Aluminum partition work and the installation of steel racks in the hall located on the fourth floor of the 10-Court Building of the Commercial Court, Lakhisarai."

TENDER BOQ FOR THE O;ogkj U;k;ky; y[khljk; ds 10 dksVZ Hkou ds prqFkZ ry ij vofLFkr gkWy esa Aluminium Partiton work djrs gq, dk;kZy;ksa dk fuekZ.k ,oa Lvhy jSdks ds vf/k"Bkiu lacaf/kr dk;ZA

Estimate of Cost :- Date of Tender :-

Earnest Money :-

Cost of BOQ :- Time of Complition :-

Sl. No. SR Item No. Item of Works Quantity Unit Rate Amount (Rs.)

1 21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 4950.96 kg 386.10 1911566.00

2 21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 286.65 kg 447.20 128190.00

3 0.3 M 2631+15% cp +1% L.cess Providing and fixing 4 MM Thick ACP do………..do………….all comp. Job. 692.50 M² 1277.65 884773.00

4 9.51.2 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with mild steel U beading 62.68 M² 639.90 40109.00

5 9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. 52.00 Each 78.40 4077.00

6 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 25.00 Each 57.10 1428.00

7 9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm 25.00 Each 210.10 5253.00

8 9.97.2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 25.00 Each 98.20 2455.00

9 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 2.00 Each 979.50 1959.00

10 15.7.4 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar 0.57 M³ 823.70 470.00

11 9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood 0.04 M³ 95670.70 3827.00

12 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirh necessary screwssqm 10.40 M² 2578.00 26811.00

13 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete 769.78 M² 9.70 7467.00

14 13.80A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 769.78 M² 81.10 62429.00

15 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. 1539.57 M² 117.30 180592.00

16 17.7.4+ 17.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 1.00 Each 3635.80 3636.00

17 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width 624.08 M 85.20 53172.00

18 0.2 Labs/OLO1 P/V Un Skilled labour for cleaning floors shifting File and other assocerries do…………do…………..all comp. Job. 15.00 Each 398.00 5970.00

Total Rs. 3324184.00

19 Add G.S.T @ 5.36% of S.O.R Items of Rs. 178176.00

20 AR Supply of Godraj MF System of Size 6'0''x36''x18'' With Six Shevels of Sloted Angle do………..do…………..all Comp. Job. 284.00 Each 8500.00 2414000.00

Total Rs. 5916360.00