Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹69.4 LAdmitted-Finance CPWD | CENTRAL | DELHI | 110007 | -25.32% | ₹69.4 L | L1 | Admitted-Finance |
| 2 | L2₹76.3 L+₹6.8 L (9.80%)Admitted-Finance CPWD | NEW DELHI | DELHI | 110001 | -18.00% | ₹76.3 L+₹6.8 L (9.80%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical BHU | - | - | - | Rejected-Technical Not fullfill our requriment |
Tender Value
₹93.0 L
EMD Value
₹1.9 L
Closing Date
27 Jun 2026, 5:00 pmClosed
PROFESSOR IN-CHARGE
University Works Department Banaras Hindu University Varanasi
Providing 8 Nos. Parking Facility for the 7 Hostels (Vindhyachal, Vindhyawasini, Himadri, Nilgiri, Shivalik, Arawali and Kailash) at RGSC, Barkachha, BHU
2026_BHU_914026_1
UWD/2026/22062026-1
Open Tender
Civil Works
Works
120 days
UWD BHU
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
Registrar, Banaras Hindu University
₹1.9 L
21 Jul 2026
20 Jun 2026
30 Jun 2026
20 Jun 2026
27 Jun 2026
20 Jun 2026
20 Jun 2026 - 23 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0 | Civil Work | - | - | - | - |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. : All kinds of soil. (2.8.1) | 220.5 | sqm | 253.27 | ₹55,846.04 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (4.1.10) | 231 | cum | 6,342.6 | ₹14,65,140.6 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (4.1.3) | 219.5 | cum | 7,665.78 | ₹16,82,638.71 |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. (2.25) | 414 | cum | 190.71 | ₹78,953.94 |
| 5 | Carriage of Earth up to 2 KM (1.1.2) | 240 | cum | 239.18 | ₹57,403.2 |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (10.2) | 16,322 | Kg | 130.09 | ₹21,23,328.98 |
| 7 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (12.50) | 1,780 | sqm | 718.71 | ₹12,79,303.8 |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). (13.111.2) | 475 | sqm | 78.47 | ₹37,273.25 |
| 9 | Factory made 50mmx47mm with a wall thickness of 5mm door frame PVC extruded sheet i/c carriage
Two or more coats on new work (13.61.1) | 583 | sqm | 151.69 | ₹88,435.27 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Bid_Document01.pdf
Tender Documents • 1.98 MB
BOQ_960561.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .