Providing design Constt and successful testing and commissioning of 0.10 MGD RSFP comprising of Clarifloculator flash mixer filter house separate back wash tank of required capacity along with all electrical mechanical components WSS Latroo

Amount

Earth work in excavation by manual means over areas (exceeding 30 cm in depth 1.5m in width as well as 10 Sqm on plan) incl. disposal of excavated earth upto 1.m from cutting edge disposed earth to be levelled & neatly dressed. in

All kinds of soil

Ordinary rock

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

All kinds of soil

Ordinary rock

Earth work in bulk excavation by mechnical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

All kinds of soil

Ordinary rock

Extra for every additional lift of 1.5 m or part thereof

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

150mm dia DI pipe

100mm dia DI pipe

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.

100 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)

50 mm dia. nominal bore

40 mm dia. nominal bore

25 mm dia. nominal bore

20 mm dia. nominal bore

15 mm dia. nominal bore

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.

150mm dia DI Pipe

100mm dia DI Pipe

P/F of MS flanges 10 mm thick to pipe line with necessary accessories, welding charges, laying, jointing , testing and commissioning of the pipe line complete job.including cost of pipes (RTQ)

65 mm dia GI

80 mm dia GI

Filling available excavated earth (excl. Rock) in trenches plinth sides of foundation etc in layers not exceeding 20cm in depth consolidating each layer by ramming & watering lead upto 50mtrs & lift upto 1.50 meter .

P/f of pipe specials incld. All carriages complete job.

150 mm dia sluice value ( Karloker / Vag)

100 mm dia sluice value ( Karloker / Vag)

80 mm dia gate value ( Karloker / Vag)

65 mm dia gate value ( Karloker / Vag)

150 mm dia bends/tees

100 mm dia bends/tees

80 mm dia bends/tees

150 mm dia double collors

100 mm dia double collors

P/F of DI sluice vlave confirming IS 780 read with upto date amendmnts standard make (Kirloskar/vag) meant for pipe gallery in filter beds required to be operated from operating plateform height 3.5m. Hence suitabe arangement for manual operations to be provided the job includes P/F and fabrication of MS 6mm thick tail pieces as per site requirements, nuts bolts and seals. the sluice valve should be fitted with extension rods, pedestrial etc (Filter beds inlet and oulet) complete 125 mm dia sluice value ( Karloker / Vag)

Providing / laying of stone soling dry hand packed

Providing & laying in position cement concrete in specified grade excluding the cost of centering & shuttering MS reinforcement 1:4:8 mix 1 cement 4 coarse sand 8 graded stone agg) 40mm stone agg.

Providing & laying in position cement concrete of specified grade exculding the cost of centering & shuttering all work upto plinth level.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm nominal size)

RCC work in walls (any thickness) incld attached pilasters butresses plinth and string cources fillets columns pillers piers abutments posts and struts etc upto floor v level excld cost of centering, shuttering finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

RCC work in beams suspended floors roofs having slope upto 15° landings, Balconies, shelves, Chajjas, Lantels , bends, plain window, sills, stair casses & spiral stair cases upto floor 5 level excld the cost of centering, shuttering , finishing & reinforcement 1:1.5:3 ( 1 cement: 1.5 corse sand : 3 graded crushed tone agg 20mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing & laying in position cement concrete in specified grade excluding the cost of centering & shuttering 1:2:4 mix (1 Cement 2 Course Sand : 4 graded stone agg) 20mm nominal size

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Columns, pillars, piers, abutments, posts and struts.

Stairs (excluding landings) except spiral staircases

Edges of slabs and breaks in floors and walls Under 20 cm wide

Arches, domes, vaults upto 6 m span

Extra for shuttering incircular work

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster of mix: 1 : 3 ( 1 cement : 3 fine sand)

Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position & binding all complete TMT Bars.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

P/F of GP sheets of width 0.30 mtr and 0.83 mm thick in joints as water seal

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

P/F hand rail of approved size by welding etc to stainless steel ladder railing, balcony and stair cases railing and similar work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.First Class kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover

Applying priming coat with ready mixed pink or grey primer of approved brand and mnufacture on wood work (hard and soft wood)

Painting with ready mixed synthetic enamel paint of approved brand and amnufacture in all shades to give an even shade (two or more coats on new work)

Providing/applying of white cement based putty of approved thickness 1mm of approvd brand and manufacture over the plastered surfaces to prepare the surface smooth and clean

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Makrana White Second quality

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

P/F of ms eves boarding made up of 30x30x4mm angle iron covered with 1mm thick MS sheeting incld painting with synthetic enemel paint over zinc oxide metal primer 200mm wide

P/F of glass panes 4mm thick with wooden fillets

P/L of filter media of approved quality from Ganderbal incld all leads lifts and carriages upto actual site of work complete job

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Supply/fixing of lighting conductor complete job

P/F of 80mm dia PVC under drainage laterls 8mm thick fabricated out of Korean form or Prince make with 9mm perforations as per design in the bed provided at 60 degree alongwith PVC tees and ends and end caps to be grouted in M-25 grade cement conc at ends. the pressure rating 10Kgs/CM²

Providing/installtion/testing and commissioning of double flanged MS pipes 6 mm thick complete job.

125 mm dia

80 mm dia

P/F of air blower (everest make or Kay make) capable for providing compressure at the rate of 30Cum/minute @ 0.35 Kg/CM² with suitable 3 phase induction motor with auxilary pipe system upto filter beds fitting pressure guaze nozels cement conc block base plate, air check valves, NRV, cement conc blocks in M-20 grade , foundation bolts base frame fabricated out of 100 MS channels. the job also includes PRV pipe and pipe fittings starters and PVC 19/18 copper wire complete job and other electrical controlling devices fitted on pannel board complete job.

Providing/installtion/testing and commissioning of Kirloskar make mono block pumping equipment capable of lifting 35 Cum/hour for a height of 20m with 3 phase appropriate rating power induction mover with starter assembly sucssion and delivery pipe fitting of required size upto back wash tank. the job includes all electrical operating devices fitted on pannel board

P/F of mechanical equipments required for Alum solution tank with electrically driven paddle assembly fitted with suiblae reduction gear mechanism coupled with 3 phase electric motor 1 Hp capacity ( Kirloskar/Crampton/Greves make) alongwith 40mm dia PVC pipe and pipe fittings upto point of application in the flash mixer along withwashout arrangements plus 25mm dia GI inlet water line from back wash supply to alum tank with GI pipe spls and gate valves ( B class pipe ) incld electrical operating devices fitted on pannel board complete job

P/F of mechanical equipment requred for bleach solution tank with electricalyy drive paddle assembly fillted with suitable rduction gear mechanism coupled with 3 phase electric motor 1 Hp capacity ( Kirloskar/Crampton/Greves make) alongwith 40mm dia PVC pipe and pipe fittings upto point of application in the flash mixer along withwashout arrangements plus 25mm dia GI inlet water line from back wash supply to alum tank with GI pipe spls and gate valves ( B class pipe ) incld electrical operating devices fitted on pannel board complete job

P/F of MS rotating bridge fabricated out of 50x50x6mm suitable for bearing silt load of clarifloculator (clearifier radius= 50m and floculation chamber radius = 25m) the job includes central bearing assembly shaft assembly MS wheels ostop wheel, and carriages with adequate rting prime mover 3 phase 440 v 50 Hz incld fly wheels + MS rail ISLC-100 on fish plate grountind on top base of clrifloculator in cement conc 6mm thick chequreds flooring over full span of bridge. the job includes P/Installation of 3 phase cubicla electrical pannel having capacity of 63 amp with one incoming feeder and one out going feeder incld of auxilary system fitted with appropriate rating 3 phase MCCB, OCB and MLI (L&T make) starters for operation of electrical motors and end carriage system. the job also includes connecting pole system and ppropriate guaze PVC copper wire complete job

Providing/installtion/testing and commissioning of flash mixer assembly suitable for a dia of 0.70m comprising of SS churners with vertical type hollow shaft prine mover 3 phase 15o RPM . The job includes constant blled assembly with reduction gear box and operational gear to regulate the bleed complete job

Providing/installtion/testing and commissioning of 3 phase oil emersed 30Kva voltage stablizer (Servo make) capable to operate incoming voltage 180 volts and outgoing voltage of 410 +- 10 degree volts complete job

P/L of 4 core 50mm alimunium cable to be laid as service line from nearest LT pole upto main pannel board incld to be laid underground

P/F of heating point in 2.5mm PVC copper wire

P/F of lighting points in 1.5mm PVC copper wire LED conical type of handles/syska make of 12 watt incld push buttons etc complete job

Providing/installtion/testing and commissioning of Philips/Havells make high mass security lights to be fitted insde filtration plant premises with high mass GI octagonal poles incld auto transformer, connectin cable and other accessories complete job

P/F of exhaust fan in the chemical house complete job (Havells, Usha. Crampton Greves make)

Providing necessary earthing for motor pannels lighting and heating networks as per prevailing electrical rules with latest amendments with necessary medium incld refilling complete job ( Electrode type)

P/L of shock proof 25mm thick rubber matting of Jyoti make

P/F of 50kva DG set Kirloskar green air cooled complete job

P/F of hume pipe 600mm dia with collar

Electrical sub station 100 kva incld poles and conductor other allied fittings and fixtures, channel nuts bolts incld LT and HT poles and conductor complete job

P/F of MS ventilator

12mm thick cement plaster in 1:6 mix (1 cement: 6 fine sand)

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.

Brick work with common burnt clay FPS (Non modular) bricks of class designation 75 in foundation and plinth in cement mortor 1:6 (1 cement:6 coarse sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

P/F of 1st quality ceramic glazed tiles confirming to IS 13753 of min 5mm of approved make like NITCO, Orient, Somany, Kajaria or equivalent make in all colour/shades except bergandy, bottle green, black of any size as approved by Er. incharge is skirting, risers of steps and dedos over 12mm thick bed of cement mortor 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.30 kgs/Sqm incld pointing in white cement mjixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

P/f salmen stainless steel kitchen sink. Size 610x510x200mm

P/f of PVC waste pipe of sink including PVC waste fitting complete ( Flexible 40mm dia)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Provision for plumbing and electrification and iron grills to windows of quarter RTQ

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Provision for Cost of nuts,bolts, etc.

Carraige of material from Different sources to nearest dumping site & incl loading, unloading & stacking by mechanical transport

150 mm dia pipe Avg. 40 km

Cement/steel avg lead 30kms

Cement/steel avg lead 45kms

Sand avg lead 35kms / Stone Agg. 20mm

40 mm stone Agg. Avg. 35 km

Sand avg lead 40kms

20 mm stone Agg. Avg. 30 km

40 mm stone agg. Avg. 30 km

Sand/20mm agg avg lead 45kms

stone soling avg lead 8kms

stone soling avg lead 30kms

stone soling avg lead 10kms

stone soling avg lead 21kms

stone soling avg lead 45kms

Bricks avg 40kms

Bricks avg 35kms

Extra carriage of materials by manual labour from dumping site to actual site of work

150 mm dia DI pipes Avg. 900 Mtrs

15 to 80 mm dia GI pipes Avg. 500 Mtrs

100 mm dia DI pipes Avg. 900 Mtrs

Cement/ Steel avg 100 mtrs

Sand/Agg avg 100 mtrs

40 mm dia Agg. Avg. 100 km

Stone/ soling avg 100 mtrs

Steel avg 100 mtrs

Bricks avg 100 Mts

Cement/ Steel avg 700 mtrs

Sand/Agg avg 700 mtrs

soling avg 700 mtrs

Cement/steel avg 400 mtrs

Sand/Agg avg 400 mtrs

40 mm dia Agg. Avg. 400 km

soling avg 700 mtrs

M/S GHULAM NABI MIR

MOHAMMAD IRFAN NAJAR

MANZOOR AHMAD DAR