SPECIAL REPAIR OF INTERNAL WIRING IN BLDG NO. P-5 (OR LIVING) OF MTN BDE CAMP OF DALHOUSIE CANTT

Amount

Taking down carefully copper/aluminium point wiring in PVC casing caping /PVC surface conduit/concealed PVC/steel conduit (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in PVC Concealed conduit of approved size and quality ISI marked in Brick machinary/Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash/colour wash all as per existing finishes complete including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring".fixed on walls/ceiling including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engr-in-charge

All as per Srl item No 2 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 2 here in before but for one 5 amps socket out let on independent board.

All as per item No 2 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 5 Amps

Supply & Fixing Socket outlet 3 pin, 5 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 15 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 15 amps flush type.

Supply and fix ceiling rose 65X50 mm three terminals complete all as specified.

Supply and fix lamp holder for batten/angle fitting.complete all as specified and as directed

S & F 7 watts B22 CDL 3 STAR LAMP LED 6500 K complete all as specified and as directed Make- Cat Part :- LHLDEUEEML8R007 of Havells/ Cat Part :- N71001of Wipro,or equivalent in Philips/Bajaj all as specified and as directed.

S & F Wall mounted LED integrated batten fitting 20 W LED T-5, 4 feet, PVC extruded.Including all accessories complete all as specified and as directed by Engr-in- charge. Make:- Havells cat part No-LHEXBXPNIN1W020 or equivalent in C&S Cat part No LTTB4F20WLEDP/W or Phlips cat part No- BN021C LED 20S PSU NW GR

S & F Wall mounted LED integrateg batten fitting 10 W LED, 2 feet, PVC extruded. C&S Cat part No LTTB2F10WLED/W or equivalent in Havells cat part No- LHEXBYPNIN1W010/ Phillips Cat part No-BN021LED10S- 6500PSUGRS1including all accessories complete all as specified and as directed by Engr- in- charge.

S&F Mirror optices linear & compact 9W LED mirror light fitting 2 feet with decorative gray end caps, polycarbonate body and ribbed opal diffuser complete all as specified and as directed by Engr-in charge, Make:- Havells Cat part No- LHEXARP7PN1W009 ,9W LED 6000K or equivailent make in in Philips/Bajaj

S & F LED bulk head light fitting 10 Watts Cat Part CG80IB10WLED of C&S or LBHE-10-CDL of Crompton or equivalent in Havells/Bajaj, complete all as specified and directed.

Supply and fixing street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent in shape required fixed to pole/ wall with two Nos MS clamps made out of 25x4mm thick flat including nuts and bolts and washer etc complete for fixing of street light fitting including taking down existing.

Supply & fixing Building street light luminaire, LED street light 30 watt, IP66 Powder coated pressure die cast aluminium compact High Power LED Street light with heat resistant toughened glass. Cat Part No LSTS-30-CDL of crompton or ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC of Havells or equivalent as in Phillips /Bajaj as approved by Engineer-in-Charge including taking down existing any street light fitting.

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, PVC sheathed two run (as phase and neutral) and run 4.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one pvc concealed conduit wiring in Brick machinary/Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash/colour wash all as per existing finishes complete all as specified and directed by Engr-in-charge.

Supply & Fixing Sheet metal enclosure for TPN DB,s, double door (when MCB,s to be used) triple pole & neutral 4 way with 200 amps rated bus bar 415 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBTPNHPDD04 of C&S, or 810336 of Indoasian or equivalent in Havells/Legrand

Supply & Fixing Sheet metal enclosure for SPN DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBSPNDD08 of C&S, or equivalent in Havells/Legrand

Supply & Fixing Sheet metal enclosure for SPN DB,s, double door (when MCB,s to be used) single pole & neutral 4 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBSPNDD04 of C&S, or equivalent in Havells/Legrand

Supply and fixing MCB TPN (Three pole & Neutral)100 Amps 415 Volts all as specified and directed. Make, Havells, Legrand, L&T

Supply and fixing inreplacement MCB single pole and neutral 63 amps, 240 volts complete all as specified and directed. Make:- C&S Cat Part No-CSMBS1C63N/Havells Cat Part No DHMGCSNF063 /Legrand Cat Part No-4086 20

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. Make:- C&S Cat Part No-CSMBS1C6N to CSMBS1C32N or Havells Cat Part No DHMGCSNF006-32/Legrand Cat Part No-4086 09 06 to 4086 17 032,

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

M&L GI pipe light grade 40 mm dia for cable protection laid in trench , under road /nalah or under floor wall etc complete all as directed by Engr-in charge.

M&L for cutting into existing road in required width in any condition for laying of cable through pipe and making good the distrubed surfaces by using cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as required complete all as specified and as directed by Engr-in -charge,

M&L for cutting / grooving on plinth /wall/verandha in any condition for laying of cable through pipe and making good the distrubed surfaces by using cement concrete 1:2:4 type C-2 using 12.50 mm graded stone aggregate as required complete all as specified and as directed by Engr-in -charge,

Supply & laying XLPE insulated armoured heavy duty electric cable with aluminuin conductor, 1100 V grade, cross sectional area 50 sqmm 3.5 core.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as directed.

M&L for sand cushioning for cable protection 8 cm below the cable and 15 cm above the cable complete all as specified and directed.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5mtr above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in each layers.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

Material and labour for Earthing complete with copper plate 60×60cm ×3.15mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to 20×3mm copper strip as earthing lead by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

S&F in replacement Air termination single pointed copper rod 12 mm dia 300 mm long fixed including taking out old air termination rod complete all as specified and directed

Dismantling of old copper/Aluminium strip of any size, complete including making good of disturbed portions of wall all as specified and directed by Engr-in-charge.

S&F in replacement Copper strip 20 x 3.15mm thick fixed with porcelain / PVC saddles and fixing screws etc with minimum two number saddles with screws on and including PVC gutties in each one mtr of length for roof conductors and down conductors above ground, complete all as specified and directed.

S&F in Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed by Engr in charge

M/S SHAKTI ELECTRIC WORKS

M/S VISHAVKARMA REFRIGERATION AND ELECTRIC WORKS