8223-REPAIRS TO CERTAIN FURNITURE UNDER GE STM

Amount

Charpoy GI pipe with plywood top, FD-220

Dismantling of all members and U/S plywood top of charpoy GI pipe carefully and segregate the unserviceable members and stacking it, complete all as Shown on drawing and as directed.

Supply, cutting, threading of GI Pipe 32mm dia medium grade of size as specified for long rail, complete all as Shown on drawing and as directed.

Cutting, modifying and threading of the dismantled GI pipe 32mm dia long rail into short rail, complete all as Shown on drawing and as directed.

Cutting, threading and modifying of the dismantled GI pipe 32mm short rails into legs of size as shown in the drawings, providing flat iron clamps 25x3mm-2 Nos made of shape as shown in the drawing to welded in the GI Pipe legs to hold FMN Set, painted with black synthetic enamel paint, complete all as Shown on drawing and as directed.

Supply only 3 way elbow of 32mm for charpoy GI pipe. The elbow shall not be less than 400 gms in weight with ISI Mark for GI pipe charpoy, complete all as Shown on drawing and as directed.

Supply only 32mm dia GI checknut for GI pipe charpoy, complete all as Shown on drawing and as directed. .

Supply only 75mm length GI round headed bolt and nut with suitable cut washer, complete all as Shown on drawing and as directed.

Removing U/S steel flat iron stiffeners and supply and fix new steel flat iron stiffeners made out of 40x6mm and length not less than 0.91 mtr including painting the stiffener with 2 coats of synthetic enamel black paint over a coat of red oxide primer, complete all as Shown on drawing and as directed.

Re-assembling the GI charpoy with serviceable members obtained from item No 1.10 and new members made vide item Nos 1.20 to 1.80 above. Supply & fixing of 12mm thick BWR plywood (7 ply) of size 2.00 mtr x 0.91 mtr make as approved by GE. The edges of the plywood shall be finished with sand paper for smooth surface. The plywood top shall be fixed with 75mm length GI round headed bolt and nut with suitable cut washer as per existing arrangement (supplied under item 1.70 above) complete all as Shown on drawing and as directed.

Cot tubular steel

Removing paint by scrapping down old painted surface carrying out repairs such as removing the dents and welding wherever required and applying one coat of synthetic enamel black paint over a coat of red oxide primer on cot tubular steel, complete all as Shown on drawing and as directed..

Removing the existing unserviceable cotton newar from the cot tubular and reweaving with new cotton newar of width 48mm, superior quality as approved in sample (14 rows length wise and 34 rows width wise), complete all as Shown on drawing and as directed.

Charpoy IP hard top / Bed hard top, Drg No: FD/MAP/SD/07, FD/MAP-II/01, FD/E6/MAP/08 (R)

Scrapping down the rusted portion of Charpoy IP hard top / Bed hard top with sand paper smoothing the surfaces carrying out repairs such as welding wherever required and applying two coat of synthetic enamel black paint, over one coat of red oxide primer and removing the U/S PVC Bush and S&F new PVC Bush, complete all as Shown on drawing and as directed.

Removing the existing U/S Ply wood from Charpoy IP hard top / Bed hard top and supply and fix 12mm thick BWR plywood and S&F suitable flat headed nuts and bolt including suitable Cut Washer, complete all as Shown on drawing and as directed.

Table bed side MAP

Removing the existing unserviceable top from Table Bed side MAP and supply and fix new top of 18mm thick prelaminated particle board, exterior grade, bonded with formaldehyde with one side teak facing and balancing white on the other side as per existing shape, size and colour. 4mm thick teak wood beading shall be provided all round the top, complete all as Shown on drawing and as directed.

Removing the existing unserviceable side portion of Table Bed side MAP and supply and fix new side made out of 18mm thick prelaminated particle board, exterior grade, bonded with formaldehyde with one side teak facing and balancing white on the other side with 4mm thick teak wood beading as per existing shape, size and colour, complete all as Shown on drawing and as directed.

Removing the existing unserviceable drawers of Table bed side MAP and supply and fixing of new drawers as per existing shape and size. Front portion of drawer shall be provided with 18mm thick prelaminated particle board, exterior grade, bonded with formaldehyde with one side teak facing and balancing white on the other side as per existing shade. Side portion and inside of the drawer shall be provided with 12mm thick commercial plywood and bottom shall be provided with 6mm thick plywood commercial. 100mm SS handle shall be fixed as per existing shade, complete all as Shown on drawing and as directed.

SHANMUGA TRADERS

M/s KM Marimuthu Achary

SRI CHAKRA CABINETS

RKRISHNANANDSONS

SIVA ENTERPRISES

SHAPE MAKER