Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹23.1 L+₹6.7 L (41.1%)Rejected-Finance NEAR PUNJAB NATIONAL BANK KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU | JAMMU AND KASHMIR | 181221 | L2 | Rejected-Finance L2 |
Tender Value
₹14 L
EMD Value
₹42,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
GE Nagrota
SPECIAL REPAIRS TO CERTAIN BUILDINGS UNDER AGE B/R-II IN GE NAGROTA AT RISK AND COST
2022_MES_533875_1
GEN-03/2022-23
Open Tender
Civil Works - Highways
Works
120 days
Nagrota
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
₹42,000
Yes
23 Feb 2023
29 Jun 2022
29 Jul 2022
29 Jun 2022
27 Jul 2022
13 Jul 2022
29 Jun 2022 - 6 Jul 2022
60 days
Amount
Taking down cement plaster of any description from brick wall or concrete surface including racking out joints hacking for key scrubbing down with water etc all as specified and directed by Engr-in charge
Demolition of cement concrete in floor/pavings including terrazzo floor/tiles of any description n.exc 15cm thickness below or above GL and removing debris from the premises all as specified and directed by Engr-in charge.
Demolition of cement concrete in floor/pavings including terrazzo floor/tiles of any description n.exc 15cm thickness below or above GL and removing debris from the premises all as specified and directed by Engr-in charge.
BLANK
Taking down chowkats or frames n.exc 1.5 Sqm each ( w/o taking of shutter from the frame) and removing from site.
All as srl item No. 05 hereinbefore above but exc 1.5 sqm but not exc 4 sqm each.
Dismantling wrought iron or mild steel work of any description not otherwise provided for gate etc
Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings.
Providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified.
Providing 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) finished even and rough as in toping layer for laying floor tiles complete all as specified.
BLANK
BLANK
Coloured printed Non-skid ceramic tiles 400x400x7mm thick in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
10mm thick cement plaster in CM 1:4 on fair faces of brick work of concrete surface for laying wall tiles finished surface fair and even complete all as specified.
Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement match the tiles complete all as specified and directed .
Taking down existing roof trusses, purlins, rafters etc. and cleaning, preparation of surfaces and applying two coats of synthetic enamel paint before refixing in old /new place all as specified and as directed by Engineer-in-Charge .
BLANK
Brick work (burnt clay bricks ) built in CM 1:6 with sub class B bricks straight or curved on plan to any radius all as specified and directed.
BLANK
PVC wall panelling using 6mm thick PVC sheet ( using tongue and groove system for connecting two piece of panelling ) ( size of one panel 250mm wide x 100 mm height) fixed as in repair complete all as spd and directed.
BLANK
15 mm thick cement plaster in CM 1:4 finished even and smooth without using extra cement on fair faces of brick work complete all as specified.
5 mm thick cement plaster in CM 1:4 on ceiling concrete surface facia chajja roof projection etc finished even and smooth without using extra cement complete all as specified.
BLANK
PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection 50mm thick finished even and fair complete all as specified.
Band traps ,supports or stays for rain water, ventaling pipes including bolts if required hooks , stays, hold fast, wall ties clamps all as specified and directed.
Soild PVC single door frame of size 50mm x 47mm made out of 5mm but single side prelam PVC sheet reinforced with MS tube supplying & fixing in opening as per specification and drawings.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail penelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings.
BLANK
3mm thick sheet glass ordinary quality and galzing with oil putty in square n.exc 0.5 sqm in each pane.
All as per item No 30 here in before above but figured glass, pin head type.
S & F in repair Stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staples.
Trepezoid Profile colour powder coated 0.50 mm thick semi corrugated steel sheeting fixed in roof with self drilling screw as per manufacturer instruction
BLANK
Mild steel work as in wind tie for roof including securing bolts, including all necessary drilling, bolting or riveting, etc. and similar work confirming to Fe-410 Gde or Fe-310 and applying a shop coat of red oxide primer complete all as specified and directed.
Hacking out old broken glass (any thickness size qty or description) from wooden or steel frame glazed with putty or fixed with heads complete all as specified.
S&F in repair drapery rods of 25mm dia plastic coated fixed on wall including funnels and brackets complete all as specified.
Butt hinges medium weight cold rolled mild steel 100 mm long.
250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.
Aluminum handles, cost type anodized 150 mm size (ISI Mark) complete all as specified.
Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed complete all as specified.
Aluminum anodized barrel tower bolt extruded section 200mm size complete all as specified.
Elevation tiles bed rock Terracota brick tiles 240x74mm make: Ultra or equivalent fixed to walls over and including 10mm thick screed bed in CM 1:3 incl jointing and pointed white or coloured cement to match the surfaces complete all as specified.
Dismantling of wall and ceiling board any type in any position complete all as specified.
GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. 600 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 8 mm thick aqueostic tile with square Edge of size 595x595 mm be placed in the grid of 600x600mm.Size of T-Grid:- Main T-24 x 32 x 0.3mm thick and length 3600mm, cross T-24x25x0.3mm thick and length 1200mm, cross T-24x25x0.3mm thick and length 1600mm wall angle-24x24x0.4 mm thick and length 3000 mm Make: SANT-GOBAIN Gyproc/ Everest
Cutting holes in brick walls or in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-0 as required exc half brick and nexc full brick complete all as specified.
18-20mm thick granite stone 60 cm wide, length not less than 2 m (of any coloured) work table rubbed and polished) as in counter W.H.B Platform, shelves etc including rounding and grinding of edges mirror polished laid over and including 15 mm thick in cement mortar 1:4 bedding and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade including cutting of hole complete all as specified and directed.
Moluldig on edges of granite complete all as specified and as directed by Engr in Charge .
Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete
All as per srl Item No 49 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girthbuilt in CM
Precast RCC M 20 grade, (using 20mm graded stone aggreggates), as in cover slabs (for manholes/drains etc and similar work including all necessary form and mouleds complete all as specified and directed
Applying two coats of exterior acrylic emulsion on old wall surfaces after and including applying a coat of acrylic primer and also including complete removal of existing surfaces etc as per manufacturers instructions complete all as specified.
Preparation of steel and iron surfaces of any descrption not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint all as specified.
White washing two coats on newly plastered surface of ceiling including preperation of surface all as specified and directed.
Preparation to old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge.
Preparation to old decorated plastered surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and apply one coat of cement base paint , complete all as specified & directed by Engineer-in-charge.
Preparation of steel and iron surfaces of any descrption not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.
Blank
Complete removal of existing treatment from wall surfaces by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and including material & labour for old surface applying complete with J K wall putty 3 mm thick over one coat of primer and two coats of oil bound distemper in wall etc all as specified and as directed by Engineer-in-Charge.
Applying two coats of exterior emulsion paint on newly plastered surfaces over a coats of white wash including preparation of surfaces.
Complete removal of existing treatment and applying two coats of texture paint of approved on wall including preparation of old surfaces complete all as specified and directed by the Engineer-in-charge
Aluminium door shutter with frame of aluminium section standard size of 1.6mm thick ( wt of section not less than 0.55 Kg per RM) with following specifications including taking down existing chowkhat with shutter : - a) Top rail, lock rail and style 80 x 45mm. b) Bottom rail 150mm x 45mm. c) Chowkhat 105 x 45mm. d) 5.5mm thick tinted sheet glass jointing cleats, glazing clip rubber packing anodized aluminum snap beading. e) Suitable automatic floor mounted hydraulic door closer heavy duty with pivot aluminium body ISI marked. Make: Everest/Sindhu f) Pad lock brass, 6 livers of make : Harrison/Link. g) Aluminum alloy anodized tower bolt 200mm long, 02 Nos to each leaf ( 12mm rod) h) Aluminum anodized handle 300mm long, 02 Nos for each leaf. Make - Jindal / Indal or equivalent as approved. Note :- Quoted rates are deemed inclusive for making good, jambs with plastering in CM (1:3) & necessary distempering to match the existing surfaces.
BLANK
Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
Taking down steel tubing 15 mm bore and connections,including cleaning for refixing or removal to store complete all as specified.
Taking down steel tubing 20 mm bore and connections,including cleaning for refixing or removal to store complete all as specified
15 mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including cutting chases in brick/ terrazzo walls exc 10cm girth but n.exc 20cm girth and plastering in CM 1:3 complete all as specified and directed.
BLANK
BLANK
BLANK
Cutting chases in bk wall for concelled water tubing exc 10 cm but n exc 20 cm girth complete all as specified and directed.
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
15 mm bore Concealed stop cock fancy type CP with long shank and cup washer as in repairs complete all as specified and directed.
BLANK
BLANK
Fancy type bib tap brass CP ( Long body) 15mm bore as in repairs complete all as specified and directed.
BLANK
Aluminium Wardrobe hook set of three 50 mm to 60 mm complete all as specified and directed.
BLANK
PVC looking cabinet mirror size 470x570mm and fixed to wooden plugs with chromium plated, brass screws and cup washers fixed "as in repair" complete all as specified and directed.
BLANK
BLANK
Shower rose 125 mm size, brass, chromium plated, with swive joints, including fixing to steel pipe or union "as in repair" complete all as specified and directed.
BLANK
BLANK
BLANK
BLANK
110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
110mm dia PVC (SWR) bends any radius complete all as specified and directed
Taking down existing treatment from roof slab of any description including brick tiles,mud fuska,screed complete upto RCC slab roof and removing debris outside MOD land complete all as spd
PCC 1:2:4 type B0 ( using 12.50mm graded crushed stone agg) 25 mm thick laid to slope finished even & smooth without using extra cement complete all as specified and directed.
20mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces using WPC complete all as specified and directed.
Supply only Water proofiing compound complete all as specified.
Applying bitumen primer @ 0.40 kg/sqm complete all as specified.
Applying evenly tack coat of industrial bitumein 85/25 @ 1.20 kg/sqm including cleaning surfaces complete all as specified.
APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.00 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions(ii) Minimum overlap of 100 mm and 75 mm shall be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions.(iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd).
Applying one coat of bitumen aluminium paint complete all as specified
Removing building materials etc obtained from demolition to a distance upto 1 KM beyond the lead including in rates loading unloading and stacking at destination complete all as spd
Dismantling structural steel work including angle post,doors, gates but excluding framed truss etc complete all as specified .
Dismantling fencing wire mesh, any type complete all as specified.
BLANK
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 50 cm and making good surfaces complete all as specified .
Cement concrete 1:3:6 type C-2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified .
Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified .
BLANK
Refixing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified .
Supply and fixing chain link fencing of 3.15 mm GI wire of mesh size 100 x 100 mm straining with nut bolt and MS flat of suitable size to post complete all as specified and directed. Note (Nut bolts and MS flat shall be measured and paid separeately)
Applying two coats of synthetic enamel paint over new treated steel surfaces any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified .
Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Concertina coil 900mm dia and 150 mm prolong fixing to any standard rails including screwing in position all as specified.
BLANK
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
Excavatioin in trenches in soft/loose soil not exceeding 1.50mtr wide and not exceeding 1.50mtr in depth for foundation etc and getting out complete all as specified.
All as per item No 120 above but exceeding 1.50mtr but n.exc 3.00mtr -ditto-
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified.
PCC type D-2 (1:4:8) using 40mm graded stone aggregates as in filling & mass concrete complete all as specified.
Walling random rubble , uncoursed, well bonded bedded and solidly hearth built in CM 1:4 complete all as specified and as directed.
Precast cement concrete type B1 1:2:4 , 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Granite or Trap stone
Extra for forming fair finished drain or channel 30cm inner girth in cement concrte using extra cement including forms, moulds mitred, stopped ends etc all as specified and as directed
Add or deduct for each 25 mm girth or part thereof over of under 30 cm ditto all as specified and as directed.
Flush pointing to brick walls in cement and sand mortar (1:3) complete all as specified.
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
Taking down unserviceable sub main wiring including wooden batten/PVC conduit of any size, complete, all as specified and directed by Engr-In-Charge.
BLANK
Point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following;-
(a) One light point controlled by one switch 6 Amp.
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
LED light fitting 1x10W bulk head luminaries IP 65 complete with all accessories including LED lamp 10 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz .Cat part no.BIBWP 10 W LED or equivalent in Havells / CG.
BLANK
Sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 25 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6.0 sq mm as earth continuity conductor connected to commen earth and earth dolly complete .
BLANK
Lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. Anchor (Penta) or equivalent model of Cona/Havells/HPL
LED bulb 7 watt complete all as specified and directed. Make Bajaj /Havells
BLANK
MCB DP 63 Amps 10 KA 230 volts "C" series complete.
BLANK
BLANK
BLANK
BLANK
M/s Khajuria Construction Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .