Camouflage to certain Bldgs and Boundary Wall in Tech Area at AF Stn Sirsa

Amount

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

Material & Labour for preparing new Plastered Surfaces of Walls and applying Two coats of weatherproof exterior emulsion paint of required shade (Camouflage pattern) over and including priming coat of suitable exterior primer applied over new surfaces. complete all as specified and as directed. (NOTE: Paint & Primer ashall be applied as per manufacturer's recommendations)

Material & Labour for preparing new Rough Cast Plastered Surfaces of Walls and applying Two coats of weatherproof exterior emulsion paint of required shade (Camouflage pattern) over and including priming coat of suitable exterior primer applied over new surfaces. complete all as specified and as directed. (NOTE: Paint & Primer ashall be applied as per manufacturer's recommendations)

M&L for preparation of old painted steel sheet (corrugated/plain), by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots over 10cm width or girth complete all as specified and as directed.

Material & Labour for preparation of old painted steel sheet (corrugated/plain) by removing complete existing treatment over 10cm width or girth and applying a coat red oxide Zinc chrome primer, complete all as specified and as directed. NOTE FOR ITEM NO. 7 & 8:- (a) All safety measures for the safety of workers shall be ensured by contractor before exeution of work. (b) Insurance of worker shall be got done by conractor before execution of the work and the cost for the same shall deemed to be included in rate quoted by contractor. (c) The quoted rate shall deem to incude the cost of necessary scaffolding and form works as required for a height of building not exceeding 18mtr (Approx).

M&L for applying two coats of synthetic enamel paint (in camouflage pattern) over steel surfaces (corrugated/plain) exceeding 10cm width or girth complete all as specified and as directed. NOTE: (a) All safety measures for the safety of workers shall be ensured by contractor before exeution of work. (b) Insurance of worker shall be got done by conractor before execution of the work and the cost for the same shall deemed to be included in rate quoted by contractor. (c) The quoted rate shall deem to incude the cost of necessary scaffolding and form works as required for a height of building not exceeding 18mtr (Approx). (d) Painting to be done by using Airless Paint Sprayer Painting Machine Ceiling Spray Gun, having maximum pressure 3300PSI（22.7MPa), Max flow rate 2.0±10%（L/min), standard nozzle size 0.017,Length of high pressure hose 50m maximum complete all as per manufacturer instruction. (e) Contractor shall bring the required quantity of material in two lots in selaed containrs after approval of Make/sample and keep in MES store under custody of JE/Engr-in-charge.

Material & Labour for preparing old Plastered Surfaces of Walls and roof by Complete Removing of existing Treatment, rubbing to obtain a Smooth Surface, and applying a coat of alkali resistant priming paint complete all as specified and as directed.

Material & Labour for applying Two coats of weatherproof exterior emulsion paint of required shade (Camouflage pattern) complete all as specified and as directed. NOTE FOR ITEM NO 10 & 11: Rates quoted by the tenderer are included with following apllication as under:- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush , washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. (c) All safety measures for the safety of workers shall be ensured by contractor before exeution of work. Insurance of worker shall be got done by conractor before execution of the work and the cost for the same shall deemed to be incudided in rate quoted by contractor. (d) The quoted rate shall deem to incude the cost of necessary scaffolding and form works as required for a height of building not exceeding 18mtr (Approx). (e) Contractor shall bring the required quantity of material in two lots in selaed containrs after approval of Make/sample and keep in MES store under custody of JE/Engr-in-charge.

DCM ENTERPRISES

STAR CONSTRUCTIONS

M/s Satguru Traders

M/s GURFATEH BUILDERS

M/s Luxmi Constructions

Goyal Enterprises

Aditi Formation Company

Ajay Enterprises

YOGINDER KUMAR GUPTA AND COMPANY