SPL REPAIR TO VARIOUS SUB STATION UNDER POWER HOUSE-I AREA UNDER GE PANAGARH

Amount

Dismantling, floor, hearth or wall tiling /terrazo including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including facilitate for cutting of reinforcement complete all as specified and directed

Taking down chowkhats or frames n. exc. 1.5 Sqm with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed.

Taking down chowkhats or frames exc. 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed

Taking down cement plaster on brick orstone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified and directed

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off from the premises complete all as specified and directed

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick CM 1:3 screed bed or bedding layer incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off from the premises complete all as specified and directed

M&L for brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:6) complete all as specified and directed

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick wall in CM (1:4) complete all as specified and directed

Excavation in trenches in any type of soil n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC 1:2:4 type B1 using 20mm stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for RCC 1:2:4 type B1 using 20mm stone aggregate as in chajjas complete all as specified and directed

M&L for M-30 Design mix (using 20mm graded stone aggregate) beams, cantilevers, bressum RCC 1:2:4 type B1 as in intels over 1.5m span complete all as specified and directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) columns, pillars, piers, posts and struts complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Formwork to chullah hoods, cha?jjas, troughs and similar items including complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for rendering 15 mm thick in Cement Mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement, using with Integral Water proofing compound in the mortar complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

M&L for rendering 15 mm thick in Cement Mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed

Moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for sand filling under floor in foundation including watering and consolidation complete all as specified and directed

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of new plastered surfaces complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for complete removal of extg treatment by means of mechanical and hand where the machine can not reach and preparing the rough wall surfaces with exterior wall care putty and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for three coats of white wash as in ceilings on newly plastered surfaces including preparation complete all as specified and directed

M&L for complete removal of extg treatment and applying two coats of white wash as in ceilings on old plastered surfaces including preparation complete all as specified and directed

M&L for three coats of white wash as in walls on newly plastered surfaces including preparation complete all as specified and directed

M&L for complete removal of extg treatment and applying two coats of white wash as on walls on old decorated plastered surfaces including preparation complete all as specified and directed

Grooves for joints, tongues of cills, etc., throat (or small weather groove) as for cills, drip courses, etc. and rebates as for joints complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finish complete all as specified and directed

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto over 10mm thick in cement mortar CM (1:3) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter with half panel and mesh made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F butt hinges stainless steel 100mm long, medium weight, cooled rolled complete all as specified and directed.

S&F 150mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed

S&F 150mm long extruded Aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm long complete all as specified and directed

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint to over a coat of pink primer on surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified and directed

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pan complete all as specified and directed

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 Type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, including demolition of cement concrete (un-reinforced) roof surfaces complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick factory made plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as specified and directed by Engineer-in-Charge.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified and directed

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed

Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

Ball bearing 450mm long for rolling shutters complete all as specified and directed

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

Taking down the extg Rolling shutter cleaning of the parts viz, spring, ball bearings, hood cover, guide rail, etc and refixing in the same opening including greasing for smooth operation complete all as specified and directed by Engineer-in-Charge

Aluminium alloy 250mm long anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

Preparation of new surfaces and applying two coat of synthetic enamel paint to wood and wood based surfaces paver a coat of primer of any description not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for 75 mm thick, Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 10mm thick in CM 1:4 finished even and fair using with water proofing compound complete all as specified and directed.

Supply only integral water proofing compound (liquid admixture). (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for preparation new surface of roof and applying two coat of polyurethane (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage /seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge (Notes- 1.as per description of the items minimum two coats of polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by the as per manufacture instruction.pl note no price adjustment shall be made, if more coats of (PU)acrylic based water proofing liquid compound & primer are required for roof treatment. 2. quoted rate shall be deemed to be included for work in building/structure of any height).

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in surface channel or drains complete all as specified and directed.

S&F 15mm dia Tubes medium grade galvanised with all fittings and fixed complete to walls, floor etc complete all as specified and directed.

S&F 20mm dia tubes medium grade galvanised with all fittings and fixed complete to walls, floor etc complete all as specified and directed.

S&F in repairs Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed

S&F in repairs PVC valveless symphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 15 dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed

S&F grating doom 125mm dia with waste hole of PTMT(minimum weight 40gm) complete all as specified and directed

S&F 40mm bore PVC pipes (LDPE) of pressure rating 6kg/sqcm and fixed complete to walls, ceilings or in floors complete all as specified and directed

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F in repairs vitreous china wash basin, white, flat back size 550X400, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc connections but incl brackets complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for 100 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in kerb including necessary form work complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed

M&L for plain cement concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching. Haunching etc finished even and smooth complete all as specified and directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in CM 1:6 complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed

M&L for PCC 1:3:6 type C2 Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

S&F UPVC Eco-Drain pipe drainage sewaer system pipe bearing 160mm dia minimun 4mm thick including jointing with coupler, bend, tee as per site requirement complete laid in trenches or floors complete all as specified and as directed (Note: PCC haunching will be measured and paid seperately)

Demoltion of Brickwork or stone/boulder masonry, built in lcement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in preacast man hole cover slabs set in CM (1:6) complete all as specified and directed

M&L for 25 Users Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM (1:4), RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc.complete all as specified and directed

M&L for soakage wells exc, in ordinary soil, foundation Each 24840.00 in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick complete all as specified and directed

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed

Supply only MS Galvanaised chain link fencing of size 75X75mm dia of wire 3mm complete all as specified and directed

S&F Mild steel angle iron as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and directed

M&L for plain cement concrete Type D2 14:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

UNITED BUILDERS

NATIONAL CONSTRUCTION CO

M/s RAJEN ROY