GE(S) BTD 60 OF 2024-25 COMPREHENSIVE MAINT TO CERTAIN BLDGS OF JOCs OR QTRS IN ZONE M (JADUNATH ENCLAVE) UNDER AGE BR I UNDER GE(S) BATHINDA AT BATHINDA MILITARY STATION

Amount

Comprehensive maintenance for Carpentry work by attending day to day complaints of joinery related such as replacement of Builders hardware of doors, windows & cupboard and other Carpentry nature works like easing/re-securing & adjusting, without taking down shutter of door, windows and cupboards. Tightening of screws for tower bolt/Aldrop bolt/ stoppers, handle hinges in respect to Easing of door / windows/cupboards (Steel Wooden/Aluminium) of any description and size by cleaning, adjusting in position and making the same functional incl fittings (if reqd) with and incl greasing, oiling, screws/nales for fixing the fittings complete all as specified and directed.

Comprehensive maintenance to masonry work by attending day to day complaints of masonry related works such as plastering of wall/ceiling/chajja/making of jambs, soffit, cills etc of size not exceeding 0.25 sqm or on patch work including finishing with distemper/white wash/cement based paint/exterior emulsion paint including two coats of putty as required at site to match with existing surface.

Comprehensive maintenance to plumbing work by attending day to day complaints of plumbing nature like leaking bib taps, stop cock of any pattern or of any type including minor repairs to flush cistern, repair to PE-AL-PE composite pressure pipe/GI pipe leakages, removing air blockages if any and refixing old serviceable bib cocks, stop cocks any pattern after minor repairs such as replacement of washers, jumpers and spindle etc complete all as specified and directed. (any items like thread , Teflon tape, rubber washer, syphon kit, jumpers, brass spindles, caps etc shall be deemed to be included in the quoted rates).

Note for item No 1 to 3. The scope of work is of day to day maintenance nature/ requirement of works. Contractor shall attend the office of AGE B/R-I on daily basis and receive/ collect the complaints/ requirements of works and shall rectify the repair/maintenance works within time given below :- (a) Minor plumbing complaints - 48 hours (b) Minor Joinery complaints - 48 hours (c) Minor masonry complaints - 48 hours (d) Major Plumbing - 5 days (e) Major Joinery - 15 Days. If contractor fails to rectify the complaints with materials/ items to be replaced if required a penalty @ 50% of quoted rate by the contractors of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints within 48 hours. In the delayed case of a rectification of complaints even after 48 hours, he shall rectify the same within one week. (Note :- The complaint received from complaint cell shall have to be attended on same day).

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including necessary finishing of wall for fixing of frame complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Ditto all as per item above but of double shutter frame size 65 x 100mm

Ditto all as per item above but of double shutter frame size 65 x 125 mm

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing including and taking down old shutterand supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed and skeleton shutters of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter including taking down old shutter and supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fixed including with beads / fillets complete all as specified and directed.

Dismantling boarding any description fixed in any position with rails incl fillets

S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board designer laminate (OSL) of approved colour and finishing balancing (BSB) with density of 850 Kg/cu.m for frame and shutter for kitchen cabinets/Cupboards etc including self closing hinges and necessary fittings (such as handlesknob etc) dismantling of old boarding of any description complete all as specified and directed by Engg-in-charge. Note : Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates.

S & F for 4mm thick, sheet glass ordinary quality and glazing with oil putty or fixed in any type of frame (such as aluminium wooden mild steel) in square n. exc 0.5 sqm in each pane, including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed.

S & F for 3 mm thick, figured glass, pin head type and glazing with oil putty or fixed in any type of frame (such as aluminium wooden mild steel) in square n. exc 0.5 sqm in each pane, including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed.

M&L for running welding in repairs n. exc 6mm thick metal and n. exc 2.50 cm in length complete all as specified

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L brick work in cement mortar 1:6 with sub class `B' old size bricks straight or curved on plan exceeding 6.0m mean radius built complete all as specified and directed.

M&L half brick work in cement mortar (1:4) with sub class 'B' bricks, straight or curved on plan to any radius etc; complete all as specified and directed.

Taking down cement or cement lime plaster of any description from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed .

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement and applying wall care putty (1.5mm thick) in two layers on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint and two coat of acrylic emulsion distemper of approved tint over a coat of primer prepared surface by using Airless spray/Roller complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces and finishing even & fair but without using extra cement and applying wall care putty (1.5mm thick) in two layers on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & fair without using extra cement and applying three coats of white wash on newly plastered surfaces complete all as specified and directed.

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified

S & F in repair PVC valve less, symphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connection to flush pipe of any size and pattern complete all as specified

S&F vitreous china premium/1st quality wash basin, white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap/waste fitting (where as required) 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Hindware (WHB-Garnet (Cat No.- 10080), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or equivalent from Jaquar/Parryware/Cera as approved by AO

S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaquar (Cat No. VGP-81083K (Vintage Prime) & ALD 083) or equivalent from Cera (Valentina Single Lever Series) or equivalent as approved by AO

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Cat No. VGP-81053 (Vintage Prime)) or equivalent from Cera (Valentina Single Lever Series) or equivalent as approved by AO

S & F in repairs 15mm bore Pillar taps, cast copper alloy, chromium plated, fancy type with long screwed shanks and flynuts, screwed for iron pipe complete all as specified Make : Jaquar (Cat No. VGP-81001 (Vintage Prime)) or equivalent from Cera (Valentina Single Lever Series) or equivalent as approved by AO

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar (Cat No. VGP-81037) (Vintage Prime)) or equivalent from Cera (Valentina Single Lever Series) or equivalent from Hindware (Fluid Series) or equivalent as approved by AO

S & F in repairs 32/40mm size waste fittings, brass, CP, for glazed ware sinks, basins etc. with long flange end embedded in red lead cement and other end fixed all as specified

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality

S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S & F in repairs 32/40mm waste fittings for stainless steel sink (sink coupling), brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified.

S&F in repairs tank nipple suitable for HDPE water tank (minimum weight 20 mm - 45 gms) complete all as specified and directed .

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

S&F in repairs health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Jet spray CP, brass body with wall hook and 1 mtr SS pipe complete all as specified.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), for P trap white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc compete all as specified and as directed.

S&F three layers rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical top) hoisted and fixed in position 500 litre capacity including dismantling water tanks and removing to store 500 ltr. Capacity including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum), tank nipple and necessary other fittings complete all as specified and directed.

S & F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including all brass threaded fittings (such as elbow, nipple, socket etc) fixed complete outer diameter of pipes 20 mm including necessary cuttingng,chases in wall & ceiling and taking down or up of any description tubing and connection for refixing or removal complete all as specified and directed.

S & F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including all brass threaded fittings (such as elbow, nipple, socket etc) fixed complete outer diameter of pipes 25 mm including necessary cuttingng,chases in wall & ceiling and taking down or up of any description tubing and connection for refixing or removal complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises all as specified

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square marbonite double charged vitrified tiles in 600x600x 9 to 10 mm thick in floors etc. in approved shade, set & jointed including laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to national BIS, SP : 7 pointed in grout material and using spacer complete all as specified and directed.

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square marbonite double charged vitrified tiles in 600x600x 9 to 10 mm thick in approved shade, set & jointed in neat and pointed in white or coloured cement to match, as in skirting not 150mm high etc. in any pattern of light or dark tiles as approved, including laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to national BIS, SP : 7 pointed in grout material and using spacer complete all as specified and directed.

Providing and Laying Premium (1st) quality straight edge, plain square vitrified tiles with mohs hardness greater than 7, Flexural Strength more than 35N/mm2, braking strength greater than 1700N and density should be minimum 2.2 Grms/cc in 400x400x10 mm thick / area of each tile exc. 0.12sqm but not exc. 0.18 sqmtr in floors etc. in approved shade/combination of light & dark and sheen finish, set & jointed including laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to national BIS, SP : 7 pointed in grout material and using spacer complete all as specified and directed.

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 450mmx300mm/600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed including laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to national BIS, SP : 7 pointed in grout material and using spacer complete all as specified and directed. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set & jointed including laid with approved High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in walls/floor conforms to national BIS, SP : 7 pointed in grout material and using spacer complete all as specified and directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) Cleaning of RCC surface to remove dust , loose particles etc with compressed air or any other suitable technique depending on site conditions grinding any sharp edges etc complete all as specified and as directed by engr-in-charge. (b) Supply and apply a glass fibre reinforced modified cementitious coating system (i) Base Coat : HS LATEX plus ( Consumption base coat 0.30kg/Sqm) (ii) Reinforcement : Glass Fibre (iii) Second And Third Coat : HS Latex Shield 2K (consumption Qty 3 Kg/Sqm) System Requirement : density 2.00kg/ltr abd Compressive Strength : 0.5N/mm2 (c) M&L rendering 15 mm thick in cement plaster (1:4) using coarse sand mixed admixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces. (d). 40 mm dia HDPE pipe to be provided as spout pipe in sunken portion. Note:- sunken portion will be fill only with AAC blocks as per manufacturers instructions,, HS Power Plasticizer (Consumption :0.10 kg per Bag of Cement )

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) over 10 mm thick screed in CM 1:4 as in cooking platforms steps, jambs, pillars, window- cills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), making hole for gas pipe and including demolition of stone slab/tiles complete all as specified and directed.

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required shall be deemed to be included in the quoted rates), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (rates of repair/replacement of tiles in floor/wall shall be included in the quoted rates by the contractor). If leakage again found during the currency period of contract at the repaired location, contractor shall repair again without any extra cost in terms of condition 46 of IAFW-2249 of General condtion of contracts. complete all as specified

FAQIR CHAND (BID ID -3192598)

M/s Kamal Builders (BID ID -3192473)

KULWANT RAI (BID ID -3192464)

BALAJI CONSTRUCTIONS (BID ID -3192606)

RINKU BROTHERS (BID ID -3192633)

ANANT ENTERPRISES (BID ID -3198261)

M J BUILDERS (BID ID -3192478)

KARTIK BUILDERS (BID ID -3198056)

SAHIL CONSTRUCTIONS (BID ID -3192545)