PERIODICAL SERVICES, MISC B/R REPAIR WORKS AND ROOF TREATMENT WORKS IN MD ACCN UNDER ZONE I AREA AT JAIPUR MIL STN

Amount

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles

M&L brick work with sub class 'B' Bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L Brick work with sub-class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M & L providing cement concrete 1:2:4 type B-1 (20 mm graded aggregates) as in coping over wall

M & L stone walling of random rubble , uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge held against the dressed surface n. exc 40mm for Sand stone and dressing of face beds and joints, as specified of random rubble walling uncoursed complete all as specified and directed.

M&L for pointing to squared rubble, coursed or uncoursed stone masonry with cement mortar in 1:4 as per specification or directed.

M&L plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar complete all as specified and directed.

M & L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in coving at juction of chajja/slab and wall/ lintel/ beam finished even and smooth in any situation and position including form work complete

M & L Machine cut kota stone slab 20 to 25mm thick as in cooking plateform in single piece not exc 1.5m in length laid over 15mm thick screed in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete

M & L as fixed in repair Machine cut kota stone slab 20 to 25mm thick as in shelves & similar works in sigle piece not exc 1.5m in length, fixed and jointed with grey cement set and pointed in cement mortar 1:4 including rubbing polishing incl cutting chases as required and making good to facing as original in CM 1:4 for inserting stone slab shelves in brick walls complete

Rounding to edges of stone slabs one edges such as in cooking platform, shelves and other similar situations

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin/spring/ clip complete

S & F 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and directed. .

S & F 4mm thick figured glass pin head type and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and directed. .

S & F in repair drapery rod PVC insulated 25 mm dia incl fixing brackets and decorative knobs on each end of rod of approved pattern and colour complete including taking down old curtain rod with brackets

S & F in repair swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, (minimum weight 40 gms) Make - Prayag or equivalent as approved by GE.

Dismantling old unserviceable RCC / PVC water tank & removal from site complete all as directed capacity exceedind 250 ltr and not exc 500 ltrs

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I, Make - Sintex or equivalent as approved by GE.

S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete

S & F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete

S & F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm,

Disconnecting existing tank of capacity exc 250 and not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc including replacement of float valve complete.

S & F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms). Make- Prayag or equivalent as approved by GE.

M & L for scrapping concrete or plastered surface and applying two coat of Dr Fixit Pidifin 2K chemical or equivalent including rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound of Dr Fixit or equivalent surface finished even and smooth w/o extra cement. (Note- All water proofing compound will be used as per manufacturer's instructions and their cost deemed to be included in the rate of this item).

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches or in floor incl PCC bedding, haunching for 100 mm internal dia of pipe complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for fdn etc and getting out in soft loose soil complete all as specified and directed.

Returning, filling in, incl spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified and directed.

M & L concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 100mm bore of pipe

S & F 100mm bore cast iron sand cast soil, waste & vent pipe in any length with or without ears fixed with cement joints laid in trenches or in floor

S & F as in repair cast iron floor trap 75mm dia outlet with grating including jointing to wastage pipe fixed in cement concrete 1:2:4 type B-1.

S&F in repairs PVC waste pipe flexible 32mm dia for WHB all as specified

S & F in repair hasp and staple of size 100mm mild steel safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete

S & F in repair 100mm butt hinges medium weight cold rolled mild steel including necessary welding work for fixing to mild steel/ iron door frame and fixed to shutter complete

M & L for repair of broken projecting type/ box type hinges of steel window/ ventilators with and including new hinges fixed by welding incl matching with existing surface and easing the window for opening and closing

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying one coat of white wash all as specified and directed.

All as per item No 38 above but two coats of white wash on wall

M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

All as per item No 40 above but two coats of white wash on ceiling.

M & L for preparation of old surface of walls and applying one coat of distemper oil emulsion of any tint all as directed.

All as per item No 42 above but two coats of distemper oil emulsion of any tint on wall all as directed

M & L for Washing, rubbing down and stopping of painted surfaces of old surface of walls and applying one coat of cement paint of any tint all as directed.

All as per item No 44 above but two coats of cement paint of any tint on wall all as directed

M & L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

All as per item No 46 above but two coats of synthetic enamel paint of any tint on wooden surfaces all as specified and directed.

M & L for preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed

All as per item No 48 above but two coats of synthetic enamel paint of any tint on steel surfaces all as specified and directed

Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints, hacking for key, scrubbing with water etc.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint including priming plastered surfaces with alkali resistant priming paint complete all as specified and directed.

M & L for making good the edges of chajja/ facias in proper shape with rich cement mortar 1:2 / PCC 1:2:4 type B-1 including matching the surface with existing treatment complete all as directed

M & L complete removal of existing treatment from the walls and applying two coats of distemper oil-emulsion over one coat of priming paint of any tint over Birla Putty on walls including preparation of surfaces, rubbing etc all as specified and directed

M & L complete removal of existing treatment from the walls and applying two coats of distemper oil emulsion of any tint over priming the surfaces with chalk whiting preparatory to distempering all as specified and directed

M & L rendering 10mm thick on dubbing out surfaces on ceiling in CM (1:3) as floating/ setting coat in patches not exc 3 sqm each patch complete all as specified and directed.

M & L GI wire netting 0.90mm dia and 12mm mesh lathing to metal studding etc in ceilings including all laps, cutting and waste in repairs in patches n exc 5 sqm each including taking down old and jointing new to old as required.

M & L Dubbing out average 10mm thick cement plaster 1:4 on irregular face of ceiling complete all as specified and directed.

M & L removal of existing treatment from steel surfaces by paint removers or burning off by blow lamps and cleaning with scrappers, any mumber of coats, any width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Demolition of precast RCC Jallies including raming of any description any position set in cement mortar complete all as specified.

M&L for providing precast cement concrete lourvres and jallies 25mm thickincluding all moulding but excluding frame of type B0 1:2:4 using 12.5mm graded stone aggregate. set in cement mortor 1:4 complete all as specified and directed.

M&L for reinforced cement concrete type B-1 20mm graded aggregate in precast posts sturts etc forjaffriwall fencing posts average sectional area n. exc 100 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops as direted and fixed.

Demolition stone slabs and tiles of any description ot thickness in floors,aprons etc laid dry or laid dry and pointed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade fixed with grey cement and no pigment over a layer of sand cushion 25mm thick complete all as specified and directed.

Demolition of PCC in ground floor and paving n exc 15 CM thickness(below or above ground level) complete all as specified and directed.

M&L PCC (1:4:8) type D-2 40mm using graded stone aggregate as in sub base of flooring, 100 mm thickness complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed of approved quality

M&L reinforcement cement concrete (Nominal mix) type B1, 1:2:4 (20mm graded aggregate) as in slab support on walls, landing, balconies, deck slabs and in shelves and the like all as specified

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

all as per item No 73 above but 5mm dia and over upto and including 10mm dia in stirups, spacers and binders

S&F as in repair 15mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F PVC water storage tank cover for capacity exc 250 ltr but not exc 500 ltr including driling holes for nut and bolts all as specified

M&L scrapping roof surface with wire brushes and washing with water etc including taking down old cement plaster, PCC of any thickness, description in any situation ,position and roof treatment any type for making good to receive new roof treatment any type. and removal of same from site to out side of MOD land complete all as specified and directed.

M&L screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes in roof, finished even and smooth without using extra cement complete all as specified & as directed.

M&L painted cement plastered surfaces with one coat of cold applied bituminous primer @ 0.40 ltr/Sqm conforming to IS-3384 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing.

M&L for marble crezy over 20mm the screed in CM 1:4 shall be laid over surface obtained after fine sand dusting. When the cement is still green, 18-20mm thick marble crazy pieces shall be spread in regular panel using dividers of marble strips 18-20 mm thick and 50mm wide the size of panels shall be 1.0 to 1.50 m in length and breadth spread over the entire roof area so that 80-85% area of roof is covereed by these piecses leaving joints 10 to 15 mm vide the spece for joints shall be filled with cement sands and marble agg of 4 to 7mm size like in " cast in situ tarrazo topping" the work of placing curing and grinding shall be done all as per clause 13.38.4 to 13.38.6 of SSR Part-I

M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & as directed.

M&L for wash stone grit plaster on exterior walls in two layers, under 12mm thick plaster in CM 1:4 furrowing the under layer with scrtched tool, applying cement slurry on the under layer 3kg /sqm, top layer 15mm thick cement plaster 1:1.5/2 ( one cement 1.5 sand 2 stone chipping 10mm nominal size) in panel with groove all aroung as per approved pattern incl scrubing and washing, the top layers with brushes and water to expose the stone chipping completeall as specified.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame.

S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

M & L size 100x75mm, rebated, karoli stone chowkats with exposed faces close picked dressed, including 4 bolt holes ‘per upright’, erected in position and bedded and pointed in cement mortar 1:6 complete all as specified and directed.

Refixing in same opening of old door shutters of any description exc 1 Sqm but n exc 2 Sqm in size.

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary.

S & F 300mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate complete all as specified and directed.

S & F 150mm long mild steel pressed handles oval type stove enamelled black complete

S & F 150mm long aluminium handles, cast type anodised complete

S & F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete

S & F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete

S & F aluminium door stopper 75mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L Preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Two coats of synthetic enamel paint to steel surfaces over red oxide primer exc 10 CM in width or girth including preparation of new steel surfaces.

M&L for running welding in repairs to mild steel hinges coming out from steel frame( rates to be included for filling material and work place is segregated) thickness of metal to be welded n exc 6 mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 25mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor all as specified.

M & L coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed.

M & L glazed coloured ceramic tiles 300x200x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as approved and directed.

M & L coloured glazed ceramic joint free tiles 400x400x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M & L coloured glazed joint free ceramic tiles 400x400x7 to 8mm thick in vertical surface as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

Schedule of Credit

Ravi Enterprises

S.R.Enterprises

J.J.ENGINEERING

M/S JALANDRA CONSTRUCTIONS

M/S Chandra Mohan Bansal

parmanand & company

agrawal constructions