COMPREHENSIVE BR SERVICES FOR MAINTENANCE REPAIRS, AND UPKEEP OF BUILDINGS AT MADGAON SUPPLY DEPOT AND EM INSTALLATIONS INCLUDING WELCOME MAINTENANCE AND PERIODICAL SERVICES UNDER GE PANAJI

Amount

Taking down cement plaster on brick or stone walls or ceiling surfaces etc including raking out joints hacking for key scrubbing down with water and include for all necessary lowering, etc., removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plasteringcomplete all as specified and directed.

M&L for 10mm thick plastering in CM 1:6 on fair faces of bricks or concrete surfaces (internal surfaces) finished even and smooth w/o using extra cement

M&L for Preparation of new surface of wall and applying two coat of oil emulsion distemper over a coat of primer over 3mm thick wall care putty on internal walls surfaces complete all as specified and directed.

M&L for 15mm thick external plastering in CM (1:4) with water proofing compound on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed. (Water proofing compound will measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two or more coats with 100% premium acrylic emulsion paint having VOC content less than 50 gms/litre and UV resistance as per IS 15489:2004, alkalie and fungal resistance, dirt resistance, exterior paint of required shade with silicon additives @ 1.43L/10sqm over and including priming coat of exterior primer applied at 0.9L/10sqm complete all as specified and directed by Engr-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer ,as per manufacturer's specification.

M&L for 5mm thick plastering in CM 1:3 on fair faces of concrete surfaces (ceiling surfaces) finished even and smooth w/o using extra cement

M&L for Preparing of new plastered surface of ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for Preparing of new plastered surface of ceiling surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for Preparation of old decorated surafces of wall and applying one coat of oil emulsion distemper(white/tinted) after making existing surface good by putty fillingwherever required on internal walls surfaces complete all as specified and directed.

M&L for Preparation of old decorated surafces by Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat of oil emulsion distemper(white/tinted) over putty filling wherever required on internal walls surfaces complete all as specified and directed.

M & L for complete removal of existing treatment on surfaces of wall all as specified and directed.

Material and labour for applying 3mm thick wall care putty on internal walls surfaces complete all as specified and directed.

Material and labour for applying two coat of oil bound distemper(white/tinted) over a coat of primer on internal walls surfaces complete all as specified and directed.

M&L for Preparation of old decorated surface of wall and applying two coat of white wash on walls surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces, including complete removal of existing treatment over external walls. Note : 1. Removal of existing treatment shall be carried out by mechanized means and by jet washing (90-150 bar) as required and directed by Engr-in-Charge 2. The building shall be of G to G+3 confrigration. The cost of staging/ scaffolding are deemed to be included in the quoted rates of the items.

M&L for applying two or more coats on old surfaces with 100% premium acrylic emulsion paint having VOC content less than 50 gms/litre and UV resistance as per IS 15489:2004, alkalie and fungal resistance, dirt resistance, exterior paint of required shade with silicon additives @ 1.43L/10sqm over and including priming coat of exterior primer applied at 0.9L/10sqm complete all as specified and directed by Engr-in-Charge. Note: Following stage of work will be checked and approved by Engr-in-Charge before proceeding to the next stage: 1.After washing and removal as specified in Item No. 17 2.After application of Primer

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint,as per manufacturer's specification.

M&L for Preparing of old decorated plastered surface of ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M&L for Preparing of old decorated plastered surface of ceiling surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed.

M&L for writing letters and figures (Block, roman, italic or indian) not exceeding 30 cm high with synthetic enamel paint complete complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) 25mm thick as in levelling course complete all as specified and directed.

M&L for Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed

M&L for Vitrified Light Shade Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including Screed 20mm thick in CM 1:6 complete

M&L Non - skid Ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L Non - skid Ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for backing coat with cement mortar 1:4, 10mm thick on fair faces of brick work or concrete surfaces to receive wall tiles/ dado complete all as specified and directed.

M&L Glazed ceramic colured tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc. complete all as specified and directed.

Material and Labour for Brickwork with fly ash modular bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in below or above ground floor and paving not exceeding 15 cm thick (unreinforced) complete all as specified and directed

Material and Labour for Cement concrete 1:3:6 (type C2) using 40mm graded stone aggregate 75mm thick as in sub base complete all as specified and directed.

Material and Labour for PCC 1:3:6 (type C-1) 20mm graded aggregate, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-calls, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down or up steel tubing and connections including cleaning for refixing or removal to store 15mm bore complete all as specified and directed.

Taking down or up steel tubing and connections including cleaning for refixing or removal to store 20mm bore complete all as specified and directed.

Material and labour for Cutting chases on brick walls , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Supply & laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply & laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair for in CPVC 20mm Brass Elbow (3/4 x 1/2)

S&F in repair for in CPVC 20mm Brass Tee

S&F in repair for in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA)

S&F in repair for in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA)

Supply and fixed in repair Bib taps 15mm bore chromium plated cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrulo and fixed complete all as specified and directed.

Supply and fixed in repair Angle stop cock 15mm bore with wall flange cast copper alloy , CP complete all as specified and directed.

Supply and fixed in repair Stop cock fancy type chromium plated with long shank and cup (Concealed type) screwed down high pressure with crutch or butterfly handle screwed bot ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

Supply and fixed in repairs 15mm dia brass chromium plated swan neck pillar tap with single lever complete all as specified and direction

Supply and fixed in repair 15mm Brass CP mixer (three in one faucet) for mixing hot & cold water including three joints to steel pipes or union and plugging and screwing to wall complete all as specified and directed

Supply and fixed in repair 15mm two way bib cock chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixed in repair Brass chromium plated shower rose 125mm with 450mm arm complete all as specified and directed.

Supply and fixed in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed

Supply and fixed in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf dia not less than 200mm with chromium plated bracket guard

Supply and fixed in repair Tubular towel rail 20mm dia(d) type 60cm long between flanges Brass chromium plated complete all as specified and directed.

Supply and fixed in repair Health faucet ABS Body mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and brass wall hook including making connections and fixed in position complete all as specified and directed.

Supply of PVC valveless, syphonic action type flush tank in repair,10 litre capacity with inlet ball valve, float & handle including brackets complete etc complete all as specified and directed.

Supply of flush pipes of PVC 32 mm dia for low level cistern, rubber cones, complete all as specified and directed.

Supply and fixed in repair PVC connection 15 mm size with PTMT nut of length 600 mm, complete all as specified and directed.

Supply and fixed in repair PVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and directed.

Supply and fix for Grating PTMT (Minimum weight 40gms) 100mm size fixed to repair complete all as specified and directed.

Supply & fixed in repair vitreous china wash down water closet pan (pedestal pattern), white connecting to trap and to flushing pipe front or back inlet etc complete all as specified and directed.

Supply and Fix in repair vitreous china wash down water closet(pedestral pattern) white colour of 'P' and 'S' trap combbine pan(couple coset) with all accessories and fittings complete all as specified and directed. Make: CERA, Cona jet Cat No S1013246, Clayton Pro 220mm cat No S1013245/ or equivalent

Supply of Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixed in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections including 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed.

Supply and fixed in repair wash hand basin, white flat back size 550 x 400mm including brackets, and pinning in ends of brackets for erecting stand etc complete all as specified and directed.

Supply and fix in repair Vitreous China wash basin with full pedestal size 570x470x190 mm including all fittings complete all as specified and directed.

Supply and Fix in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as specified and directed.

Supply of 32mm brass chromium plated waste fittings for WHB & Sink complete all as specified and directed.

Supply of 32mm waste pipe for WHB & sink complete all as specified and directed.

Supply and fix PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix PVC (SWR) multi floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixed in repair sinks made of stainless steel 1 mm thick kitchen or lavatory with plugs, washers and wastes; including beeding in CM on dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410x330x160mm complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Dismantling cast iron drain pipes of dia 100mm/75mm complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

Supply and fix 75 mm PVC(SWR) Bend complete all as specified and directed.

Supply and fix 50 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

Supply and fix 110mm PVC (SWR) Bend complete all as specified and directed.

S & F 110 mm PVC (SWR) bends any radius provided with access door.

S & F 110 mm PVC (SWR) branch piece, single (single T) equal or unequal provided

S&F for 110 mm PVC(SWR) reducer

S&F for PVC (SWR) vent cowl 75mm Dia.

Dismantling water tanks and removing to store capacity not exceeding 250 Ltr complete all as specified and directed.

Dismantling water tanks and removing to store capacity exceeding 250 Ltr not exceeding 500 Ltr complete all as specified and directed.

Dismantling water tanks and removing to store capacity exceeding 500 Ltr not exceeding 1000 Ltr complete all as specified and directed.

Dismantling water tanks and removing to store capacity exceeding 1000 Ltr not exceeding 2000 Ltr complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank (Cylindrical/rectangular vertical with closed top ) hoisted & fixed in position all as specified in SSR Part I capacity of tank 250 ltr complete complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR Part I capacity of tank 500 ltr complete complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR Part I capacity of tank 1000 ltr complete complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR Part I capacity of tank 2000 ltr complete complete all as specified and directed.

Supply and fixed in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends complete complete all as specified and directed.

Supply and fixed in repair ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete complete all as specified and directed.

Supply and fix sheet glass ordinary quality and glazing with oil putty/Neoprene rubber/silicone beading in square not exceeding 0.5 sqm each pane 4mm thick complete all as specified and directed.

Supply and fix Figured glass pin head type glazed with oil putty/Neoprene rubber/silicone beading in square not exceeding 0.5 sqm in each pane 4mm thick complete all as specified and directed.

S&Fin repair Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed to existing shutters of any description.

Supply and fixed in repair fancy type curtain rod 25mm dia with heavy duty brackets, both of SS 304 grade and thickness not less than 1.2mm including stops, rollers etc complete all as specified and directed.

Supply and fixed in repair floor door stopper aluminium body with overall length 140mm complete all as specified and directed.

Supply and fixed in repair Door closer hydraulically regulated,designation No, 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (aluminium) complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) area not exceeding 1.5 sqm each complete all as specified and directed.

Taking down chowkat with shutter(without taking off shutter from the frame) area exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2sqm each etc.complete all as specified and directed.

Supply and Fix for 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

Supply and Fix for factory made uPVC white/ coloured fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge(Glass shall be paid separately). Note:1. For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 2. The complete fixing and making good of the connected walls shall be completed within 10 days from the start of taking down of existing windows/ventilator.Rs 500/day shall be penalised in case of delay of work beyond 10 days.

Providing and fixing factory made uPVC white colour Sliding window Area not exceeding 2.00 sqm each Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply and Fix Plain colour PVC sheet of 2mm thickness fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site complete all as specified and directed.

S & F for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Powder coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F aluminium grills DG-104 of Deco Grill/ Hindal 10 mm thick diamond shape with aperture 10.0cm for windows

Supply and Fix for factory made Plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated IInd class H.W rail and style complete all as specified and directed. Note: The complete fixing and making good of the connected walls shall be completed within 10 days from the start of taking down of existing doors/windows/ventilators.Rs 500/day shall be penalised in case of delay of work beyond 10 days.

Material and Labour for 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed. Note: The complete fixing and making good of the connected walls shall be completed within 10 days from the start of taking down of existing doors/windows/ventilators.Rs 500/day shall be penalised in case of delay of work beyond 10 days.

Material and Labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed.

Supply and Fix for Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed complete all as specified and directed.

Supply and Fix for solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and Fix for factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PCV 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and directed.

Supply and Fix for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long complete all as specified and directed.

Supply and Fix Butt hinges, medium weight cold rolled stainless steel and fixed 100mm long complete all as specified and directed.

Supply and Fix Butt hinges, medium weight cold rolled stainless steel and fixed 75mm long complete all as specified and directed.

Supply and Fix Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long complete all as specified and directed.

Supply and Fix Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

Supply and Fix Aluminium handles cast type anodised 150 mm long complete all as specified and directed.

M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar n exc half brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

Supply and Fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply and fix in repair to cabinets in required size at site made of WPC 18 mm thick one side decorative finish sheet and shutters made of 18mm thick one side decorative finsh sheet all required brackets 5.5 screws etc. The Panels shall be fabricated using dhensive and screws where required. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specificaion complete all as specified and directed. Note : Quoted rate deemed to included the cost of all necessary fittings like SS hinges of reqd size invisible type and handles etc.Quoted rate deammed to include cost of side,back and bottom panels and necessary locking arrangments etc.

M&L for fix Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and asper direction of Engineer In Charge

M&L for Non asbestos fibre cement building boards, 6mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as per direction of Engineer In Charge

S & F in repairs Mortice lock of 2 levers mild steel, vertical type, size 100 mm

S & F Door Bottom Sealing Strip Draft Stopper with Aluminium Plate & Nylon Bristles for Weather Stripping, Air & Sound Blocking

Demolition of reinforced cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M&L RCC type B1 1:2:4 (20 mm graded aggregate) as in slab supported on walls, beams and colum s in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as aspecified and directed

M&L for Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surfaces, not exceeding 20 mm thick (horizontal or sloping) complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces complete all as specified and directed.

M&L for for MS TMT Bars of 10 mm dia and over,cut to length,bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip complete all as aspecified and directed

Disconnecting existing tanks exc 250 but n.exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Material and Labour Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 250 & n exc 500 and from mouths of circulating pipes, etc.

Disconnecting existing tanks exc 500 but n.exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Material and Labour Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 500 & n exc 1000 and from mouths of circulating pipes, etc.

Disconnecting existing tanks exc 1000 but n.exc 2000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Material and Labour Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 1000 & n exc 2000 and from mouths of circulating pipes, etc.

Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of n.exc 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

M&L for Vitrified Light Shade Ceramic tiles 8-10 mm thick (square/ rectangular) polished, cut into desired width, set and jointed in neat cement slurry and pointed in white or coloured cement to match for skirting including backing coat of 10mm thick CM 1:3 complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick in riser of steps or skirting including backing coat of 10mm thick CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Supply of 15mm dia Pillar taps, castcopper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe

Supply of 15mm dia Fancy type Pillar taps, castcopper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe

S&F in repair of 15mm dia Pillar taps, castcopper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe

S&F in repair of 15mm dia Fancy type Pillar taps, castcopper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe

Supply and fixed in repair PVC valveless, syphonic action type flush tank in repair,10 litre capacity with inlet ball valve, float & handle including brackets complete etc complete all as specified and directed.

Supply and fixed in repair for Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply of 40mm brass chromium plated waste fittings for WHB & Sink complete all as specified and directed.

Supplyof 40mm waste pipe for WHB & sink complete all as specified and directed.

Supply and fixed in repair 40mm brass chromium plated waste fittings for WHB & Sink complete all as specified and directed.

Supply and fixed in repair 40mm waste pipe for WHB & sink complete all as specified and directed.

Supply and fixed in repair 32mm brass chromium plated waste fittings for WHB & Sink complete all as specified and directed.

Supply and fixed in repair 32mm waste pipe for WHB & sink complete all as specified and directed.

Dismantling wrought iron or mild steelwork for grills or guard bars etc

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Supply and Fixed in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long complete all as specified and directed.

Supply and Fixed in repair Butt hinges, medium weight cold rolled mild steel and fixed 100mm long complete all as specified and directed.

Supply and Fixed in repair Butt hinges, medium weight cold rolled mild steel and fixed 75mm long complete all as specified and directed.

Supply and Fixed in repair Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long complete all as specified and directed.

Supply and Fixed in repair Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

Supply and Fixed in repair Aluminium handles cast type anodised 150 mm long complete all as specified and directed.

Supply and Fixed in repair Aluminium handles cast type anodised 125 mm long complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2sqm each and refixing in the same opening after easing and adjusting etc.complete all as specified and directed.

Taking down shutter of any description exceeding 2sqm each and refixing in the same opening after easing and adjusting etc.complete all as specified and directed.

Sagar Constructions (BID ID -3395364)

SAI ENGINEERS & CONTRACTORS (BID ID -3390278)