WELCOME MAINT FOR OFFICERS MD ACCN AT AOR OF AGE B/R-V UNDER GE (MCTE) MHOW

Amount

M&L for preparing old existing treatment of wall and applying two coat of oil bound distemper white or any tint etc complete as specified and directed

M&L for preparing old existing treatment of wall and applying one coat of oil bound distemper white or any tint etc complete all as specified and directed.

M&L for preparation of surfaces and applying one coat Acryic emulsion with roller on old treated surfaces of wall etc complete all as specified and directed (Note:- Contractor shall furnished gurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machin (Mechanical means) complete all as specified and directed.

M&L for preparation of surfaces and applying two coat Acryic emulsion with roller on old treated surfaces of wall etc complete all as specified and directed (Note:- Contractor shall furnished gurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machin (Mechanical means)

M&L for preparing old surface of ceiling surface and applying two coats of white wash etc complete all as specified and directed.

M&L for preparing old plastered surface of ceiling and applying two coat of oil bound distemper etc complete all as specified and directed.

M&L for preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 3mm thick wall care putty on walls complete all as specified and directed.

M&L for 3mm thick wall care putty on ceilings complete all as specified and directed.

Material and Labour for applying two or more coats of 100% Premium exterior acrylic emulsion paint latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of equired shade (Company Depot Tinted) with silicon additives @ 1.43 liter/10 sqmover and including priming coat of exterior primer applied @ 0.90 litre/10sqm Note:- (i) contractor shall furnished guarantee for four years againts service rendered) (ii) primer and emulsion tobe carred out through air less spray machine (mechanical means) complete all as specified and as directed.

Material and Labour for applying one coat of 100% Premium exterior acrylic emulsion paint latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of equired shade (Company Depot Tinted) with silicon additives @ 1.43 liter/10 sqmover and including priming coat of exterior primer applied @ 0.90 litre/10sqm Note:- (i) contractor shall furnished guarantee for four years againts service rendered) (ii) primer and emulsion tobe carred out through air less spray machine (mechanical means) complete all as specified and as directed.

Removal of plants/ trees of n.exc 30 cm from roof tops/ sides external walls of bldg chajjas, wall juctions of rain water/ CI soil/ waste pipe juctions including taking out the roots entered in wall/ slab surface and making food the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) incl the preparation the GI/CI/PVC Pipe joints whitch were damaged during cutting/ taking out process to match existing and finishing the disturbed surfaces to match the existing incl necessary scaffolding/ staging upto a height of 15.00mtr from the ground level complete all as specified as directed. (ii) The debris vegetation plant/tree shall be disposed of to a distance exc 0.5 KM and n.exc 1 Km all as directed by Engr-in-charge. (iii) For deciding the grith of the plant/tree the height shall be taken at 30 cm above the slabe/ wall. (iv) The labour employed by the contractor for carring out the work shall be provided with equipment and quoted shall be deemed to include the same.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering/ cladding to wall, including flashings, ridges, valley etc fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering/ cladding to wall, fixed with self tapping screws as specified. complete all as specified and directed.

Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and directed.

S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240etc complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturer instructions, complete all as specified and directed. Note:- WPC shall be measured & paid seperately.

M&L for preparation of new surfaces of plastered walls and applying two coat of distemper oil emulsion incl priming the surface and incl one coat of white wall putty complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coat of cement based paint complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No. 26.00 on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic light shade tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and as directed

All as per Srl item No. 28.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per Srl item No. 30.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land. complete all as specified and directed

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per Srl item No. 34.00 on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and as directed.

M&L for PCC 75mm thick type C2 (1:3:6) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and directed.

S&F in repair Stainless steel curtain rod/ rail 25mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

S & F in repair Vitreous china, (Single piece with flushing cistern) wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc complete all as specified and directed.

S & F in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china, white, wash hand basin, flat back size 550mm x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed.

S&F in repair 110mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F in repair stainless steel kitchen plate rack size 600 x 900 x 150mm of approved pattern made out of stainless steel sheet 0.63mm thick sheet with round 8mm dia rods including hanging arrangements complete all as specified and directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15mm bore bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S&F in repair 15mm bore brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F in repair laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specified and directed

Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F in repair laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S & F in repair Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S & F in repair Stainless Steel Wall Mount Case with Soap Holder & Brush Holder fixed to wall complete all as specified and directed by Engr-in-Charge.

S & F in repair Hand shower 1.5 m CP Flexible SS Tube, 5 flow Hand Shower, adjustable wall hook, rubbit cleaning system all as specified and directed.

S & F in repair Flexible waste pipe for wash hand basin fittled to Wash Hand Basin including all necessary brackets etc complete all as specified and directed.

S & F in repair 32/40mm PVC downpipe for kitchen sink fittled to Kitchen Sink including all necessary brackets etc complete all as specified and directed.

S& F in repair flush Pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

S & F in repair Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden/ steel window in square n exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M & L in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.

S&F in repair PVC water tank covers premium quality fitted to tank of existing make of Cap. 500 ltrs to 1000 ltr complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted incl fixing of 20mm dia float valve and fixed in position including taking down and removing the existing water tank all as specified in SSR Part-I, complete all as specified and directed.

S&F 500 ltr capacity rotational moulded polythelene water storages tanks (cylindrical verticle with closed top) hoisted incl fixing of 20mm dia float valve and fixed in position including taking down and removing the existing water tank all as specified in SSR Part-I, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for Fly ash Brickwork straight or curved on plan exc 6m mean radius built in Cement mortar 1:6, complete all as specified and directed

S&F solid PVC wall panelling consisting of 5mm thick wood grain painted fixed over PVC sheet fillet of width 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S & F of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking up or down steel tubing complete all as specified and directed.

S & F of CPVC brass elbow (3/4" X ½") for 20mm outer dia CPVC pipe complete all as specified and directed.

S&F, in repair brass spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed.

S&F, in repair brass concealed spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed.

S&F, in repair brass mixer spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed.

Supply only water proofing compound (Liquid) complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for PCC 50mm thick type C2 (1:3:6) using 40mm graded stone aggregate) as in sub base for flooring etc, complete all as specified and as directed.

M&L for PCC 40mm thick type B-1 (1:2:4) using 20mm graded stone aggregate) as in sub base for flooring etc, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

GIRIRAJ CONSTRUCTION AND TRADERS (BID ID -3473129)

Jamna Constructions (BID ID -3473455)