Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC | ₹31.4 L Quoted ₹31.6 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹31.8 L+₹10,600 (0.33%)Rejected-Finance | ₹31.8 L+₹10,600 (0.33%) | L2 | Rejected-Finance OTHER THAN LOWEST |
| 3 | L3₹33.1 L+₹1.5 L (4.68%)Rejected-Finance | ₹33.1 L+₹1.5 L (4.68%) | L3 | Rejected-Finance OTHER THAN LOWEST |
| 4 | L4₹34.7 L+₹3.0 L (9.50%)Rejected-Finance | ₹34.7 L+₹3.0 L (9.50%) | L4 | Rejected-Finance OTHER THAN LOWEST |
| 5 | L5₹36.3 L+₹4.6 L (14.7%)Rejected-Finance 53 SHANTI S SANIK COLONY BAIRAGARH BHOPAL MP 462 030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | ₹36.3 L+₹4.6 L (14.7%) | L5 | Rejected-Finance OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | M/S AJAY JAIN L1 | M/S Shanti Enterprises L5 | JYOTI ENTERPRISES L3 | M/S Shanti Traders L4 | PADAMSHRI CONSTRUCTION CO L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline (iii) Contractor will deposit the 50% quantity exterior weather coat paint with original purchase voucher, manufacturers test certificate required for the work within fifteen days from the date of commencement of the work. The paint will be issued to the contractor as and when required for carrying out the work at site which will be signed by contractor or his rep and Engr-in-Charge. (iv) Mixing of oil bound distemper, exterior/interior emulsion paints etc shall be carried out with mechanical mixer/stirers. (v) Surface shall be allowed to dry completely before application of any paint. Wet or newly plastered surfaces with visible moisture shall not be painted till it is dry. (vi) Paint application with spraying machine having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface for painting of subsequent coats. (vii) The rate quoted against BOQ are including necessary scafolding expences upto triple storey buildings. | ||||||||
| 1.10 | M&L for complete removal of existing treatment on wall (internal/external)/ chajja/ roof projections including facias, cornices etc by scrapping with sanding pad, wire bruss of appropriate grit to make surface clean, free from dust, loose paint etc and external surface by washing/cleaning down with water including filling holes, cracks, depressions of scraped surfaces with putty and preparation of surfaces for further treatment. Necessary scaffolding for suitable height upto 10.00 mtr from average ground level shall be included in quoted rate complete all as specified and directed. | 26,000 | Sqm | 10 ₹2,60,000 | 15 ₹3,90,000 | 15 ₹3,90,000 | 6 ₹1,56,000 Lowest | 9 ₹2,34,000 |
| 2.00 | M&L for one coat of acrylic water based interior/exterior grade primer as per manufacturer instruction applied with fully automatic airless spray machine and allow to dry the surface 6-8hrs complete all as specified and directed. | 26,000 | Sqm | 16 ₹4,16,000 Lowest | 25 ₹6,50,000 | 20 ₹5,20,000 | 23 ₹5,98,000 | 19 ₹4,94,000 |
| 3.00 | M&L for dampness rectification on wall area:-
Surface Preparation:-
Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level, filling of crack by fill paste in visible cracks and apply two coats of DAMP STOP ELASTO over finished surface. Necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and directed. | 1,000 | Sqm | 40 ₹40,000 Lowest | 140 ₹1,40,000 | 250 ₹2,50,000 | 130 ₹1,30,000 | 190 ₹1,90,000 |
| 4.00 | M&L for preparation of old surfaces and apply one coat of oil bound distemper emulsion with fully automatic airless spray machine complete all as specified and directed. | 2,610 | Sqm | 16 ₹41,760 Lowest | 25 ₹65,250 | 30 ₹78,300 | 22 ₹57,420 | 21 ₹54,810 |
| 5.00 | All as per item No. 4.00 here-in-before but for two coats of oil bound distemper emulsion. | 600 | Sqm | 40 ₹24,000 | 40 ₹24,000 | 40 ₹24,000 | 30 ₹18,000 | 25 ₹15,000 Lowest |
| 6.00 | M&L for providing and applying minimum 1mm thick wall care putty (where it is required) over prepared surfaces to achive the surface even and smooth for further application of finishes complete all as specified and directed. | 2,050 | Sqm | 30 ₹61,500 | 25 ₹51,250 | 35 ₹71,750 | 30 ₹61,500 | 19 ₹38,950 Lowest |
| 7.00 | M&L for one coat of exterior weather proof emulsion over on damp proof surface of wall including chajja, patta etc. as per manufacturer instruction complete all as specified and directed. | 1,000 | Sqm | 30 ₹30,000 Lowest | 40 ₹40,000 | 55 ₹55,000 | 50 ₹50,000 | 43 ₹43,000 |
| 8.00 | M&L for applying two coats exterior weather proof emulsion paint of 100% premium acrylic emulsion paint on old prepared wall surfaces including chajja, patta etc. having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, water, alkali and fungal resistance, dirt resistance of required shade with silicon additives as per manufacturer instruction and necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and directed.
Make:- Apex ultima of Asian paint or equivalent of Berger long life 10, Dulux weather shieldas approved by GE. | 25,000 | Sqm | 60 ₹15,00,000 | 60 ₹15,00,000 | 50 ₹12,50,000 Lowest | 68 ₹17,00,000 | 54 ₹13,50,000 |
| 9.00 | M&L for vitrified ceramic tile light shade 7-8 mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors/skirting over and including 20mm thick screed bed in CM 1:6 etc and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. | 120 | Sqm | 800 ₹96,000 | 650 ₹78,000 Lowest | 700 ₹84,000 | 1,020 ₹1,22,400 | 650 ₹78,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Jul 2025, 6:00 pmClosed
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
PERIODICALS AND CERTAIN EXTERNAL REPAIRS TO THE BLDG IN MH AREA AT BAIRAGARH UNDER GE BHOPAL
2025_MES_717600_1
8410/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹90,000
Yes
26 Sept 2025
30 Jun 2025
28 Jul 2025
30 Jun 2025
26 Jul 2025
14 Jul 2025
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline (iii) Contractor will deposit the 50% quantity exterior weather coat paint with original purchase voucher, manufacturers test certificate required for the work within fifteen days from the date of commencement of the work. The paint will be issued to the contractor as and when required for carrying out the work at site which will be signed by contractor or his rep and Engr-in-Charge. (iv) Mixing of oil bound distemper, exterior/interior emulsion paints etc shall be carried out with mechanical mixer/stirers. (v) Surface shall be allowed to dry completely before application of any paint. Wet or newly plastered surfaces with visible moisture shall not be painted till it is dry. (vi) Paint application with spraying machine having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface for painting of subsequent coats. (vii) The rate quoted against BOQ are including necessary scafolding expences upto triple storey buildings.
M&L for complete removal of existing treatment on wall (internal/external)/ chajja/ roof projections including facias, cornices etc by scrapping with sanding pad, wire bruss of appropriate grit to make surface clean, free from dust, loose paint etc and external surface by washing/cleaning down with water including filling holes, cracks, depressions of scraped surfaces with putty and preparation of surfaces for further treatment. Necessary scaffolding for suitable height upto 10.00 mtr from average ground level shall be included in quoted rate complete all as specified and directed.
M&L for one coat of acrylic water based interior/exterior grade primer as per manufacturer instruction applied with fully automatic airless spray machine and allow to dry the surface 6-8hrs complete all as specified and directed.
M&L for dampness rectification on wall area:- Surface Preparation:- Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level, filling of crack by fill paste in visible cracks and apply two coats of DAMP STOP ELASTO over finished surface. Necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and directed.
M&L for preparation of old surfaces and apply one coat of oil bound distemper emulsion with fully automatic airless spray machine complete all as specified and directed.
All as per item No. 4.00 here-in-before but for two coats of oil bound distemper emulsion.
M&L for providing and applying minimum 1mm thick wall care putty (where it is required) over prepared surfaces to achive the surface even and smooth for further application of finishes complete all as specified and directed.
M&L for one coat of exterior weather proof emulsion over on damp proof surface of wall including chajja, patta etc. as per manufacturer instruction complete all as specified and directed.
M&L for applying two coats exterior weather proof emulsion paint of 100% premium acrylic emulsion paint on old prepared wall surfaces including chajja, patta etc. having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, water, alkali and fungal resistance, dirt resistance of required shade with silicon additives as per manufacturer instruction and necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and directed. Make:- Apex ultima of Asian paint or equivalent of Berger long life 10, Dulux weather shieldas approved by GE.
M&L for vitrified ceramic tile light shade 7-8 mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors/skirting over and including 20mm thick screed bed in CM 1:6 etc and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.
M&L for vitrified ceramic tile light shade 8-10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm on vertical surfaces such as skirting dado and risers to steps etc over and including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.
M&L for galvanised cold rolled steel section frame work size 600x600 grid size 24x38x0.50 (composite thickness) tee (bottom pre-coated) and size 24x24x0.50m (composite thickness) thick wall angle, galvanised cold rolled steel section including suspenders as per (Gapsec) manufacturs insturction as in ceiling including dismantling of ceiling, cover fillets etc. complete all as specified and directed.
M&L for asbestos free calcium silicate board of size 600x600x6mm thick fixed to steel frame work as in ceiling including applying two coats of oil bound distemper complete all as specified and directed.
Taking down aluminium doors n.exe 4 sqm each and refixing in same position after carry out necessary repairs including replacing rubber/ aluminium beading and jointing cleats, tightening if required including making good existing surface complete all as specified and directed. Note :- Any aluminium style, rail, frame, floor spring, hydrulic door closer if required to be replaced will be measured and paid seperately under respecective items.
M&L for metalic ceiling T 24 plain/corrugated /semi corrugated powder coated duly interlocked as in false ceiling board of width 100mm/150mm of 0.5 to 0.7 mm thick, fixed to steel frame work as in ceiling, including dismantling complete all as specified and directed.
All as per item No. 14.00 here-in-before but refixing only from old material retrieved.
S&F in repairs 15 mm pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15 mm bore bib taps, long body, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.
S&F in repairs 15mm dia brass, chrominium plated, wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15mm dia brass CP centre hole basin mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125mm in size with or without swivel joints any size incluidng fixing to steel pipe or union complete all as spfecified and directed.
S&F of 15mm stop valves/angle valve, cast copper alloy, chromium plated screwed down high pressure, with crutch or butterfly handle, scrwed both ends for iron pipe or for unions and fixing complete all as specified and directed.
S&F in repairs 15mm bore, stop cock, cast copper alloy chromium plated with long shank and cup (concealed type) screwed down, screwd for iron pipe or union and fixed in repairs complete all as specified and directed.
S&F in repairs china wash down water closet pan (Pedestal Pattern), white, pedestal pan and 'P' or 'S' trap, plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs vitreous china wash basin, white, flat back, size 630x450mm including brackets, waste pipe, coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed.
S&F in repairs PVC low level flushing cistern 10 ltrs capacity with all internal fittings including 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads and washers with connections fixed in repairs complete all as specified and directed.
S&F in repairs health faucets CP with 1.2mtr long CP flexible pipe complete all as specified and directed.
S&F in repairs jet spray (butterfly) with 1.0 mtr long tube complete all as specified and directed.
S&F in repairs toilet paper holder of mild steel, chromium plated 'D' type, fixed to walls with chromium plated brass screws complete all as specified and directed.
S&F in repairs EWC seat cover white/coloured plastic with fixing bolts and hinging device, ISI marked, complete all as specified and directed.
Taking down chowkhats or frame with shutter exc 1.5 sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
M&L for fabricating and fixing powder coated (minimum 50 miciron) aluminium sections of required size for doors, windows any type, frames and partitions including aluminium hinges of required size jointing cleats, screws salsh fasterners, plug for fixing with walls, column etc including taking down damage portion of damage door, windows or taking down complete door/window complete all as specified and directed. Note:- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges etc.
S&F of 4.80 mm thick, plain glass and glazing with putty /uPVC beading including rubber packing, fixing glass to uPVC surrounds complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 22600.00
PADAMSHRI CONSTRUCTION CO (BID ID -3363881)
JYOTI ENTERPRISES (BID ID -3372481)
M/S Shanti Traders (BID ID -3372673)
M/S Shanti Enterprises (BID ID -3364372)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .