Providing Construction of Cyber Forensic Lab at Sri Vijaya Puram under PBND. SW Providing 82.5 KVA genset for the building

Supplying, installation, testing and comissioning of "KIRLOSKAR" make 4R1190ETA4G1 Model, 105hp @ 1500rpm, 4 cylinder, vertical, water, cooled, diesel oil engine, directly coupled with "KIRLOSKAR GREEN" make AC alternator, 3 phase, 415v, 50Hz @ 0.8pf, self excited, self regulated ddesign to run at 1500rpm, 66kW/82.5kVA DG set with acuostic enclosure (sound proof) as per CPCB-IV+ approved DG. Make: Kirloskar, Cummins, Ashok Leyland or equivalent.

Designing, Supply, Installation , Testing and Commissioning of Automatic Mains Failure panel for 82.5 KVA capacity Genset of suitable size with following technical specification. 1) Electricity board supply loading/Unloading in Off/Manual/ Auto mode. 2) Selectable Auto/Manual Start/Stop of the generator. 3) Selectable Auto/Manual loading/unloading of the generator. 4 Interlocking loops with solid state logic circuit to avoid shorting of EB supply side and generate supply side, 5) Short circuit protection system for both EB side and generator side. 6) Over load Protection system for generator. 7) Single phase prevention system. 8) Phase sequence sensing system. 9)Time sensing system for all operation. 10) Digital monitoring system for voltage, amps, and frequency. 11) Short circuit protection for DC Circuit 12) By Pass Arrangements. Make:OEM.

Supply, installation, testing, and commissioning of LT outdoor-type feeder pillar box, floor-mounted, fabricated from 16-gauge CRCA sheet with MS angle framework (40×40×4 mm & 25×25×3 mm), powder-coated (min. 60 micron), weatherproof and vermin-proof, mounted on 600 mm high MS pedestal (total height 1600 mm), grouted on 1:3:6 RCC pedestal. Features: - Dimensions: 1000 mm (W) × 500 mm (D) × 1000 mm (H) - Double-leaf front and rear doors with concealed hinges, lockable handles, rubber gaskets - Sloped top cover for rainwater drainage - Internal compartments for utility and DG cable terminations - Tinned copper busbars (min. 320A), RYB & Neutral, on DMC/SMC supports - Metering section with provision for EB meter, CTs, MCB/Isolator - Removable gland plates with clamping for 1 No. 3.5C × 120 sq.mm XLPE Al. cable (utility) and 1 No. 3.5C × 95 sq.mm (DG) - Earth busbar: 25×3 mm GI strip with terminals - Internal wiring with copper conductors, lugs, ferrules - Nameplate, danger signage, and component labeling - Painting: 1 coat red oxide primer + 2 coats enamel finish - Installation as per CPWD specifications and Engineer-in-Charge direction

Providing and fixing following capacity KITKAT fuse unit with busbar link, 240V-50Hz and ISI marked including making connections, etc. as required. Make: Anchor or equivalent. 320A

3.5 core, 95 sqmm

3.5 core, 120 sq mm

Above 95 sq. mm and upto 185 sq. mm