
All as per ser item No. 10 here-in-before but one coat of cement based paint on wall surface.
M&L preparation of old decorated wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over 3mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper achiving smooth surfaces complete all as specified and directed.
M&L applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in cement mortar 1:3 including mixing of polymer latex additives 60mm average thickness (Chajjas fins, borders etc) complete all as specified and directed. Notes: (i) Quantity of polymer to be used by 15 % by weight of cement. (ii) Use the electrical mixer to get homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hours as required. (iv) Keep the surfaces moist using water fog for 5 to 7 days etc. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 m.complete all as specified and directed. Make (Epoxy bonding agent): Krishna, Dr. Fixit, MC Bauchemie and M/s Chemistik.
Demolition of cement concrete of any description as in roof padding, coping, chajja etc. water tank bases on roof etc. unreinforced (other than ground floor) complete all as specified and directed. Note:- Debris/demolished material to be removed out of MD land or 500 m away from the work place in low lying area.
M&L 25 mm average thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof levelling course complete all as specified and directed.
M&L rendering 10mm thick in cement mortar 1:3 on concrete surfaces of roof padding with integral water proofing compound @ 3 % by weight of cement content finished even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound to be measured and paid for separately.
Supply only integral Liquid water proofing compound. Note: WPC to be mixed @200ml per 50 Kg bag of cement.
M&L cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polster non wove fabric (weight not less than 150 gms/sqm) laid over primed / tack coat of paving bitumen 85/25 on roof surfaced by forced applicaion complete including taking down/removal of existing treatment complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm dia bore complete all as specified and directed.
Taking up or down steel tubing and connection 20 mm dia bore complete all as specified and directed.
Fixing only, after cleaning old steel tubing, 15 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Note:- Servicable pipes obtained from item 26 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.
Fixing only, after cleaning old steel tubing, 20 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Note:- Servicable pipes obtained from item 27 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.
S&F 15 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan as in repair complete all as specified and directed.
S&F vitreous China squatting pan, 'Orissa patteren, size 580mm x 440mm white, with integral footrests (excluding flushing cisteren and flush pipe) as in repair complete all as specified and directed.
S&F vitreous China wash basin white, flat back, size 550mmX400mm including cutting for pinning in ends of brackets, as in repairs complete all as specified and directed.
S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size as in repairs complete all as specified and directed.
S&F 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions as in repair complete all as specified and directed.
S&F 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions as in repair complete all as specified and directed.
S&F PVC connection 15mm size PTMT nuts of length 450 mm as in repair complete all as specified and directed.
S&F 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule as in repair complete all as specified and directed.
S&F 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to with aerator as in repair complete all as specified and directed.
S&F fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator as in repair complete all as specified and directed.
S&F 15 mm bore fancy type health faucet with SS hose as in repair complete all as specified and directed.
S&F fancy type chromium plated Towel Rail 60 cm long as in repair complete all as specified and directed.
S&F chromium plated soap dish as in repair complete all as specified and directed.
S&F chromium plated toilet paper holder as in repair complete all as specified and directed.
S&F 15 mm bore 100 mm dia overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange as in repair complete all as specified and directed.
S&F 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts as in repair complete all as specified and directed.
S&F PVC cabinet mirror of size 450mmx600mm as in repair complete all as specified and directed.
S&F water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or Aluminium hinging devices as in repair complete all as specified and directed.
S&F stainless steel sinks made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers & waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm as in repair complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm each pane 3 mm thick complete all as specified and directed.
M&L 3 mm thick figured glass pin headed ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm each pane complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed.
M&L non skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
M&L non skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
All as per ser item No. 59 here-in-before but in skirting including rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 to receive wall tiles etc complete all as specified and directed.
M&L Virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
All as per ser item No. 59 here-in-before but in skirting including rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 to receive wall tiles etc complete all as specified and directed.
M&L glazed coloured and cereamic tiles in vertical surfaces 450mmX350mm and 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and directed.
M&L glazed coloured and cereamic tiles in vertical surfaces 300mmX200mm and 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and directed.
S&F 20 mm dia decorative type curtain rods chromium plated anodised Aluminium alloy as in repair complete all as specified and directed.
S&F fancy type powder coated Aluminium bracket for curatin rod suitable for 20 mm dia pipe as in repair complete all as specified and directed.
S&F 100mm butt hinges medium weight cold rolled stainless steel as in repair complete all as specified and directed.
S&F 75mm butt hinges medium weight cold rolled stainless steel as in repair complete all as specified and directed.
S&F Aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.
S&F Aluminium handle 150 mm cast type anodised complete all as specified and directed.
S&F 300mm long alluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.
Taking down shutters of any description not exceeding 1.00Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed.
Taking down chowkhats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and directed.
Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.
S&F pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
All as per ser item No. 76 here-in-before but size 125mmx60mm with double rebate.
S&F anodised Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in hold fast, bed plates, fillling of pressed steel chowkhats and all other similar works complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19mm x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15mm x 15mm mild steel square tube inside 19mm x 19mm MS square tube suitably screwed complete all as specified and directed.
S&F factory made 35 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F factory made 30mm thick glazed and skeleton shuttersof 2nd class hard wood with or without shash bar (hollock) open rebated and prepared to receive glass, gauze etc devided into square with plain chamfered or rounded and rebated sas bar (any no of bars)for securing glass, gauzed etc sizes of members of shutters as specified in SSR Part-1 sec-8 clause 8.20(a) complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15mm x 15mm for top and bottom rails and 19mm x 19mm for stiles, mild steel frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.
S&F 18mm to19mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup borad & kitchen cabinet shutters and all other similar works as in repair complete all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled stainless steel complete all as specified and directed.
S&F Aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed.
S&F Aluminium anodised 75 mm barrel tower bolts of extruded section complete all as specified and directed.
S&F Aluminium handle 100 mm cast type anodised complete all as specified and directed.
S&F 100mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
Resecuring or easing & adjusting, without taking down shutters of any description exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.
M&L preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered in writing complete all as specified and directed.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid for separately.
Supply only integral water proofing compound.
M&L applying one coat of cold applied polymeric modified bituminous primer @ 0.30 Kilogram per square metre including preparation of roof surfaces complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including bitumen primer complete all as specified and directed.
M&L APP membrane to be finished with one coat of solar reflactive bituminous based Aluminium Paint @ 0.1 kg per sqm complete all as specified and directed.
M&L brick tiles 40mm thick laid over a 25mm thick layer of mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement as the work proceeds complete all as specified and directed.
All as per ser item No. 99 here-in-before but except tiles.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
Demolition of stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.
M&L granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
S&F in repairs 16mm-18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.5 Sqm area fixed with and including one number SS clamps (grade - 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. complete all as specified and directed.
M&L crushed sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed.
M&L machine presssed precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed. Note :- Sand cushioning shall be measured and paid for separately.
M&L providing cement concrete 1:3:6 type B-1, (using 20 mm graded crushed stone aggregate) as in rounded or chamfered on edges of paver blocks / chequered tiles or sides of path / hardstanding, roof kerbing and mud stops etc. complete all as specified and as directed
Dismantling PVC water tanks capacity exceeding 250 litre and not exceeding 500 litre complete all as specified and directed.
Dismantling PVC water tanks capacity exceeding 500 litre and not exceeding 1000 litre complete all as specified and directed.
M&L 500 litre capacity rotational moulded triple layered polyethylene water storage tanks (cylinderical vertical wit closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
M&L 1000 ltrs capacity rotational moulded triple layered polyethylene water storage tanks (cylinderical vertical wit closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
Demolition and breaking up drain pipes upto 110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed.
M&L cutting holes in brick walls built in cement morter for taking out/ inserting of CI/PVC/AC pipes/ branch pieces of dia not exceeding 110 mm / hold fasts etc exceeding half brick but not exceeding full brick wall complete all as specified and directed.
S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including making good to the disturbed surfaces complete all as specified and directed.
S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes laid in trenches including making good to the excavated surfaces complete all as specified and directed.
S&F 75mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including making good to the disturbed surfaces complete all as specified and directed.
S&F 75mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes laid in trenches including making good to the excavated surfaces complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.
All as per ser item No. 120 here-in-before but with access doors.
S&F 110 mm dia PVC (SWR) bends complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends with access doors any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.
Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.
M&L anodised Aluminium snap grid frame work for false ceiling complete all as specified and directed.
M&L fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed. Note: Frame work for ceiling shall be measured and paid for separately.
S&F 5mm thick printed coloured PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, Insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site with Aluminium corner, top and bottom angles/ mouldings etc. complete all as specified and directed.
S&F door closer of Aluminium dia cast body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61Kg to 80 Kg and fixed in repair complete all as specified and directed.
S&F door bottom seal Aluminium plate with black rubber, 3 feet length in repair complete all as specified and directed.
Disconnecting existing tanks exceeding 250 litre and not exceeding 500 litre, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position. Powder shall deemed inclusive of quoted rate.
Disconnecting existing tanks exceeding 500 litre and not exceeding 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position. Powder shall deemed inclusive of quoted rate.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
S&F Grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed.
All as per ser item No. 133 here-in-before but with waste hole of PTMT. (Minimum weight 100gms)
S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Taking down carefully Copper/Aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above itemild steelshould be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
M&L point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing mild steelpressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.
(b) One socket outlet on the same board controlled by one single pole one way switch
(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.
All as per ser Item No. 138 here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.
All as per ser Item No. 138 here-in-before but existing conduit and existing mild steel pressed steel/ cast iron box complete all as speicifed and directed. (a) One light point/fan/bell point controlled by one single pole one way switch.
(b) One 5 Amps socket outlet independent controlled by one single pole 5 Amps switch.
All as per ser Item No. 141 here-in-before but existing conduit and existing mild steelpressed steel/ cast iron box complete all as speicifed and directed.
S&F switch piano flush type single pole one way /6 Amps complete all as specified and directed.
S&F switch piano flush type 15 Amps, single pole one way complete all as specified and directed.
S&F Socket outlet 2 in one, 5/6 Amps flush type complete all as specified and directed.
S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.
S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed.
S&F Lamp holder insulated body threaded dome pattern, suitable for bracket / batten fitting complete all as specified and directed.
S&F stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as required in repair complete all as specifed and directed.
S&F bell push flush type 5 Amps complete all as specified and directed.
S&F bell ding dong type AC 230 Volts single pole complete all as specified and directed.
S&F in replacement modular Bell push 6 Amps, 1 module complet+E24:E34e all as specified and directed.
S&F in replacement of existing modular socket 6 Amps/16 Amps - 2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement of existing modular switch one way 16 Amps, 1 module complete all as specified and directed.
S&F in replacement of existing modular socket 6 Amps - 2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement of existing modular socket 6 Amps/16 Amps - 2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 1 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 2 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 3 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 4 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 6 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 8 module complete all as specified and directed.
S&F in replacement of existing modular step type regulator, 120 Watt - 2 module complete all as specified and directed.
S&F LED lights fitting 1x 20 Watts, 220 Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Makes: Havells Cat Part No. LHEXBLP7PN1W020 or techno-commercially equivalent in approved makes.
S&F in repair LED tube light fitting 9 Watts batten type fixed on wall/ ceiling etc. including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Makes: - Cat Part No LHEXBLP7IN1W009 of Make - Havells or techno-commercially equivalent in approved makes
S&F LED luminaire 600 mm x 600 mm, 35/36 Watts, 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Makes: Crompton Cat Part No. LCTLRN-36-FO-CDL or techno-commercially equivalent in approved makes.
S&F LED street light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F in replacement of plastic exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 Volts, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Note: Unserviceable exhaust fan to be deposited to AGE E/M (W) yard by contractor.
S&F in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 Volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
All as per ser item No. 154 here-in-before but SPN DB's 4 way.
S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type) fitted with ABS frame and 415 Volt 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
S&F MCCB 63 Amps 415 Volts 16KA breaking capacity complete all as specified and directed.
S&F MCB TPN 415 Volts 63 Amps, 10 KA breaking capacity complete all as specified and directed.
S&F MCB, single pole and neutral 240 Volts, 32 Amps 10 KA 'B' series complete complete all as specified and directed.
S&F MCB, Single pole 240 Volts, 6 Amps - 32 Amps 10 KA 'B Series complete all as specified and directed.
M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC concealed with 1 x 6 Sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core and one run of PVC conduit shall be measured as single run.
M/s AH Construction Co.
M/s Surjit Singh and bros
M/s Sarup Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .