Providing new MS Panel board for non-essential load and laying new LT UG cable at Power House no.1 (near Mega Hostel), at NITK, Surathkal.

Amount

Supplying 1.1 KV, XLPE or Heat Resistant PVC insulated LT UG cable of 3.5 core x 300 sq mm size having aluminium conductor PVC insulated, extruded inner sheathed, galvanized, steel strip conforming to IS 3975: 1990 – 32 GI Strips – 4 x 0.8mm - and extruded PVC outer sheathed armoured cable as per IS – 1554 Part 1: 1998 or IS-7098 – Part -1. Make: Havells/ Unistar/ Nicco/ SBEE/ / CCI - Tropadar make/ Equivalent other makes.

Supplying 1.1 KV, XLPE or Heat Resistant PVC insulated LT UG cable of 3.5 core x 95 sq mm size having aluminium conductor PVC insulated, extruded inner sheathed, galvanized, steel strip conforming to IS 3975: 1990 – 21 GI Strips – 4 x 0.8mm - and extruded PVC outer sheathed armoured cable as per IS – 1554 Part 1: 1998 or IS-7098 – Part -1. Make: Havells/ Unistar/ Nicco/ SBEE/ / CCI - Tropadar make/ Equivalent other makes.

Labour charges for laying 1.1 KV class LT UG cable in Existing Trench/GI pipe/Stone Ware/on wall/ on pole using Wooden/Aluminium Rollers as directed by the departmental staff – Cables of 300 sqmm

Labour charges for laying 1.1 KV class LT UG cable in Existing Trench/GI pipe/Stone Ware/on wall/ on pole using Wooden/Aluminium Rollers as directed by the departmental staff – Cables of 95 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of following sizes – 300 sqmm – Make: Braco/Dowells/Glostar and equivalent other makes.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of following sizes – 150 sqmm – Make: Braco/Dowells/Glostar and equivalent other makes.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of following sizes – 95 sqmm – Make: Braco/Dowells/Glostar and equivalent other makes.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of following sizes – 50 sqmm – Make: Braco/Dowells/Glostar and equivalent other makes.

Supply and fixing of 75mm dia. size heavy duty cable glands suitable for UG cable of 1.1KV class (metal only). Make: Dowells/ Mico/ Braco/ Ravi/ Jainson/ Glostar/ Equivalent other makes.

Fabricating supplying and mounting MS box made out .16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint & finally finished with approved colour etc., complete. – Approximate size of the panel (150x160x90 cm)

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism – Four pole 800 Amps 50kA.- Make: Legrand/ABB/L&T/Schnyder / Equivalent other makes.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Circuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism – Four pole 400 Amps 50kA - Make: Legrand/ABB/L&T/Schnyder / Equivalent other makes.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Circuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. - Four pole 250 Amps 35kA - Make: Legrand/ABB/L&T/Schnyder / Equivalent other makes.

Supplying 1000 Amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. -1000 A 2 run of 4x60x10mm Aluminium strips.

Supplying 400 Amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. - 400 A 4x50x10mm Aluminium strips.

Supplying of multi-function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 75x150x75x6mm C channel

Supplying and making 3.5 core 300 Sqmm Heat shrinkable type straight through jointing kit suitable for 1.1 kV class LT UG cable as per IS-13573 – Make: Reychem/MIC/Equivalent other makes.

Supplying, fixing and wiring 1000/5A to 1600A 15VA Burden class 1 Current Transformers.

Supplying and fixing of shunt Trip suitable for MCCB CBCT

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.

Raaj power solutions and facilities

Shantha Electricals and Engineers Pvt Ltd