PROVN OF 01 X GUARD ROOM WITH ATTACHED TOILET AT UNIT RP AT MP LINES AND PARKING SHED OF SIZE (30 X 3M) AT 23 PARA (SF) UNDER GE (EAST) AGRA

Amount

Surface excavation, N. exc 30 CM deep and ave 15 cm, getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches nexc 1.5m wide and nexc 1.5m in depth as in foundation etc as in any type of soil complete all as specified and directed.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers nexc 25cm as in soil complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point with soil complete all as specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc complete all as specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in column complete all as specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in roof beams, chajja lintle etc complete all as specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in slabs suppoorted on walls,beams and column in floors, roof, landings, balconies, canopies, deck slab and in shevels the like complete all as specified and directed.

M&L Formwork to side of concrete foundation footing base of column raft beam and plinth beam with required gap filler etc complete all as specified and directed.

M & L form work to side/bottom of pillars , post , column, beam, slab square , rectangular or polygonal required gap filler etc complete all as specified and directed.

M& L form work to sofits of suspended slabs such as roof slabs,floors slabs,landings/chajja and similar work not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete required gap filler complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, oncrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work for fair and smooth surface exc 10cm but n exc 20cm wide complete all as specified and directed.

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.

S&F mild steel bars 5 mm dia and over up to 10 mm dia in stirrups space and binders. (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel complete all as specified and directed.

M&L hardcore of gauge exc.63 mm but not exc 100 mm deposited, spread and levelled in layers n exc. 15 CM thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

M&L 20 mm Rendering / beraring plaster with CM (1:4) over brick/concrete surface fair & even surface complete all as specified and directed.

M&L12 mm Rendering with CM (1:6) over brick/concrete surface other than surface fair & even surface complete all as specified and directed.

M&L15mm rendering in CM (1:4) mixed with WPC over brick/concrete surface finished even & fair complete all specified and directed. ( Note :- WPC shall be measured Sparely )

All as per item No 21.00 above but finished even and smooth without using extra cement complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

M&L for Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.

M&L for factory made Pressed steel frames 125 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate,etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed.

M&L two coat of synthetic enamel paint over new prepared steel surface but over red oxide primer complete all as specified and directed.

S&F mild steel work for hold fast and similar small articles conforming to Fe 410-0 or Fe 310-0 including MS screws, bolts, including tarring with a coat of tar and sanding complete all as specified and directed.

M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded aggregate) for embedding hold fasts including necessary form work etc complete all as specified and directed.

S & F 35 mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L 30mm thick 2nd class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.24(a); supplied and fitted to chowkats complete all as specified and directed (2nd class hardwood) (Factory made ).

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.

S&F MS butt hinges of midium weight cold rolled 100mm size complete all as specified and directed.

S&F Allu butt hinges of 100mm size type C-22 complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of 200 mm of extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy.anodised, sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F aluminium, anodised handle cast type of size125 mm complete all as specified and directed.

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L PCC Type B-0 (1:2:4) 12.5 mm graded with water proofing compound for damp proof plinth course incl all form mould etc complete. (Note:- WPC shall be measured sapratly)

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick incl and over cement screed bed 20 mm thick in 1:6 cement and sand mortrar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and incl 10 mm thick cement screed bed 1:4 cement and sand mortrar, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C1 using 20mm graded stone agg as in plinth protection/Path/paving surface even and smooth and and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified and directed.

M & L Two coats of cement base paint over coat of primer over new prepared wall surfaces complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamper over ver a coat of average 2mm thick Birla putty, complete all as specified and directed.

M&L Three coat of W/W over newly plasterd on ceiling surfacess incl preparation complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20 mm outer dia on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 25 mm outer dia on walls/ceiling or laying in floors complete all as specified and directed.

S&F Brass elbow for 20 mm outer Dia CPVC Pipe complete all as specified and directed.

S&F Brass Tee for 20 mm outer Dia CPVC Pipe complete all as specified and directed.

S&F 20 mm outer Dia Male Brass Threaded Adaptor (MTA/ MBTA complete all as specified and directed.

S&F 20 mm outer Dia Union complete all as specified and directed.

S&F Brass elbow for 25 mm outer Dia CPVC Pipe complete all as specified and directed.

S&F Brass Tee for 25 mm outer Dia CPVC Pipe complete all as specified and directed.

S&F 25 mm outer Dia Male Brass Threaded Adaptor (MTA/ MBTA complete all as specified and directed.

S&F 25 mm outer Dia tank Adaptor complete all as specified and directed.

S&F 25 mm outer Dia Union complete all as specified and directed.

S&F 25 mm outer Dia Ball valve complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres complete all as specified and directed.

S&F15mm,CP angle cock fancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F15mm ,bib tap , fancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed with cement complete all as specified and directed.

S&F Soap dish of PVC fixed with pvc rawal plugs and screw complete all as specified and directed.

S &F Tublar towel rail 20mm dia D type 60 cm long between flange Brass CP complete all as specified and directed.

S & F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vetical with threaded closed top) hoisted and fixed in position complete all as specified and directed in SSR Part - I.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of loose 20 mm (minimum weight 210 grams) complete all as specified and directed.

S&F water closet including provision of cement concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with integral foot rest etc. excluding flushing cistern complete all as specified and directed.

S&F Vitreous China wash hand basin Counter type (Make- Cera Cat No - S2030119, Snow White) ,CP waste cupling and 32 mm pvc flexible waste pipe 800mm long etc complete all as specified and directed . Jaquar/CERA/Kajariya Bathware.

M&L for 20mm thick granite stone slab (of any type) as in floor or skirting, over 20 mm thick screed bed in CM 1:4,machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

S&F 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs, 5 to 6 mm thick bevelled edge looking mirror of required size & shape of best quality with 50 X 20 mm teak wood polished beading with 6 mm thick ply/AC/PVC board beading fixed with C.P screw etc complete all as specified and directed.

S&F PVC (SWR) Pipe of 110mm dia any length and joint complete all as specified and directed.

S&F PVC (SWR) Pipe of 75mm dia any length and joint complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all as specified and directed.

S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete.

S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and directed.

S&F 110mm dia PVC(SWR) vent cowl complete all as specified and directed.

M & L 75 mm dia of out let PVC (SWR) floor trap plain with grating incl. jointing with solvent cement complete all as specified and directed.

M & L PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement with greating complete all as specified and directed.

M&L 10mm thick rendring with CM (1:4) over roof surface surface finished even and smooth mixed with WPC complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing teratment with APP modified polymeric of weight not less than 3 kg / sqm water proofing membrane with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (e) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F Urinal spredder of CP brass for fixing with 15 mm dia of pipe complete all as specified and directed.

Low density polyethylene (LDPE) pipes 32 mm of pressure rating 6kgf/sq. cm complete all as specified and directed.

Waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed.

S&F Brass CP shower rose of 65mm size complete suitable for 15mm dia of pipe complete all as specified and directed.

S&F 15 mm Stop valves concealed type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

Cutting grooves in brick wall, 15mm wide and 15 mm deep and shaping horizontal face of grooves all beams and colmn joints complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken ubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for cement concrete 1:2:4 type B- 1 using 20 mm graded stone aggregate as in foundations, filling and mass-concrete/copings /mud stops etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete etc complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-35 grade with gray cement and pigment, complete all as specified and directed.

M&L three coat of white wash on walls including preparation of new plastered surface complete all as specified and directed.

M & L for prepariation of newly iron/ steel surfaces of any description with two coats of bituminus Paint etc complete all as specified & directed.

S&F for steel truss in tubular trusses including special type of washer and using ERW washer or induction butt welded mild steel tubes conforming to IS : 1161 - 1988 grade St - 240 etc complete all as specified and directed.

S&F for Rolled mild steel sections conforming to Fe 410-W (Gde -E- 250) quality - A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for fixing with angle cleats or other connecting plates etc complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gd 165 complete all as specified and directed.

Mild steel screw (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm long but n exc 15 cm long of 12 mm dia complete all as specified and directed.

M&L for pre painted galvatume AL zinc coating GI based corrugated steel 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

S&F of Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall/north light curve, fixed with self tapping screws as specified complete all as specified and directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 including flush pointing external faces with the same mortar as the work proceeds complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings, kerbs, benching and the like, including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC (1:3:6) type C-2 for 150 mm dia of pipe complete all as specified and directed.

M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars drain pipe complete all as specified and directed.

M&L precast RCC as in cover slab including all form work mould etc using Type B1 (1:2:4) with 20mm graded stone agg and set in CM (1:6) complete all as specified and directed.

M&L MS Bar 6mm to 8mm dia cut to length bent to shape including cranking cutting bending and binding with 0.9mm dia MS annealed wire complete all as specified and directed.(TMT Bar) complete all as specified and directed.

M&L for Point wiring complete for One light point controlled by one switch with PVC insualted and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, MS sunken boxes duly painted with one coat of red oxide and one coat of black paint not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

All as per item No 115.00 here in before but for one 3 Pin 5 Amp switch Socket outlet point on Same board with other switches

All as per item No 115.00 here in before but for one 3 Pin 5 Amp switch Socket outlet point on an independent board

All as per item No 115.00 here in before but with cable size FRLSH cable 4 Sq mm for one AC socket out let/ 15 Amps and multistrand insulated copper earth continuity conductor of size FRLSH cable 4 sqmm all as specified and directed

Supply and fixing switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

Supply and fixing Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.

Supply and fixing socket 5 amps 3 pin flush type, 240 volts. with polycarbonate body com-plete all as specified and directed.

Supply and fixing socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator socket type (5 Steps) ISI marked on the existing phenolic laminated sheet etc. as required, complete all as specified and directed.

Supply and fix ceiling rose ,PVC polycarbonate, isolated body surface Bakelite 65mm dia three terminals all as specified and directed.

Supply and fixing LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 feet 20 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed.

Supply and fixing Lamp holder/angle holder insulated body with black/white plate for batten fittings incl 7 watt LED Bulb complete all as specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixed to pole or wall of building with and including suitable Bracket made out of 32 mm dia GI light grade pipe, 1.20 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 35x6 mm to be tightened with suitable size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduit including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.

Supply installation, testing and commissioning for Integrated LED type solar street light 30 W, Solar Panel of capacity 60W(MONO) 18V, Lithium ferro Phosphate (LiFeP04) battery 12.8V / 21 AH with long life, PIR Motion sensor for automatic dimming and brightness of light, Maintenance free system, Inbuilt BMS (battery management system) for battery safety, Longer shelf life of battery for storage, All Components are integrated inside one unit which make it theft retardant system, lumens > 110 lm/w, LED burning life is 50000 hrs, viewing angle should be 120 degree, colour temp 6000 K, Microcontroller based charge controller cum driver with adjustable, protection from short circuit, overload and reverse polarity including GI pipe heavy grade 50 mm dia not less than 6 mtr length incl MS clamp of size 35x5mm, excavation, PCC for erection of pipe, complete all as specified and directed. Make : Bajaj Model No BSZSL 30W or equivalent approved make

Supply and fixing ceiling fan (copper winding), 1200mm sweep, minimum BLDC (Brush Less Direct Current Energy saving ceiling fan of size 1200 mm sweep, 230 Volts, 50 Hz power consumption is less than 28 watt, 5 star rated noiseless motor operation, inverter stabilization technology, 370 RPM, 210 cum/min complete with standard accessories i.e (three blade, 02 Nos canopy, down rod of length 1.5 mtr to 2.0 mtr long, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc), double ball bearing, copper wound, including electrically connecting from ceiling rose to fan connector with 0.75 sqmm stranded copper conductor three core flexible cable with suitable size flexible PVC conduit complete all as specified and directed.

Supply and fixing of Exhaust Fan(copper winding) high quality mettalic body, heavy duty (4 blades) resistant to colour change 300 mm sweep, 900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 0.75 Sqmm copper cable and suitable size of flexible conduit pipe from celling rose to exhaust fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete complete all as specified and directed.

Supply and fixing of electric water heater, storage type made of ultra thick super cold rolled steel plates, feroglass dry powder coating technology inner tank (copper) and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW capaci-ty,230 V, 1 Phase AC, 50 Hz, 50 litre, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating element offers superior heating performance and resistance to oxidation and carbonation at high temperatures rated complete with all accessories such as safety valve, thermostat,NRV, connection piece etc complete all as specified and directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rat-ed bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 4 way ISI marked, complete complete all as specified and directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rat-ed bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 12 way ISI marked, complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete complete all as specified and directed.

Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete complete all as specified and directed.

M&L for Submain wiring with two single core FRLSH 4 sqmm copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including FRLSH 4 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified Note:- Two single core FRLSH 4 sqmm copper conductor, one run PVC conduit and one run of FRLSH 4 sqmm earth wire shall be considered & measured as one unit.

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 16 sq mm 2 core in trench/floor/on pole/wall/under road, complete all as specified and directed.

Supply and lay HDPE pipe double wall medium class, ISI Marked corrugated as in cable protection pipe of outer dia 50 mm including all fittings complete all as specified and directed.

Supply and fix post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver, lamp including grouting of GI pipe medium grade not less than 32mm, complete all as specified and directed.

M&L for drilling suitable dia horizontal bore holes for insertion/ laying of 40 mm to 90 mm bore HDPE pipe of any description below/under existing road surfaces / floors at a level not less than 0.60 metre etc with using mechanical / or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed. Note : (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed

Supply and fix Stop valves of size 25mm (1"), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed

Balaji Associates

C P Singh and Co

Attar Singh and Sons

N.K. ENTERPRISES

M/S OMKAR SINGH YADAV

M/s SCHOLASTIC ENTERPRISES