SPECIAL REPAIR TO BUILDING NO P-38 AND P-40 AT 24 ED UNDER AGE (I) MANAURI

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:3 and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces and applying three coats of white wash as in celing complete all as specified and directed.

M&L for preparation of old surfaces and applying three coats of white wash as in celing complete all as specified and directed.

M & L for complete removal of existing treatment on walls complete all as specified and directed.

M & L for providing wall care putty not less than 2 mm thick complete all as specified in SSR Part I and as directed by Engineer in charge.

M & L for providing 2 coats of Oil bound distemper over a coat of primer on old surfaces all as specified and directed.

M & L for rendering 15 mm thick in cement plaster 1 : 4 mixed with liquid water proofing chemical (@ 200 ml per bag of cement) on fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- liquid water proofing chemical shall be measured & paid seprately.

M&L for preparing of new suface of wall and applying two coats of cement based paint over a coat of primer all as specified and directed.

Supply only liquid waterproofing chemical

M&L for rendering 15 mm thick in cement plaster 1 : 6 and surface finished even and smooth without using extra cement all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old surface of walls and applying two coats of cement based paint complete all as specified and directed.

M & L for preparation of old steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old wooden surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed and M & L for roof treatment with APP polymeric water proofing membrane all as given below :-

M & L for plastering 10mm thick in CM 1 : 3 using 100% coarse sand on roof surface including water proofing compound as per manufacturers instructions and as directed by Engr-in-Charge.

Applying a coat of bituminous primer conforming to IS : 3384 - 1986 @ 0.40 Ltrs/Sqm and allow to dry.

M & L for laying 3mm thick APP modified polymeric water proofing membrane having weight 3.2 - 3.5 Kg/Sqm on prepared surface as per manufacturers instructions and over laps 10 cm and 15 cm longitudinal and traverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners.The membrane shall be torched into groove on vertical plane and grove sealed with cement mortar 1:3.

Applying two coats of aluminium paint over membrane @ 0.20 Kg/Sqm and all as per specification and directed by Engr-in-Charge.

Taking down existing water proofing treatment with old brick tiles and cleaning roof surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed and M & L for roof treatment with APP polymeric water proofing membrane all as given below :-

M & L for plastering 10mm thick in CM 1 : 3 using 100% coarse sand on roof surface including water proofing compound as per manufacturers instructions and as directed by Engr-in-Charge.

Applying a coat of bituminous primer conforming to IS : 3384 - 1986 @ 0.40 Ltrs/Sqm and allow to dry.

M & L for laying 3mm thick APP modified polymeric water proofing membrane having weight 3.2 - 3.5 Kg/Sqm on prepared surface as per manufacturers instructions and over laps 10 cm and 15 cm longitudinal and traverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners.The membrane shall be torched into groove on verticle plane and grove sealed with cement mortar 1:3.

M & L Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed laid over and including 15 mm thick screed bed or bedding layer in cement plaster 1 : 6 for laying floor finishes set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement an pigments

Taking down existing Expansion/Crumple Joint and cleaning joint surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed and M & L for expansion/crumple joint all as given below :-.

M & L for plastering 10mm thick in CM 1 : 3 using 100% coarse sand at surface of expsansion/crumple joint including water proofing compound as per manufacturers instructions and as directed by Engr-in-Charge.

Placing the required dia of baker rods inside the joint before applying the sealant

Applying and filling the joint with Fosroc thioflex 600(pourable grade) two part polysulphide sealant upto required level.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregates as in roof padding etc all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M & L for Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .

M & L for glazed ceramic coloured tiles 300x600 mm with colour & design as per direction of Engr in charge, fixed in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick in cement plaster 1 : 4 as backing coat for fixing tiles complete all as specified and directed .

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site complete all as specified and directed .

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each and removing from site complete all as specified and directed .

S&F floor door stopper, over all length of cover plate 140 mm of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to door shutter complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W (Gde- E- 250) quality- A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S & F powder coated aluminium doors frames and shutters fixed or side hung including jointing cleat for fixing including all fittings like handles, locks, hinges, stoppers, latches etc complete all as specified in Drg No CE (AF)/ NGP/ 03/ TD/ 32, Sheet 1 to 2/2 and as directed.

S & F powder coated aluminium grills of approved design and pattern, with approved standard section fixed to the window frame all as specified by Engr-in-Charge

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. .

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour approved by AGE (I) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete over and including 20 mm thick screed bed or bedding layer in cement plaster 1 : 4 for laying floor finishes complete all as specified and directed.

M & L for Machine cut polished kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, grinding, rubbing and polishing over and including 20 mm thick screed bed or bedding layer in cement plaster 1 : 4 for laying floor finishes complete all as specified and directed

M/L for Machine cut kota stone slab 20-25 mm thick in riser laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in cement plaster 1 :3 for laying as in dado, skirting, riser complete all as specified and directed .

M&L for grinding, rubbing, cutting and polishing in old kota stone flooring complete all as specified and as directed by Engineer in Charge.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick wood grain printed PVC sheet reinforced with M.S. Square tube & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & complete all as shown in SSR Part -II 2020 and as directed by AGE(I)/Engineer-in-Charge.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part -II 2020 and as directed by AGE(I)/Engineer-in-Charge.

S & F second class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed

S & F factory made 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed

M & L for factory made second class hardwood glazed and skeleton door shutters 30mm thick, open rebated and prepared to receive glass gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed

S & F sheet glass, 4 mm thick tinted shade ordinary quality and glazing with oil putty/rubber gasket in squares and complete all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Aluminum anodised barrel tower bolt of extruded section and fixed 125 mm long complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extrude section or cast aluminium complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed .

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and directed .

S&F in repair Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 1000 ltr including ball brass valves, high pressure, with polythelne float and fly nut in 20 mm bore complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 2000 ltr ncluding ball brass valves, high pressure, with polythelne float and fly nut in 32 mm bore complete all as specified and directed.

S&F in repair Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.

S & F in repair twin flush PVC valveless, syphonic action type, flushing cistern, low level, white colour capacity 10 liters with inlet and outlet, ball valve, handle including 32 mm bore PVC flush pipes & PVC connection pipe compete all as specified and directed. Make:- Cera cat part No. B-102016 or technocommerically equivalent make as in Prayag/Hindware or équivalent make as per list of make in Appx 'B'.

S & F in repair Vitreous china white urinal of size 325x310x420 mm complete including providing and fixing plugs ,bedding urinal against wall in Cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws ,pointing around urinal in back of cement ,including, connecting to flushing pipe and outgoing pipe compete all as specified and directed. MAKE-Cera Cat part no. S-4020112 or technocommerically equivalent make as in Prayag/Hindware or équivalent make as per list of make as per Appx 'B'

S & F in repair Table top Vitreous China wash basin , white colour, of size 450x400x160mm (rectangle bowl thin rim) including all fittings any size, all as specified and directed. Make-Cera cat part No. S-2020101 Model name Campa or technocommerically equivalent make as in Prayag/Hindware or équivalent make as per list of make as per Appx 'B'

S & F in repair Vitreous China wash down water closet pan white colour (pedestal pattern), with seat cover,flushing pipe 32mm dia for low level flushing cistern including padestal pan & trap,including connection to drain and to flushing pipe anti syphonage pipe etc compete all as specified and directed.

S&F in repair Vitreous China Squatting pan "Orissa pattern", size 580 x 440 mm white with integral foot rests, complete including provision of lime concrete bedding including supplying and fixing cast iron P or S trap compete all as specified and directed.

S&F in repair looking mirror fancy type decorative pattrern 5 to 6 mm thick fixed on wall with stainless steel studs compete all as specified and directed.

S&F in repair 15mm bore Bib taps, cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repairs 15mm bore Pillar taps, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repair 110/100mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110/100mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110/100mm bore PVC (SWR) 'S' trap any radius complete all as specified and directed.

S&F in repair 110/100mm bore PVC (SWR) 'P' trap any radius complete all as specified and directed.

S&F in repair 15mm dia bore CP wall mixer for mixing hot & cold water with wall flanges complete all as specified and as direcred.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repair fancy type Angle valve 15 mm dia chromium plated cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair PVC waste pipe for wash hand basin 32mm/40mm dia compete all as specified and directed.

S&F in repair SS Soap dish, any type, fixed to plugs with chromium plated plugs with brass screws compete all as specified and directed.

S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges compete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2mm dia of wire and total aperture 75mm, thickness of gunite n. exc 25mm thick (average thickness) using cement mortar 1:3 with OPC 43 grade cement mixed with polycreete admixture @2% by weight of cement or as per manufactures instructions and finally applying cement palster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper gerometrics in cement mortar 1:4 to match with the existing surface as in side soffits of slabs, chajjas, facias, parapets, columns and beams etc complete including necessary scaffolding, shuttering necessary chased to brick work or RCC members at any height upto four storey buildings incl removing of small trees shrubs etc all as specified (Note: steel welded mesh to be welded with the existing reinforcement). The cost of welded mesh to be welded with the exsting re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.

Taking down existing water proofing treatment and cleaning sunken floor by washing and rubbing etc and removing the material retrieved to a distance n.exc 500m where directed and providing water proofing treatment to sunken floors all as given below :-

Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight.

Sealing joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125.

Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Modified Cementitious slurry consisting of one part of TAPCRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours.

Applying a coat of TAPCRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured for 2 days.

Applying 15mm thick plaster in CM 1 : 4 mixed with CICO super at 100ml per 50 kg cement on treated surface

Filling the sunken portion with PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) upto required level complete all as specified and directed. Note:-PCC filling shall be measured & paid separately under respective item.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M & L for Filling the sunken portion with PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) upto required level complete all as specified and directed.

Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 15 mm dia pipe complete all as speicified and directed.

M & L for GI Tubing medium grade 15 mm bore of pipe, with all fitting and fixed complete to walls, ceilings or laid in floors complete all as speicified and directed.

Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 20 mm dia pipe complete all as speicified and directed.

M & L for GI Tubing medium grade 20 mm bore of pipe, with all fitting and fixed complete to walls, ceilings or laid in floors complete all as speicified and directed.

S & F in repair cast iron vent cowl 100 mm bore complete all as specified and directed.

S&F in repair mild steel chromium plated curtain rod 25 mm dia with brackets and stainless steel side decorative finials both side etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Eng-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate,as in foundation, filling & mass concrete as in sub base to floor etc complete all as specified and directed by Engr-in-charge.

M & L for 75mm Thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge.

M&L for providing 75 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (reinforced ) of any description and in any position compete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 type B-1, using 20mm graded stone agg, in covers slabs including necessary formwork complete all as specified and directed by the Engineer-in-Charge.

M&L for mild steel deformed TMT bar 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Taking down carefully (aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Material and labour for point wiring including concealed/ fixed on surface of structure/ truss etc rigid non-metallic PVC conduit pipe medium grade, ISI marked heavy duty in size 25 mm dia, with 1.5 Sqmm insulated unsheathed, FRLSH multi stranded copper conductor cable, confirimg to IS 694 single core 1100 volt grade with flush cast iron/ pressed steel/ PVC modular terminal boxes (as per site) of suitable size for fixing of modular accessories such as switches, sockets and fan regulators etc including modular cover plate in required modules and colour and including FRLSH insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 Sqmm as continous earth wire complete including making good the disturbed surfaces for the followiing:- Note;- Quoted rate shall be included cost of modular terminal box , cutting, chasing, plastering , colouring etc to surface of wall / beam/ roof etc matching with existed surface including required modular blank plate to be cover/ fill up the extra blank gap/ space of modular cover plate/ mounting board in required module /make / model etc. (2) The cost of modular cover plate with frame as S&F shall be paid against respective items of this schedule.

One light / Fan point controlled by one way indepdent switch.

One 2/3 pin 5 Amps socket out let point on same board controlled by one switch.

All as per above item No 89 here in before point wiring for 2/3 pin 5 Amps socket outlet independent using 2.5 Sqmm copper cable FRLSH for phase and neutral and 2.5 Sqmm as earth wire complete all as specified and directed.

All as per above item No 89 here in before power point wiring for 3/6 pin 16 Amp socket out let independent using 4 Sqmm copper conductor cable FRLSH insulated unsheathed and unsheathed copper conductor of 4 Sqmm as earth wire complete all as specified and directed.

Supply and fixing modular switch, one way 6 Amps 1 way module complete all as specified and directed.

Supply and fixing modular 2/3 pin 6 Amp socket outlet 2 way module complete all as specified and directed.

Supply and fixing modular switch socket outlet combination multipurpose 3 pin 16 Amp and 3 pin 6 Amp controlled by one switch, 3 way module complete all as specified and directed.

Supply and fixing modular switch socket outlet combination multipurpose 2/3 pin 6 Amp controlled by one switch,16 Amps 3 way module complete all as specified and directed.

Supply and fixing modular Fan step regulator 120W, 2 way module complete all as specified and directed. Note applicable for item no 92 to 96:- The colour of modular accessories shall be approved by AGE(I) in writing

Supply and fixing ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal complete all as specified and directed.

Supply and fixing white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing white cover plate with frame 6 module complete all as specified and directed.

Supply and fixing white cover plate with frame 8 module complete all as specified and directed.

Supply and laying concealed in surface of wall PVC conduit medium grade heavy duty 25 mm dia (2.5 mm thick minimum) for telephone and TV cable etc. Note;- Quoted rate shall be included cost of cutting, chasing, plastering and colouring etc to surface of wall / beam/ roof etc as site required matching with existing surface.

Supply and fixing LED recessed mounted down 18 W Bulk head light fitting energy saving low glare high power mounting on two Nos PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out old unsv fittings complete as directed. Make:- Philips/Crompton/ Havells/ Bajaj or equivalent make as mentioned in Appx 'B'.

Supply and fixing LED tube light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on two Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking down old unsv fitting complete as directed. Make :- Philips ( Smart Bright) BN 021 LED 20S 6500 PSU GR S1 / Or / Bajaj cat No BCLSBAL 20W CW/ Crompton or equivalent make as mentioned in Appx 'B'

Supply and fixing LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on two Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking down old unsv fitting complete as directed. Make :- Philips ( Smart Bright) BN 010 LED 25S 6500 PSU GR S1 / Or / Bajaj cat No BCLSB 10W NW in equivelent Philips/ Crompton or equivalent make as mentioned in Appx 'B'.

Supply and fixing LED street/ Bldg security light fittings 100 watts energy saving incl bracket, making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings and mounting bracket made out by GI pipe light grade in 25 mm dia of bore in required length bend in 120 degree fixed with clamping of surface of wall using clamp made out by GI strip in size 32 x4 mm using nut bolt and washer etc complete as directed. Make ; Philips cat No BRP409 LED 040 CW HO MR FG S1 PSU GR in equivelent Bajaj (warm white) Cat No BRTFG 45W LED WW / Crompton (for outfit area) or equivalent make as mentioned in Appx 'B'.

Supply and fixing ceiling fan in size 1200 mm sweep white colour BEE 5 star rated copper wound energy saving with set of sweep/ extension rod /"U" clamp and other accessories single phase 50 Hzs incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipe including taking down old ceiling fan and depositing to MES store yard complete. Make : Usha model EX 3 ,1200 MM (white colour) or equivalent in make Crompton greaves / Havells/ Khaitan/ Bajaj/ Orient or equivalent make as mentioned in Appx 'B'. Note : Quoted rated shall be included the cost of GI clamp made out strip in size 32 x6 mm with nut bolts washer etc Note :- Old ceiling fan shall be deposited to MES store yard of AGE(I) Manauri .

Supply and fixing wall mounted fan / air circulators heavy duty 450 mm sweep non capacitor bracket mounted type copper wound motor ISI marked BEE 4 star rated energy saving with fixing accessories complete making necessary electric connection including taking down old wall mounted fan / air circulators and depositing to MES store yard complete all as directed. Make:- Usha model MAX Air W/F (white colour) or equivalent model of make Crompton Greaves / Havells / Khaitan/ Bajaj/ Orient or equivalent make as mentioned in Appx 'B'. Note :- Old wall mounted fan shall be deposited to MES store yard of AGE(I) Manauri.

Supply and fixing exhaust fan 300 mm sweep steel body heavy duty with louver mounting bracket ISI marked BEE 4 star rated energy saving less noise capacitor type including plastering, colour coating etc and all site required work for disturbed surface matching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe including taking down old exhaust fan and depositing to MES store yard complete all as directed.. Make : Crompton Greaves / Havells/ Saahas (SI 300-6P) or equivalent make as mentioned in Appx 'B'. Note:- Old exhaust fan shall be deposited to MES store yard of AGE(I) Manauri .

Material and labour for sub main wiring with Two runs of single core PVC FRLSH IS-694 cable with colour code unsheathed multi-stranded copper conductor of size 10 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe 32 mm dia medium grade heavy duty with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 10 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 10 sqmm cable and one run of PVC conduit pipe shall be measured against one unit. (ii) Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Material and labour for sub main wiring with Two runs of single core PVC FRLSH IS-694 cable with colour code unsheathed multi-stranded copper conductor of size 6 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe 20 mm dia medium grade heavy duty with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 6 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 6 sqmm cable and one run of PVC conduit pipe shall be measured agaist one unit. (ii) Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fix sheet metal enclosure distribution board TPN, 4 poles ,double door, 8 way with 200 Amps rated copper bus bar vertical type including MCCB 4 pole 125 Amps 415 volts thermal megnatic base operated 16 KA as incomer with neutral link and maufacturer by OEM incl concealed in surface of wall and making all connection using gland , thimbles in required size including taking down of old unserviceable DB with accessoires complete all as specified and directed. Make ;- Legrand/ Seimens/ L&T or equivalent make as mentioned in Appx 'B'. Note : Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 12 way with 200 Amp rated bus bar 230 Volts concealed in the surface of wall including taking down of old unserviceable DBs with accessories complete. Make :- Legrand/ Seimens/ L&T or equivalent make as mentioned in Appx 'B'. Note : Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts concealed in the surface of wall including taking down of old unserviceable DBs with accessories complete.Make :- Legrand/ Seimens/ L&T or equivalent make as mentioned in Appx 'B'. Note : Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 4 way with 200 Amp rated bus bar 230 Volts concealed in the surface of wall including taking down of old unserviceable DBs with accessories complete. Make ;- Legrand/ Seimens/ L&T or equivalent make as mentioned in Appx 'B'. Note : Cost of cutting /chasing/ plastering /colouring etc to match with disturbed surface shall deemed to be included in the quoted rate.

Supply and fixing MCB , SPN 230 volts , 63 Amps , "C" Curve 10 KA complete all as specified and directed.

Supply and fixing MCB , single pole 230 volts , 40 Amps , "C" Curve 10 KA complete all as specified and directed.

S & F water heater storage type electric complete capacity 25 Ltrs, 5 star rated with all accessories and fittings and making electric connection using three core copper cable drawn through in PVC conduit pipe including taking down old water heater and depositing to MES store yard complete all as directed. Make : Bajaj Calenta 25 litre/ Usha Aqua Genie (Solid Cyan)/ Havells Puro plus or equivalent make as mentioned in Appx 'B'. Note :- Old geyser shall be deposited to MES store yard of AGE(I) Manauri .

S &F PVC connections 15mm size with PTMT nut of length 600mm long.

S&F in repair 15mm bore stop valve, cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S & F in repair Sheet Metal enclosures with Socket Plug Top and MCBs 240V, 25 Amp single pole and neutral enclosures with a two pin and earth plug and socket complete with on single pole MCB all as specified and directed by Engg-in-charge. Make : Havells/ Legrand/ L&T or equivalent make as mentioned in Appx 'B'.

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6 MM thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtrs below normal ground level, connected to galvanized GI strip 32 x 6 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip from earth electrode and 15 MM as watering with wiremesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40 x 40 x 3 MM and RCC cover 40 MM thick (1:2:4) type B-1 using 20 MM graded stone aggregate reinforced with 6 MM dia round bars @ 75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I (2010) and connected to earth test point including testing complete all as specified and directed. Note : Quoted rates shall deemed to be included the cost of GI strip upto 7.5 Mtr and required earth work..

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtrs below normal ground level, connected to galvanized GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 MM bore for protection of GI strip from earth electrode and 15 MM as watering with wiremesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40 x 40 x 3 MM and RCC cover 40 MM thick (1:2:4) type B-1 using 20 MM graded stone aggregate reinforced with 6 MM dia round bars @ 75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I (2010) and connected to earth test point including testing complete all as specified and directed. Note : Quoted rates shall deemed to be included the cost of GI wire upto 20.0 Mtr and required earth work..

Supply, laying, jointing and testing underground cable of size 70 Sqmm 3.5 core, 1100 volts grade, XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with multi-stranded aluminium conductor laid in trenches, passing through pipe, ducts and making electrical connection with including suitable size lugs proper crimped by crimping tool, thimbles, glands, GI Nuts and bolts, washers, insulation tape etc including taking down old cable complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for laying of cables and getting out including trimming of sides complete all as specified and directed.

Material and labour for sand cushioning with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. Note: Punned thickness shall be measured for payment.

Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other for cable protection complete all as specified and directed.

Returing, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick each layer compete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

Supply and laying 40 mm bore galvanized steel tubing "light grade" with all fittings,clamps, bolts, nuts and washers (ISI Marked) and fixing to the pole complete with all fittings, laid in trenches/fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

AMRESH TRADERS

Minakshi Construction

M/S Garg Sons

Z N Enterprises

DKS ENGINEERING WORKS