GeM

AOC

Goods

Hopper Tipper Dumper

PRODUCT

Hopper Tipper Dumper

Town Panchyath Jagalur

Davangere, Karnataka

Amount: Refer DocsCloses: 15 Nov 2019Closed

Timeline

Published5 Nov 2019
Closed15 Nov 2019
Awarded15 Nov 2019

Bids

4 Bids15 Nov 2019

#	Company	Offered Item	Amount	Rank	Status
1	TATA MOTORS LIMITED L1₹16.0 LQualified Make: TATA MOTORS Model: Tata ACE 2 Cu.M Fully Company Built-Up Box Tipper BS-IV 1ST FLOOR BOMBAY HOUSE 24 HOMI MODY STREET HUTATMA CHOWK MUMBAI MAHARASHTRA 400001 \| MUMBAI \| MAHARASHTRA \| 400001	Make: TATA MOTORS Model: Tata ACE 2 Cu.M Fully Company Built-Up Box Tipper BS-IV	₹16.0 L	L1	Qualified
2	CONTINENTAL ENGINES PRIVATE LIMITED Disqualified Make: BAXY Model: CEPL, BAXY-2CUM-GT-CLOSED-TATA A 21 9 PRITHVIRAJ ROAD NEW DELHI DELHI 110003 \| NEW DELHI \| DELHI \| 110003	Make: BAXY Model: CEPL, BAXY-2CUM-GT-CLOSED-TATA	-	-	Disqualified
3	KADAM AUTOLINES Disqualified Make: KTIP Model: Garbage Tipper 2 Cum(TATA) 1026 E WARD NEAR SHRI KRUSHNA TEMPLE RAJARAM ROAD SHIVAJI UDYAMNAGAR KOLHAPUR MAHARASHTRA 416008 UDYAM MH 15 0005379 \| KOLHAPUR \| MAHARASHTRA \| 416008	Make: KTIP Model: Garbage Tipper 2 Cum(TATA)	-	-	Disqualified MSE, Category: General
4	PIPADA MOTORS Disqualified Make: NA Model: 2 Cu. M Fully Company Built Closed Box Tipper BS-IV with Hard Top Cover & Dry Wet Partition 1 NAV NAGAPUR TAL AHMEDNAGAR SANGAMNER AHMEDNAGAR SANGAMNER AHMEDNAGAR AHMEDNAGAR MAHARASHTRA 414001 \| AHMEDNAGAR \| MAHARASHTRA \| 414001	Make: NA Model: 2 Cu. M Fully Company Built Closed Box Tipper BS-IV with Hard Top Cover & Dry Wet Partition	-	-	Disqualified MSE, Category: General

Tender Value

Refer Docs

EMD Value

Exempted

Closing Date

15 Nov 2019, 5:00 pmClosed

Work Description

Hopper Tipper Dumper

Tender Information

Tender ID

1457614

Reference Number

GEM/2019/B/412625

Product Category

Hopper Tipper Dumper

Period of Work

90 days

Location

Karnataka; Davangere

Bid Type

PRODUCT

Source Website

Subscribe to view

Documents Required

15 documents required · 15 mandatory

RequiredExperience with Government

RequiredAnnual Turnover

RequiredOEM Authorization Certificate

RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years

Requiredending on 31st March of the previous financial year

Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old

Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Hopper Tipper Dumper ( 3 pieces ) Technical Specifications * As per GeM Category Specification 1/5 Specification Specification Name Values Bid Requirement (Allowed Values) Certification Chassis Certification ARAI * Chassis Certification ARAI/VRDE/ICAT No - * At the time of supply of the equipment

Requiredthe chassis should not be more than 6 months old Yes * Generic Parameters Type of TIPPER Garbage Tipper Garbage Tipper Type of TIPPER if other tipper

Requiredplease declare type of Tipper

Required- * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel Vehicle Emission Complaince BS-IV BS-IV Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Kmpl) 21.5 * Speed

RequiredMax (Km/Hr) 60 * Max Engine Power BHP (BHP@rpm) 16 More than 16.0 Or higher Rated RPM at Max Engine Power 3200 * Max Engine Torque (N-M@rpm) 39 More than 39.0 Or higher Rated RPM at Max Engine Torque 1800 * Main Engine Aspiration Natural Aspiration Natural Aspiration No. of Cylinder in Main Engine (Nos) 2 * Fuel Tank Capacity (Ltrs) 30 * Gradeability of Vehicle with load( %) 16.38 * 2/5 Ground Clearance (mm) 160 * Wheel Base (mm) 2100 * Kerb Weight (Kg) 720 * Gross Vehicle Weight (Kg) 1700 More than 1700.0 Or higher Type of BIS MARKED Vehicle Tyre Radial * Chassis Transmission System Manual Manual Number of Speed Forward Gears 4 * Type of Steering Manual Manual Turning Radius

RequiredMin (mm) 4300 Less than 4300.0 Or lower Speed Governers/ECU Yes * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 48 * Tipper Container cap acity/Volume(cubic metres) 2 2.0 - 20.0 Or higher Consructional Parameters Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 304.8 * Tipper body Pivot length (mm) 1546 * Tipper body Length (mm) 2165 * Tipper Body Height (mm) 670 * Overall Height of Tipper from Ground (mm) 1489 * Body Plate Thickness (mm) 1.6 * Main Frame Thickness (mm) 3 * Hydraulic System Yes * Tipping Hydraulic - * 3/5 Cylinders(Make) Hydraulic System Driven by Main Engine * Tipper Container Material Mild Steel Mild Steel Thickness of sheet from tipper Collector Container Made (mm) 1.6 * Dumping Height (mm) 353 * Engine Oil Pressure Level Indicator in Control Panel Yes * Fuel Gauge Indicator in Control Panel Yes * Engine Cooling Liquid Temperature Indicator in Control Panel Yes * Operating Hour Meter No * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight No * If yes Counter Weight (kg) 0 * Paint Automotive Paint * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 12.0 No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 12

Required24

Required36 Or higher Warranty Distance (Km)(Unlimited during warranty Period) Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters

Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.

Eligibility Criteria

Min Turnover

₹31

OEM Turnover

₹8 L

Items & Quantities

Item	Delivery Location	Qty	Delivery
Hopper Tipper Dumper	-	3	-

Total: 3

Fee & Financial Details

EMD Fee Amount

Exempted

Important Dates

Last Activity

15 Nov 2019

Published

5 Nov 2019

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Documents

bid_1457614.pdf

GEM_BID

Work Item Documents

termsCondition.pdf

OTHER

2657c7ca70287299b5181580fdb5a7ab.pdf

OTHER

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].