REPAIR REPLACEMENT OF PATH HARDSTANDING UNDER AOR OF AGE BR DETT III OF GE 862 EWS

Amount

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil, for foundation, etc, or for shafts, wells, drain pipes n.exc 10 Sqm on plan and getting out, complete, all as specified and directed.

Removing excavated material ,not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting poin, complete all as specified and directed.

M&L for plain Pre-cast Cement Concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) block masonry with solid blocks, exc 10cm in width and setting in CM 1:6, complete all as specified and directed.

M&L for Plain Cement Concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in coping including necessary foam work, if required, complete all as specified and directed.

M&L for pre-cast RCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) cover slabs for manhole slabs (for manholes etc) chullah hoods, chajjas, water toughs, mangers, shelves and similar articles with plain faces set in CM (1:6) & including demolition, complete all as specified and directed.

M&L for mild steel TMT bars 6-8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15cm thickness, including removal of debris/ concrete from site complete all as specified and directed.

M&L for 75mm thick Plain Cement Concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub base of path, hard standing and footpath, finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L for coloured, pre-polished, premium quality factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 40mm thick, M-30 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern as directed as in hardstanding,with grey cement, laid tightly over & including 50mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete all as specified and directed.

M&L for prepolished coloured chequered cement concrete tiles of approved quality of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for 100mm thick Plain Cement Concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub base of floor, paving etc, finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L for coloured, pre-polished, factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 60mm thick, M-35 grade, single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern, as in footpath, parks, lawns, drive ways or light traffic parking etc, with grey cement, laid tightly over & including 50mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete all as specified and directed.

M&L for coloured, pre-polished, factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 80mm thick, M-30 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern as directed as in footpath, parks, lawns, drive ways or light traffic parking etc, with grey cement, laid tightly over & including 50mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointied with cement mortor 1:3 (1 cement 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever requied, complete all as specified and directed.

M&L for Plain Cement Concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) providing roof kerbs or mud stops, leveling course, pedding rounded or chamfered on edges including demolition of existing, complete all as specified and directed.

M&L for preparation of newly surfaces of brick, stone, concrete, asbestos cement or plaster surfaces of any description over, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer, competel all as specified and directed.

Demolition of cement concrete (unreinforced) of any description & in any portion not otherwise specifically provided for & removal of demolition material to out side from site complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in surface channel and drains including necessary form work, complete all as specified and directed.

M/s Anil Engineers & Builders (BID ID -3332699)

M/S Ramesh Chander Gandotra & Sons (BID ID -3336755)