Karnataka

AOC

Works

Roads

Construction of CC road and Drain in various Colony in Sulla Village of Hubballi Taluk of Dharwad District

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Dharwad, Karnataka

Amount: ₹24.9 LCloses: 16 Feb 2026Closed

Bids

1 Bid16 Feb 2026

#	Company	Amount	Status
1	₹23.4 Laccepted-aoc	₹23.4 L	accepted-aoc

Tender Value

₹24.9 L

EMD Value

₹50,000

Closing Date

16 Feb 2026, 9:30 pmClosed

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Construction of CC road and Drain in various Colony in Sulla Village of Hubballi Taluk of Dharwad District

Tender Information

Tender ID

RDPR/2025-26/RD/WORK_INDENT24148

Reference Number

RDPR/2025-26/RD/WORK_INDENT24148

Tender Type

Open

Product Category

Roads

Location

RDPR Division Office Daharwad

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredContractor should upload KPWD renewal registration copy.

RequiredTo qualify for award of this contract each tenderer in his name should have in the last five years period ie 2020-21 to 2024-25 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years a minimum Annual Financial Turnover in all classes of civil Engineering construction works only Rs.24,93,237.09 with usually not less than the estimated cost under this contract with UDIN Number.

RequiredIn last five years That is 2020-21 to 2024-25 Satisfactorily completed as A prime contractor for at least one similar nature of work done work 50 Percent of the cost of the work that is not less than the amount Rs.12.47 Lakhs Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

RequiredLiquid assets and or availability of credit facilities of not less than Rs.7.48 Lakhs i.e., 30 percent of amount put to tender. Credit lines, letter of credit, certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional in given format.

RequiredThe contractor should scan the GST Certificate

RequiredThe contractor should scan the PAN card& Contact Details

RequiredCalculation sheet of Bidder Capacity AxNX2.5-B

RequiredTenderer should upload address and contact number.

RequiredTo qualify for award of this contract each Tenderer in its name should have in the last five years Executed in any one year the following minimum 80 Percent quantities of work in last five years 1. RCC/PCC-209.00 Cum, 2. WMM/WBM -153.30 Cum, 3. Steel-1649.62 Kg

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Conditional Tenders will not be accepted.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division,Dharwad, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

Contractor should obey with the above conditions in addition to the KW-2.

To qualify for award of this contract each tenderer in his name should have in the last five years period ie 2020-21 to 2024-25 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years a minimum Annual Financial Turnover in all classes of civil Engineering construction works only Rs.24,93,237.09 with usually not less than the estimated cost under this contract with UDIN Number.

In last five years (i.e., 2020-21 to 2024-25) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs.12.47 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

Liquid assets and /or availability of credit facilities of not less than Rs. 7.48 Lakhs(30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

Department of Mines and Geosciences Dated: 25-03-2013 Contractor Should get the Mineral Dispatch permit letter and submit it at the time of bill payment. In case of Non-submission of Mineral Dispatch permit action will be taken to impose a penalty of 5 times the Royalty.

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC at the time of aggrement (NSC should be fledge in the name of Executive Engineer)

To qualify for award of this contract each Tenderer in its name should have in the last five years Executed in any one year the following minimum 80 Percent quantities of work in last five years 1. RCC/PCC-209.00 Cum, 2. WMM/WBM -153.30 Cum, 3. Steel-1649.62 Kg

Assessed available tender capacity - (AxNx2.5 - B) Where A is Maximum value of civil engineering works executed in any one year during the last five years That is 2020-21 to 2024-25 year taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which Tenders are invited. B is Value, at price level, of existing commitments and on-going works to be completed during the next years.

Fee & Financial Details

Tender Fee Amount

₹630

EMD Fee Amount

₹50,000

Important Dates

Last Activity

16 Feb 2026

Published

7 Feb 2026

Download Ends

13 Feb 2026

BOQ Preview

•

Construction of CC road and Drain in various Colony in Sulla Village of Hubballi Taluk of Dharwad District

•

001 Scarifying Existing Granular Surface to a Depth of 50 mm by

•

Mechanical Means using Hydraulic excavator 1277.50 Sqm

•

002 Construction of Embankment by excavating the available approved Gravel/

•

Murrum deposited at a place or borrow pits during or prior excavation with all

•

lifts and lead, transportation to site, spreading... 191.63 Cum

•

003 Providing, laying, spreading and compacting graded stone

•

aggregate to wet mix macadam specification including premixing

•

the Material with water at OMC in mechanical mix plant carriage

•

of mixed Materia... 191.63 Cum

•

004 Providing and constructing un-reinforced plain cement

•

concrete pavement, thickness as per design, over a prepared

•

sub base, with 43 grade cement or any other type as per

•

Clause 1501.2.2 M20 (Grade), c... 191.63 Cum

•

005 Providing and laying 60mm thick factory made precast M -30

•

grade Cement Concrete Paver Block as per IRC SP 63:2018 &

•

IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved

•

shape and colour, laid... 9.00 Sqm

•

006 Earth work excavation for Foundation by mechanical means for all works &

•

depth upto 3 m, as per drawing and technical specifications, including setting

•

out, shoring, strutting, barricading, caution li... 161.10 Cum

•

007 Providing and laying in position Cement Concrete for levelling course for

•

all works in foundation. The granite/trap/basalt crushed graded coarse

•

aggregates and fine aggregates as per relevant IS Codes... 20.14 Cum

•

008 Providing and laying in position Cement Concrete for all Sub structures of

•

building, Irrigation works, Sub structure works of bridges, Drain works &

•

other parallel works from 0.50m to 3.50 m height. T... 49.48 Cum

•

009 Providing and laying in position Cement Concrete for all Sub structures of

•

building, Irrigation works, Sub structure works of bridges, Drain works &

•

other parallel works from 0.50m to 3.50 m height. T... 49.35 Sqm

•

010 Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

•

including cost of all materials, machinery, labour, cleaning, straightening,

•

cutting, bending, hooking, laping/we... 2062.03 Kg

•

011 Providing and fixing RCC name board of size 1.35x0.60x0.04

•

m fixed in reinforced cement concrete poles of size

•

0.10x0.10x2.60m in cement concrete M 20 proportion using

•

20mm and down size graded metal ... 1.00 No

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

24148-G.doc

Tender Document • 0.08 MB

sulla estimate 2025-26.pdf

Others - Detail estimate • 7.00 MB

Ready to Participate?

Download all tender documents and submit your bid