PERIODICAL SERVICES TO MD AND OTM ACCN AND REPAIR TO JOINERY, PLASTERING AND CONNECTED B/R WORKS AT SANGRUR UNDER GE (S) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 RPM, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application.

M&L for applying acrylic thick wall care putty on internal/ external surfaces of walls/ ceilings/ soffits (thickness vary from1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.

M&L for applying two coats of oil bound distemper on walls, white or tinted applying over and including a coat of chalk whiting primer complete all as specified and directed. Note:- Oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make.

Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed Note: The above specification is guaranteed for 4 years Performance Warranty.

Note for Ser item No 2 to 6 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) as per format given in Annexure ‘A’ after Schedule 'A' Notes with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair with using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, ceiling and similar works incl provison of supports if reqd and dubbing with PCC (1 : 1.5 : 3) using 6 to 12 thick graded stone aggregate in any portion of 15mm to 50mm thick and finshing to desired shapes.(including Chicken Wire mesh) complete all as specified and as directed.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for Preparation of old decorated surfaces by washing, scrubbing down and applying two coats of oil bound distemper (of approved quality & tint) surface of wall using painting rollers, completed all as directed and secified. Note: Manufacturer's instruction is to be followed for prepration of surface.

M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil emulsion distemper on walls/ceiling complete all as specified and as directed.

M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying one coat of cement base paint @ 5 sq.m/kg/1 coat of cement based paint by roller complete all as specified and as directed.

M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat of cement based paint by roller complete all as specified and as directed.

M & L for preparation new plastered to walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller over a coat of priming coat complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparing existing treated surfaces on walls including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparing old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkat with shutters (without taking off shutter ) area exc. 1.5 sqm but n exc. 4 sqm each complete all as specified and directed.

Taking down door/window shutter/cupboard shutter with frame (without taking off shutters from the frame) area up to1.5 sqm each complete all as specified and directed.

Demolition of Brick walling, stone masonary built in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specifed and directed.

Dismantling of wall and ceiling board any thickness including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed..

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Refixing of shutter in the same opening not exc 1 sqm each complete all as specified and as directed.

Refixing of shutter in the same opening exc 1 sqm but not exc 2 sqm each complete all as specified and as directed.

Resecuring or easing and adjusting wooden / PVC shutters of any description exc 1 sqm and n exc 2 sq m each including taking down and refixing where ever required and fixing new screws complete all as specified and as directed.

M&L for Brick work with Fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed (as in manhole).

All as per Item no.34 but except brick complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement in external surfaces WPC shall be mixed complete all as specified and directed. NOTE-WPC Shall be measured and paid Separately

M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces with CM (1:6) finished even and fair without using extra cement in internal surfaces complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of suitable primer complete all as specified and as directed.

S&F for Pressed steel frames for doors with one or more rebates (Size of frame 125x60mm) including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, complete all as specified and directed.

S&F for Pressed steel frames for doors with one or more rebates (Size of frame 105x60mm) including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) as in filling to pressed steel frame of door complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick IInd class hard wood glazed and skelton door shutter divided into square, open rebated and prepared to receive glass/gauge etc (without sash barsi) edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass/gauge etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all as specified and as directed.

S&F for Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet re-inforced with M.S square tube, suppyling and fixing in opening as per specification and drg complete all as specified and directed..

S&F for factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for powder coated aluminum section for making frame and shutters of doors, windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading, rubber beading complete all as specified and as directed Note :- Glazing, ,hinges etc shall be measured and paid separately.

S&F Aluminium anodised DG 102 "DECO" grill of size 100mm x 10mm x7mm thick, approved design for windows / ventilators with and including F/U channel, complete all as specified and as directed.

S&F for 5.5mm thick sheet glass of ordinary quality and glazing fixed to aluminium shutters in square n.exc 0.5Sqm in each pane complete all as specified and as directed.

S&F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and as directed.

M&L for Hacking out old broken glass any thickness ,size ,quality and description from wooden frame ,steel frame with putty or fixed with beads complete all as specified and as directed.

S&F for 3 mm thick sheet glass of ordinary quality and glazing fixed with oil putty in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F for 4 mm thick Figured glass and glazing fixed with oil putty in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specifed and directed.

S&F for butt hinges medium weight cold rolled mild steel 75mm complete all as specifed and directed.

S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 100 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed.

S&F for 100 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed.

S&F for 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

S&F in repair for 20 mm dia chromium plated Stainless steel pipes for curtain rods including brackets(02 N0s for fixing), stops, roller complete all as specified and directed.

M&L for preparation of new steel surfaces of any description,over 10cm in width or girth, not otherwise describedand applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth, not otherwise describedand applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

S&F in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F 300mm ordinary mild steel rat tail rod patttern springs includding roller and roller plate complete all as specified and as directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete confirming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for Block boards, (18 to 19mm )grade 2 quality, interior grade, commercial type , fixed with screw to timber frame-work fixed in repair complete all as specified and as directed.

M&L for Prelaminated perticle board (18 to 19mm ) interior grade, commercial type,one side with decorative choice laminationand other side balancing white lamination fixed with screw to timber frame-work fixed in repair complete all as specified and as directed.

M&L for Veneered perticle board (18 to 19mm ) interior grade, Solid Core,general purpose type with Vace Veneers of type BB fixed with screw to timber frame-work fixed in repair complete all as specified and as directed.

S&F for Sold PVC wall Lining Consisting of 5mm thick plain colour PVC sheet in Strips & Channel feathered at the edge of fixing on solid PVC wall lining and solid PVC pertition inclusive of solvent cement and fixing at site complete all as specified and as directed.

S&F for PVC insulation pannels 10mm thick with EPS stuck to 1mm plain PVC sheet Suitable placed in False Ceiling/wall cladding including grid of Aluminium/GI/MS complete all as specified and as directed.

S&F in repair piano/continuous hinge of size 30 mm stainless steel complete all as specified and as directed.

S&F for frame work only for suspended false ceiling, GI exposed ceiling suspension system of grid size 600mm x 600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm. to form a grid of GI system duly suspended with 4mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc complete all as specified and as directed.

S&F for false ceiling of pre painted high pressure steam cured designer boards of size 595 mm x 595 mm x 4 mm thick fixed on GI snap grid, complete all as specified and as directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 2mm thick wall care putty filling complete all as specified and directed.

M&L Clean Sawn Timber framed and fixed in Second class Soft wood Scantlings as in Wall/Ceiling complete all as specified and as directed.

M&L 2nd class softwood not exc 3 Sq cm Plain Fillets, square, Rectangular or traingular in sec ,clean swan ,Secured with nails or brads complete all as specified and as directed.

M&L for plugging to walls complete for wood fillets ,grounds ,moulding ,boarding etc at a distance n. exc 1 m fixed in brick/pcc block masonry complete all as specified and as directed.

M&L for steel cup board shutter made out pressed steel frame of size 75mmx45mmx1.25mm thick with prressed steel shutter 01mm thick Godrej pattern fixed to masonry wall by hold fasts made out of 25x3mm flat iron including mild steel CP hanging rod of 20mm dia with brackets fixed on inner sie of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3 including spray painting with two coats of synthetic enemal paint over one coat of red oxide primer all around on steel surfaces of frame and shutter including taking down existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 all as specified and directed. 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete all as specified and as directed.

S&F in repair stainless steel plate racks, glossy finish, for kitchen overall size 800mm x 600mm x 250mm complete fixed in position as recommended by manufacturer with SS screws/fasners complete all as specified and as directed.

Notes: Applicable to (item No 02 to 84) 1. The items of Plastering/ Rendering, putty and further finishes (as applicable) shall be got executed in Stage wise manner (as mentioned below). After completion of every stage contractor will submit the stage passing certificate duly sign by all concerned as per format given in Appx ‘A’ after Schedule 'A' Notes. (a) Stage –I : Plastering / rendering. (b) Stage – II : Putty work. (c) Stage – III : First coat of finishes. (d) Stage- IV : Second coat of finishes. 2. Please note no further stage shall be executed till the certificate is submited to the GE.

NARINDER KUMAR SONS (BID ID -3406892)