ADDN/ ALTN TO P-02 IN MG ENCLAVE AND ADDN/ ALTN TO COMPOUND WALL OFFICERS TRANSIT ACCN AND SPL REPAIR TO ROOF TREATMENT AT MGS ENCL AND HALDIGHATI LINES UNDER GE (S) JAIPUR

Amount

Job No : 35/MIN/61SA/Q3W/2023-24 M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

M&L 75 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and fair without using extra cement as in plinth protection

Dismantling of floor /skirting ( terrazzo/ PCC / Ceramic Tiles) including cement mortar bedding (but not backing ) and removing the rubbish from the site.

M&L glazed ceramic tiles in vertical surface 300x600x7 mm / 450x350x7 mm thick set and including 10mm thick layer of screed bed in CM 1:4 on verticle surfaces and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as on verticle surfaces as skirting and dado etc,complete all as specified and directed.

M&L coloured Non skid ceramic tiles 7 to 8 mm thick square/rectangular) area of Each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over 15 mm thick screed bed in CM(1:4) completed all as specified

M&L hardcore gauge 40 to 80mm,deposited, spread ,and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified.

M&L preparing new plastered surfaces including scrapping and applying two coat of oil emulsion distemper all as specified and directed.

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level )

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate complete all as specified and as directed.

S&F powder coated (min thickness of 50 microns) aluminimum anodised frame fixed type with aluminum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws etc complete all as specified and directed.

S&F powder coated (min thickness of 50 microns) aluminimum anodised door/window shutter openable / sliding type with aluminimum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws handle tower bolt etc complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. 35/MIN/61SA/Q3W/2023-24 - 3.5 09/REV/61/SA/Q3W/2023-24 - 56.5

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. 35/MIN/61SA/Q3W/2023-24 - 6.5 09/REV/61/SA/Q3W/2023-24 - 56.5

Excavation in trenches not exc.1.5 m wide and not exc.1.5 m in depth for foundation or for shafts, wells, manholes etc not exc 10 Sqm on plan and getting out in soft/ loose type of soil complete all as specified and as directed. 35/MIN/61SA/Q3W/2023-24 - 8.5 09/REV/61/SA/Q3W/2023-24 - 18.5

Removal of excavated soil to a distancen exc. 50m and depositing where directed complete all as specified and as directed. 35/MIN/61SA/Q3W/2023-24 - 3.5 09/REV/61/SA/Q3W/2023-24 - 7.5

Returning,filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed. 35/MIN/61SA/Q3W/2023-24 - 5.00 09/REV/61/SA/Q3W/2023-24 - 11.00

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or including induction butt welded tubes conforming 1161-1979 grade st 240, Fe-410-W (Gde- E 250) Quality A complete all as specified and as directed.

S&F Pre Painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of an colour having tensil strength of 550Mpa as in roof covering with screws complete all as specified and as directed.

S&F Aluminium snap grid frame work of grid size 605 x 605mm for false ceilling all as specified complete all as specified and as directed.

M&L for Exposed metal frame ceilling with calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid incl all accessories as required complete all as specified and as directed.

M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed.

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of sizes 15 mm bore complete all as specified and as directed.

S&F for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of sizes 20 mm bore complete all as specified and as directed.

S&F for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of sizes 25 mm bore

S&F sink made of stainless steel 1.0 mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) 16 to 18mm thick in risers & treads of steps, jambs, pillars, window cills,cooking platforms and similar works over & including 20mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) complete all as specified and as directed.

M&L of 19 mm thick Prelaminated particle board, interior grade, prelaminated both side with deocrative choice lamination , fixed with screws to timber frame work complete all as specified and as directed.

S&F of brass handle of 100 mm size type polished bright

M&L Auto close hinge 100 mm long of brass with CP finish for Kitchen Cabinet and Almirah shutter etc complete all as specified and as directed.

Job No : 09/REV/61/SA/Q3W/2023-24 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and as directed.

Demolition of Two way trellis work japhri including taking as under of battens in trellis (posts and rails measured seperately) complete all as specified and as directed.

M & L for Providing precast cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throat- ing etc. and setting in CM (1:4) complete with joints to match complete all as specified and as directed.

M&L Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame Set in cement mortar 1:4 complete all as specified and as directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and as directed. (Note: Payment for providing grooves shall be made separately under respective item of this Schedule)

M&L rendering 15 mm thick in CM(1:4) on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Tiles battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.

M&L for preparing of New decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features and applying two coats of weather based paint of approved shade over wall care putty including scaffolding arrangement, trestles, ladders etc and cleaning of furniture and floors , doors/ windows upto two or three stories all as specified and directed Make should be ASIAN (or equivalent makes as per Appx 'B') and paint to be prepared by machines only and can be of different shades. Note :- 1.The paint shall be applied by rollers and other finishing tools to ensure smooth surface and consultaion with experts of ASIAN (or equivalent makes as per Appx 'B') paints will also be taken whereever necessary. 2. Painting shall be done by experts or by Asian (or equivalent makes as per Appx 'B') paints experts. 09/REV/61/SA/Q3W/2023-24 - 160.00 22/SR/61SA/BLDG/2023-24/Q3W - 750.00

M&L for preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features and applying two coats of weather based paint of approved shade over wall care putty including scaffolding arrangement, trestles, ladders etc and cleaning of furniture and floors , doors/ windows upto two or three stories all as specified and directed Make should be ASIAN (or equivalent makes as per Appx 'B') and paint to be prepared by machines only and can be of different shades. Note :- 1.The paint shall be applied by rollers and other finishing tools to ensure smooth surface and consultaion with experts of ASIAN (or equivalent makes as per Appx 'B') paints will also be taken whereever necessary. 2. Painting shall be done by experts or by Asian (or equivalent makes as per Appx 'B') paints experts. 09/REV/61/SA/Q3W/2023-24 - 2100.00 22/SR/61SA/BLDG/2023-24/Q3W -24 -1875.00

M&L for Machine cut cudapph stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with polishing complete all as specified and as directed.

Job No : 22/SR/61SA/BLDG/2023-24/Q3W Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified and as directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement complete all as specified and as directed.

Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (d) after drying one coat of (Home shield) roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 5 years shall be submitted by the contractor Make: Berger Paints (Damp shield elasto) or equilent of other make/brand viz Sika/ Asian Paints (Except Smart care Damp Proof)/ IWL

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on Brick/stone masonary stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even complete all as specified and as directed.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore including taking down of existing pipe complete all as specified and as directed.

S&F UPVC (SWR) bend of any radius of 110mm bore..including taking down of existing pipe complete all as specified and as directed.

S&F UPVC (SWR) bend provided with access door of any radius of 110mm bore complete all as specified and as directed.

S&F UPVC ( SWR ) single junction (single ' T ' ) equal or unequal provided with access door of 110mm bore complete all as specified and as directed.

ANKIT BUILDERS

M/S MAYANK ASSOCIATE

UNIVERSAL INFRAPROJECT PVT LTD

NAGHAR ENTERPRISES

MSR INFRATECH

Stuti Trading Company

M/S TRADE LINKERS