PROVISION OF WORK SERVICES FOR IMPROVEMENT/UPGRADATION OF CANDIDATE MESS BLDG NO P 40 AND IMPROVEMENT UPGRADATION OF FRONT

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing dressed stone works and pre-cast concrete articles complete all as specified and as directed.

M&L for precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) block masonary with solid block exc 10 cm width and setting in CM 1:6 complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc. 4.0 Sqm in each complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sq m each complete all as specified and as directed.

Taking down Shutters of any description exceeding 1 Sq.m and n exc 2 Sq. m each complete all as specified and as directed.

S&F powder coated Aluminium section for door frame , windows, ventilators, etc with one or more rebates, including joining cleats for fixing necessary lugs complete frame work complete all as specified and as directed.

S&F powder coated Aluminium section for door shutters made out of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etx complete all as specified and as directed.

S&F powder coated Aluminium section for window and ventilator side hung type without sash bar made out of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium shap beading screws, powder coated aluminium fittings such as peg stays 150 mm long ( 1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle 1 no complete all as specified and as directed.

S&F powder coated Aluminium grill for window / ventilators of mesh size 100 x 100 mm and made out of 4 mm thick aluminium power coated sections including necessary fitting arrangements complete all as specified and as directed.

Supply and fix 4.8 mm thick sheet glass, ordinary quality fixed with PVC / neoprene gasket , angular glazing aluminium beads, rubber packing and glazing in squares n exc 0.5 sq m Each pane for sliding rack with sliding handle complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in openings all as specified .

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

Supply and fixing 125 mm long butt hinges, medium weight cold rold mild steel complete all as specified and as directed.

Supply and fixing 75 mm long butt hinges, extruded aluminium alloy with galvanised aluminium hinge pin, anodised, type C-21, complete all as specified and as directed.

Supply and fixing 100 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 100 mm long extruded alluminium alloy handle, cast type, anodized complete all as specified and as directed.

Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized complete all as specified and as directed.

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F in repairs floor door stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F in repairs door closer made of aluminium die cast body , hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed .

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed .

M & L for rendering 15mm thick in CM (1:4) on brick and concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed .

Dismatling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.50mm graded crushed stone aggregate as in flooring finished rough to receive tiles complete all as specified and as directed .

M&L for glazed coloured wall tiles of 300X450X7mm as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including10mm thick cement plaster in 1:4 as backing coat complete all as specified and as directed .

M&L for non skid coloured ceramic tiles 7mm thick of size 400mX400mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:6 complete all as specified and as directed .

M&L for 20 mm thick Granite (of any type (work table rubbed and polished) in steps, jambs, pillers window cillls , cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade Granite complete all as specified and as directed .

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed .

Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

All as per Item No 31 above, but , 20 mm dia bore complete all as specified and directed.

All as per Item No 31 above, but , 25 mm dia bore complete all as specified and directed.

Refixing old serviceable steel tubing 15 mm bore and connections with all new fittings in new or old position (walls, ceiling, floor etc) complete all as specified and directed.

All as per Item No 34 above, but , 20 mm dia bore complete all as specified and directed.

All as per Item No 34 above, but, 25 mm dia bore complete all as specified and directed.

S&F 16 mm outer dia CPVC Pipes SDR 11 & Plain CPVC SDR 11 fitting on walls/ceiling or laying in floors complete all as specified and directed.

All as per Item No 37 above, but, 20 mm dia bore complete all as specified and directed.

All as per Item No 37above, but, 25 mm dia bore complete all as specified and directed.

S&F in repairs including disconnecting tanks ,1000 ltrs rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repairs including disconnecting tanks, 500 ltrs rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F in repair chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repair 15mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.

S&F in repair 15 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

All as per item No 46 above, but , 20 mm dia complete all as specified and directed.

S&F in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

S&F in repairs of grating 150mmx150mm made out of stainless steel complete all as specified and directed.

S&F in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket complete all as specified and directed.

S&F in repairs vitreous china squatting pan, orissa pattern of size 580mmX440mm white with integral foot rests, fixed in repairs including trap set and provision ofconcrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (semi pedestal pattern) (Anglo Indian type), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F In repairs PVC valveless, symphonic action type flusing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 lts capacity complete all as specified and directed.

S&F flush pipe of polyethyene of low and high density of PVC 32mm for low level cistern as in repairs complete all as specified and directed.

S&F in repairs 110mm bore dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed

S&F in repairs 75 mm bore dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed

S&F in repairs 110 mm bore dia PVC (SWR) bends of any radius with access door complete all as specified and directed

S&F in repairs 75 mm bore dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement, fixed in repairs complete all as specified and directed.

S&F PVC (SWR) floor trap 125/110mm setting and jointing with solvent cement, fixed in repairs complete all as specified and directed.

S&F hand shower (Health Faucet) with 8mm dia 1.20 mtr long stainless steel flexible hose and wall hook fixed with brass screws complete all as specified and directed.

S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete all as specified and directed.

S&F in repairs 20 mm dia aluminium anodised decorative type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for applying 2mm thick wall care putty on wall complete including preparation of surfaces complete all as specified and directed.

M&L for applying 2mm thick wall care putty on ceiling complete all as specified and directed.

M&L for two coats of oil bound distemper over and including one coat of priming plastered and other surfaces with alkali resistan priming paint on newly plastered wall surfaces including preparation complete all as specified and directed.

Materials and labour for preperation of old decoratd surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying two coat of oil bound distemper complete all as specified and as directed.

Material and labour for preparing surfaces of steel and iron surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

M & L for french polishing on surfaces of wood and wood based material of any description width or girth, including cleaning and prearing the old surfaces with one or more coats complete all as specified and as directed.

M&L for preparing surfaces plastered or unplastered new surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and as directed .

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed .

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering in any curvature, fixed with self tapping screws complete all as specified and as directed .

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering in any curvature complete all as specified and as directed .

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed .

S&F compound girders and stanchions, lattice girders, aerial masts and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410-W (Gde E-250) quality 'A' complete all as specified and as directed .

M&L for 20 mm thick granite (of any type) tiles machine cut beded and jointed with grey cement slurry and pointed with white cement with admisture of pigment to match the shade of granite stone including griding and polishing type complete all as specified and directed

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting/dadolaid over cement screed bed and jointed with grey cement slurry and pointed with white cement with admisture of pigment to match the shade of granite stone including griding and polishing type complete all as specified and directed

Dismantling wall and ceiling boards (Fibre, pulp, insulation etc.) or insulation board/slabs/blankets) any thickness including cover fillets complete all as specified and as directed .

S& F anodised aluminium snap grid frame work for false ceiling all as specified complete all as specified and as directed .

M & L for 12 mm thick non asbestos fibre cement building board fixed or laid / inserted to timber /GI/Aluminium frame work with screw complete all as specified and as directed .

S&F 12 mm thick toughned glass door with double leaf shutter including fixed Glazing portion, all cutting edges, polishing, making holes, 300 mm long chromium plated handles, CP Brackes etc complete all as specified and directed. (Each leaf comprising of CP Handles - 02 Nos, CP Braackets - 02 Nos , Floor mounted hydraulic door closer -02 Nos, IAM Logo on glass door of size not exceeding 600 x 450 mm on both leaf duly computerised embowging complete all as specified and as directed .

M&L for applying 3 mm thick wall care putty on wall complete all as specified and as directed .

M & L two coats of distempering on wall and ceiling surfaces with Ist quality acrylic distemper (Ready Mix) having VOC content less than 50 gms/ ltr of approved manufactured of required shade and colour cmplete as per manufacture instructions complete all as specified and as directed .

Taking down carefully aluminium/ copper wiring/light point wiring complete with or with out conduits etc, including fittings such as switches ceiling roses etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully unserviceable sub main wiring of any size and type batten or conduit, surface or concelaed including removing material from site and making good the disturbed surfaces of walls, roofs etc to match the existing Complete all as specified and as directed. Note: Taking down of Fittings and Fixtures shall be measured under respective Items Separately.

M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through PVC cassing and capping 25mm size incl all accessories run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed mounted on walls with moduler cover plate with frame fixed for housing the moduler switches,sockets and regulator incl provision of 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed. (a) One Light point controlled by one switch

All as per item no 91 above, but, One fan/exhaust fan point controlled by one switch complete all as specified and as directed.

All as per item no 91 above, but, One 5A 2pin/3pin switch socket out let multipurpose on independent Board complete all as specified and as directed.

All as per item no 91 above, but, One 5A 2pin/3pin switch socket out let multipurpose on same board complete all as specified and as directed.

All as per item No 91 above, but , wiring complete with 4.0 Sqmm for 5 pin 5/15A socket multipurpose incl provision of 4.0 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly on independent board complete all as specified and as directed.

Supply & fixing modular switch 06 Amps 1 module complete all as specified and as directed.

S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed.

S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades ,down rods,electronic regulator and accessories ,230 V ,1200 mm sweep.Min air delivery 210CFM with service value 6 BEE.Five star rated with brusless direct current motor (BLDC) including taking out the existing handed over to E/M store complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter ,voltage 230 V ,50 Hz,rpm 1200 , copper winding of sweep 300 mm including taking out the existing , handed over to E/M store complete all as specified and as directed.

Making suitable size core cutting on stone/Bricks wall for fixing of exhaust fan 300 mm sweep and making good to the distrubed surface complete all as specified and as directed.

S&F for PVC ceiling rose two to three terminals complete all as specified and as directed.

Supply and fix in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repairs LED Tube light fitting 1 x20 W,220V CRCA housing with PC diffuser box type with driver,holder including LED tube light connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed.

Material and Labour for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 6 Sqmm along with one run 6 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit including taking out the existing one complete all as specified and as directed.

Material and Labour for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 4 Sqmm along with one run 4 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit including taking out the existing one all as specified and as directed

S&F in repairs MCB DB SPN 8 way double door 240 V, AC, 50 Hz complete all as specified and as directed.

S&F in repairs MCB SP 5 to 32 Amps rating, 10 KA 'Ç' curve 240V, 50 Hz AC Complete all as specified and as directed.

S&F in repairs MCB SPN 40 Amps rating, 10 KA 'C 'curve, 240V, 50 Hz AC complete all as specified and as directed.

S&F in repair Modular type Fan step regulator 120W type 2 modular complete all as specified and as directed.

Supply and fix electric water heater storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre,BEE 5 star rated complete with all accessories such as safety valve ,thermostate, NRV PV C hot water connection pipe including taking out the existing and handed over to E/M store complete all as specified and as directed.

Dismantling carefully the existing window type AC any capacity , General servicing and preventive maintenance of the unit including checking the operation of all safty device cleaning of electric contacts,checking the electric circuits and refixing the same after completion of B/R& E&M work all as specified at site complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed mounted on walls with moduler cover plate with frame fixed for housing the moduler switches incl provision of 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. (a) One Light point controlled by one switch

All as per item no 114 above, but, One 5A 2pin/3pin switch socket out let multipurpose on independent Board complete all as specified and as directed.

S&F modular switch and socket combination ,6 Amps- 2/3 pin combined 3 modular complete all as specified and as directed.

S&F repair MCB SPN 10 Amps Amps rating, 'C' series , 10 KA breaking capacity, 240 V, 50 Hz AC supply including making all connections complete all as specified and as directed.

S&F in repair sheet metal enclosure with distribution board SPN ,240 V ,4 ways Double door with suitable bus bar for provn for MCB's/Isolators, fixed to wall and making all connections all as directed

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S&F LED spot light fitting 20 W, integral driver 350 ° rotational with 90° angle adjustment complete with fitting accessories.

M&L for post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match with floors.

M&L for post construction Anti Termite Treatment of voids in masonry using chemical emulsion @ one litre per hole, at 300 mm intervals including drilling holes at 45 degree and repluggging them with cement mortar 1:2 to match the existing floors.

PRAGATHI BUILDERS

SM CONSTRUCTIONS