Repair replacement of floor wall tiles kitchen cupboards structural repair wood door windows and certain BR works at NOFRA I under AGE BR II area in GE Gomantak Vasco

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick (average) Cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in sub base of floor etc. complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness(below or above ground level) complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L Vitrified Ceramic tiles 9 to 10 mm thick light shade (also in patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L joint free Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 20 mm thick screeding in CM 1:4 complete all as specified

M&L glazed ceramic coloured tiles 350 x 250 x 6 to 7 mm or 450 x 350 x 6 to 7 mm thick on vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for granite stone 20 mm thick (of any type) glazed (table rubbed and polished) fixed as in steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded and providing screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

S&F Powder coated (minimum 50micron) aluminium door/ window/ ventilators shutter and frame, any type sliding or openable & other similar work etc. fabricated by using the approved standard section including necessary arrangements to receive 4 mm thick glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket/rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed. Note :- (i) Weight of aluminium section shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements. (ii) Glass and wire mesh will be measured and paid seperately.

S&F Sheet glass 4mm thickness, ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins or rubber beddings/gasket around glass panes complete all as specified and directed.

S&F figured glass, 3 mm thick, pin head type and fixing with wooden beads or oil putty and provsion of glazing pins or rubber beddings/gasket around glass panes in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed

M&L mild steel work as hold fasts and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling in hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

S&F second class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete all as specified and directed.

S&F 2nd class HW 35 mm thick Plain framed, panelled shutter (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

M&L for 2nd class hard wood glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into square, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b); supplied and fitted to chowkhats complete all as specified and directed.

S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100 mm long (ISI marked) complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed.

S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked) complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails or with screws complete all as specified and directed.

S&F 18 mm thick celuka PVC sheet minimum 600 KLgbm density grade-I quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom inside the cabinet including drawer channels two No. in each drawer, magnetic ball catcher and all other fittings complete all as specified and directed. Note:- (i) Quoted rates shall deem to include fixing of cabinet on wall with appropriate rawl plug/dash through fastner type). (ii) Fabrication and installation of cabinet to be carried out by authorized vender of manufacturer only.

S&F 12 mm thick celuka PVC sheet minimum 600 KLgbm density grade-I quality of both side plain white colour regidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet shutters, sides, top and bottom inside the cabinet including drawer channels two No. in each drawer, magnetic ball catcher and all other fittings complete all as specified and directed. Note:- (i) Quoted rates shall deem to include fixing of cabinet on wall with appropriate rawl plug/dash through fastner type). (ii) Fabrication and installation of cabinet to be carried out by authorized vender of manufacturer only.

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Providing and applying 20 mm thick ready mix external sand faced cement plaster having minimum composition of C:S (1:4) using fully treated dry, well graded sand conforming to IS 383 with neat cement rendering at all locations and height in two coats on masonry and concrete surfaces with and including water proofing compound to the first coat of plaster as per manufacturers specification, finishing, curing, scaffolding etc complete all as specified & directed. Make : Asian paint/ ACC/ JK Cement/Ultratech

Dismantling of loose portion of concrete from ceiling and S&F of wiremesh of weight 2.5 Kg/Sqm and applying 25 mm average thickness in CM(1:4) mixed with and including liquid WPC (complast 'X' as recommended by the manufacturer with guniting machine at a pressure not less than 5 kg/sqm finally rendering 10 mm thick plaster in CM (1:4) mixed with and including Liquid WPC (Complast 'X' 421 from M/s Fosroc and nitobound AR from M/S Fosroc or equivalent as approved by GE ) in the proportion recommended by the manufacturer complete all as specified and directed.

Providing and applying 12 mm thick ready mix internal plaster at all heights and locations in single coat on masonry and concrete surfaces including finishing, curing, scaffolding etc complete all as specified & directed. Make : Asian paint/ ACC/ JK Cement/Ultratech

Providing and applying 5 mm thick ready mix internal plaster at all heights and locations in single coat on ceiling including finishing, curing, scaffolding etc complete all as specified & directed. Make : Asian paint/ ACC/ JK Cement/Ultratech

M&L cutting out cracks to V section not exc. 5 mm in existing roof/wall by using machine, cleaning off the dust, dirt etc. for ease of application, washing with water and applying crack filler, Dr Fixit crack-X Paste/Dr Fixit crack X powder or equivalent with the aid of a putty blade all as per manufacturer's instructions and making good surfaces all as directed.

M&L for apply a coat of SmartCare Primero with dilution ratio of 1:1 with water maintain a coverage of 100 sq.ft/ltr cleaning off the dust, dirt etc. and filling cracks with smart crack filler complete all as specified & directed.

M&L for preperation of new surface wall/ceilling and applying two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane complete all as specified and directed.

M&L for applying one coat of alkali resistant primer on plastered surfaces over 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation of new wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying one coat of primer over 3mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation of surfaces complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and directed

M&L for Cutting chases, pinning in. making good to facings where required for stone concrete block or slab/ walls and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth complete all as specified and directed.

Supply, fixing, laying & testing CPVC pipes 20 mm SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair 15 mm nominal bore Bib taps, long body fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Viterous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC bath cabinet/ mirror cabinet (multi utility) with 4mm thick looking mirror of overall size 560x410mm complete all as specified and directed. Make: Commander/ Polytuff/ Prayag

S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets complete all as specified and directed

S&F Health faucet brass chromium plated suitable for 15 mm dia pipe with 1 metre long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified. Make:- Jaquar/ Parryware/Prayag

S&F in repair 1 mm thick stainless steel plate rack over all size 0.90 x 0.90 x 0.25 m of standard pattern and make as approved by GE complete all as directed. Make: Diamond/Nirali/Bluestar/Jayna/Neelkanth

M&L for preparation of old painted steel, surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.

SACHIN CONSTRUCTIONS (BID ID -3128940)

M/s Gayatri Contruction Co. (BID ID -3129490)

CVS CONSTRUCTIONS (BID ID -3129042)

SHIVRAJ CONSTRUCTIONS (BID ID -3129869)

STAR FABRICATION (BID ID -3129841)

M/S. NAVEEN ENGINEERING & CO (BID ID -3129145)

Super Construction (BID ID -3128858)