Construction of balance work of Government Degree College Banihal (Academic and administrative Block)

Amount

Execution of balance work

Centering & shuttering including strutting, propping etc. and removal of form work for:-

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, griders, bressumers and cantilevers.

Reinforced cement concrete work in slabs beem column etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement. (a) 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size).( Incl. all carriages complete).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars upto floor 5 level..( Incl. all carriages complete).

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level in 1:4:8 ( 1 cement: 4 Coarse sand: 8 graded stone aggregate 40mm nominal size) crushed..( Incl. all carriages complete).

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).( Incl. all carriages complete).

Half brick masnory with bricks of class designation 75 in foundation cement mortar 1:4 (1 cement : 4 coarse sand) upto level -V.( Incl. all carriages complete).

15mm thick cement sand plaster on the rough side of single or half brick wall in mix 1:6 (1 cement : 6 coarse sand).( Incl. all carriages complete).

18mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 3 (1 cement : 3 coarse sand) finished rough with sponge.( Incl. all carriages complete).

Providing and fixing 60mm of concrete pavement tiles laid on 20mm thick cement mortar in mix 1:4 including filling of joint with grout to match the shade of slab .( Incl. all carriages complete).

Providing and fixing GRANITE FLOORING (Safdar Ali) with 20mm (nominal) thick GRANITE SLABS of approved shade and size, set in 20mm (nominal) thick 1 cement : 3 coarse sand mortar, joints finished with white cement and matching shade pigments incl. cutting and electricity charges but excl. cost of all material .( Incl. all carriages complete).

Providing and fixing Ist quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, RAK, KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete..( Incl. all carriages complete).

Providing and fixing Antiskid floor tiles 300x300 mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 13755 of NITCO, RAK KAJARIA, or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete..( Incl. all carriages complete).

Providing and laying Antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make NITCO, RAK KAJARIA in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (including skirting) Size of tile 30x30cm .( Incl. all carriages complete).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make (NITCO, RAK KAJARIA,) in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile (60x60)cm..( Incl. all carriages complete).

Providing and laying vitrified tiles on walls(Skirting) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make (NITCO, RAK KAJARIA,) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. .( Incl. all carriages complete).

Providing wood work in frames of doors and windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). 2nd class deodar wood. .( Incl. all carriages complete).

Providing and fixing 35 mm panelled or paneled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately, all complete as per direction of Engineer-incharge in 2nd class deodar wood..( Incl. all carriages complete).

Providing and fixing 12mm thick water proof ply ISI : marked panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 2nd class deodar wood..( Incl. all carriages complete).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 50x12mm.( Incl. all carriages complete).

Providing and fixing 35mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 MM with wire of dia. 0.63mm for doors, windows and clerestory windows with hinges and necessary screws (ISI marked bright finished or / and black enamelled M.S butt hinges with necessary screws). 2nd class deodar wood..( Incl. all carriages complete).

Providing and fixing glass panes with putty and glazing in steel doors, windows, clear storey windows, all complete with (a) 4.0mm thick glass panes..( Incl. all carriages complete).

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.(Ceiling).( Incl. all carriages complete).

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture including priming coats with water thinnable cement primer on walls..( Incl. all carriages complete).

Finishing walls with textured exterior paint of required shade on Newwork (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand andmanufacture, including applying additional coats wherever required, to achieve even shade and colour..including a coat of primer and make good surface complete.( Two coats)

Finishing with ready mixed white primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required color to give and even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. Wood work

Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats).

Providing and fixing Powder coated aluminium work for doors, windows, ventilators and partitions (minimum thckness of powder coated 50 microns) with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make (Jindal or Hindalco) conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) .( Incl. all carriages complete).

polyster powder coated aluminium minimum thickness of powder coated 50 micron ( section is to be used (101x48x3 )mm

Providing and fixing Powder coated aluminium (minimum thickness of powder coated 50 microns) shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.)(Jindal or Hindalco).( Incl. all carriages complete).

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides..( Incl. all carriages complete).

Providing and fixing glazing With float glass panes of 5.50 mm thickness (weight not less than 13 .. 50 kg I sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubberI neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (complete job).

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats square or round bars etc. all complete. (a) fixed to openings/ wooden frames with rawl plugs screws etc..( Incl. all carriages complete).

Making of POP cornic as per approved drawings at the joint of beam and slab incl. finishing and scalfolding

Plumbing &Sanitary Installation Works:-

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually control(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing wash basin with C.I/M.S. brackets, 15mm C.P. brass taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whenever required:

White vitreous china wash basin size 630 x 450 mm with a pair of 15mm C.P brass pillar taps.

Round basin 405 x 355 mm with single 15mm C.P. brass pillar trap. (Stainless Channel steel)

Providing and fixing white vitreous cement china pedestal wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively. 1 Urinal basin with 5 litre white PVC automatic flashing cistern.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6mm thick hard.

Rectangular shape 453x357mm

Rectangular shape 1500x 450mm

Providing and fixing 600x120x5mm glass shelf with edge round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing white vitreous china laboratory sink including making all connection excluding cost of fitting:

Size 450 x 300 x 150 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe 40mm dia

(B). C.P. Fitting

Providing and fixing of 15 mm CP bib cock of approved make ( Jaguar make) having code no. CON CHR 037 confirming to IS 2980

Providing and fixing of CP Angle value of Jaguar make having code no. CON CHR053

Providing and fixing of 15 mm C.P. brass long nose bib cock of approved make (Jaguar make) having code no. CON CHR 307 confirming to IS 2980

Providing and fixing of CP mixer of approved make having code no. 167 B

Providing and fixing of 600 mm long tower rail of approved make having code no. 1111

Providing and fixing of scare tower ring having code no. 1121

Providing and fixing of CP soap dish of approved make having code no. 1131 N

Providing and fixing of CP paper holder of approved made with necessary screw and plastic gatti make having code no. 1151

Providing and fix of CP shower of approved make having code no. 1799 incl. shower arm

Providing and fixing 10mm sand CP grating for gully, floor or nahani trap.

Providing and fixing in position 40mm diameter mosquito proof cooping of approved municipal design.

Providing and fixing of CP nipple of approved make

Providing and fixing trap of self cleaning design with screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors:

100mm inlet and 100mm outlet sand cast iron S&S as per IS: 1729

100mm inlet and 75mm outlet sand cast iron S&S as per IS: 1729

Providing installation and testing of Geyser of approved quality and manufacture jagwar make mounted on bolted, well anchored in wall and connected with hot and cold G.I. connection with superior angle values as required: (25 litres capacity)

C). Water Supply, CP Fittings, Disposal System:-

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good walls.

25 mm dia nominal bore (medium)

15mm dia nominal bore (medium)

20mm dia nominal bore (medium)

Concealed pipe including painting with anti-corrosive bit mastic paint, cutting chases and making good the wall

15mm dia nominal bore.

20mm dia nominal bore.

Providing and fixing G.I pipes complete with G.I fittings and clamps, trenching and refilling etc. (external work)(25mm dia nominal bore.)

Making connection of G.I distributing branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. and making long screws etc. complete. (25 to 40mm nominal bore)

Fixing water meter and stop cock G.Ipipe line including cutting and threading the pipe and making long screws etc. complete. (cost of water meter and stop cock to be paid separately) (20 mm to 25 mm)

Providing and fixing ball value (brass) of approved quality complete. High or low pressure with plastic floats.

20 mm nominal bore

15 mm nominal bore

Providing and fixing gun metal non-return value with of approved quality (screwed end) (25 mm nominal bore (vertical)

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Providing and fixing of PVC pipe of 4Kg/ Cm Square of approved make ( Supreme) for caring disposal of seat and waste water of wash basin etc. incl. scaffolding complete.

Providing and fixing PVC floor trape of supreme make of size 100x 75

Providing and fixing of PVC collar of approved make of supreme make

Providing and fixing of PVC plain bend of supreme make

Providing and fixing of steel clamp of good quality incl. fixing the screws and making good the wall

Providing and fixing of PVC Door bend of supreme make

Providing and fixing of PVC door Tee

Providing and filling of joints in PVC pipe with solution and ring of required size

Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), including finished complete so as to make it leak proof.

Making hole up to 20x20 cm and embedding pipes up to 150mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20mm nominal size) including disposal of malba.

(D). Sewer Line

Earth work in excavation by manual means in trenches of required width for pipes, cables. All kinds of soil-(a) pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) aii-round S.W. pipes including bed concrete as per standard design: ( for150mm diameter S. W. pipe) crushed

Providing and lying of cement concrete in 1:3:6 mix ( 1 cement : 3 coarse sand: 6 graded stone aggregate) using 20 mm nominal size aggregate for in encasing of pipe ( Crushed)

Centering and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete. (for in casing of pipe)

Providing laying and PVC pipes of Supreme make

160mm (4kg/cm2)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4, C.I. cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame not less than 38kgs, R.C.C. top slab with 1:2:4 mix, foundation concrete 1:5:10, inside plastering 12mm thick with cement mortar 1:3, finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.

Inside dimension 455x610m and 45cm deep for single pipe line with common burnt clay bricks

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type.

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying and fixing C.I. cover without frame for manholes:

455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Supplying and fixing C.I. cover 300x300mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) RCC top slab with 1:1.5.3 mix ( 1 cement : 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

inside size 90x80 cm and 45 Cm deep incl. C.I cover with frame ( light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 Kg ( weight of cover 23 Kg and weight of frame 15 Kg)With F.P.S bricks with class designation 75 and with Crushed stone aggregate

Inside size 90x80 cm and 60 Cm deep incl. C.I cover with frame ( light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 Kg ( weight of cover 23 Kg and weight of frame 15 Kg)

Inside size 120 x 90 cm and 90 Cm deep incl. C.I cover with frame ( medium duty) 500 mm internal diamensions total weight of cover and frame to be not less than 116 Kg ( weight of cover 58 Kg and weight of frame 58 Kg)

Construction of Septic Tank

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. In all kind of soil

Disposal of excavated material obtained from platform cutting and also from trenches with lead beyond 5 Km through mechanical transport.

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)( incl. all lead, lifts and carriages etc. complete).

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)( incl. all lead, lifts and carriages etc. complete).

Half brick masonry Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)( incl. all lead, lifts and carriages etc. complete).

CEMENT PLASTER (IN FINE SAND) 20mm Cement plaster of mix: ( incl. all lead, lifts and carriages etc. complete).

1 : 4 ( 1 cement : 4 fine sand)

Providing and laying 50 mm concrete flooring 1:2:4 ( 1 cement :2 caorse sand: 4 graded stone aggregate ) 20 mm( incl. all lead, lifts and carriages etc. complete).

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for:( incl. all lead, lifts and carriages etc. complete).

Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or mor ( incl. all lead, lifts and carriages etc. complete).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)( incl. all lead, lifts and carriages etc. complete).

Construction of soakage pit at Govt. Degree College Banihal

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge In all kind of soil

Disposal of excavated material obtained from platform cutting and also from trenches with lead beyond 1 Km through mechanical transport.

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)( incl. all lead, lifts and carriages etc. complete).

Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)( incl. all lead, lifts and carriages etc. complete).

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)( incl. all lead, lifts and carriages etc. complete).

Filling of brick bats in soakage pit in layers incl. cost of brick bats and carriage complete

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for:( incl. all lead, lifts and carriages etc. complete).

Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or mor ( incl. all lead, lifts and carriages etc. complete).

Providing and fixing of 600 x 600 mm cover with frame

SITC OF CCTV CAMERAS

CAMERA--bullet-Image Sensor/signal system 1/3" SONY IMX238 CMOS SENSOR Synchronizing System-internal Horizontal Resolution-2 MEGA PIXEL Lens-3.6 mm IR LED-24 PCS Min. illumination /shutter speed-0.01LUX/F1.2, 0 lux (IR ON)/ 1/50-1/100000S Exposure-Auto Gamma Correction-0.45 White Blance-Multimode S/N Ratio->60dB AGC/BLC/WDR-Auto/Manual Video Output-1Vp-p Composite & HD output WDR-Digital Wide Dynamic Range Motion Detection-4 zones Privacy Masking-4 zones Control Mode-OSD Menu available iR Light Wavelength /IR cut Filter-850 NM/ cut filter Auto IR Distance-20-30m Day Night-AUTO Housing-IP65 Certification-CE/FCC/RHOS (CERTIFICATE TO BE ATTACHED) Brand-- Axis,Pelco,Godrej, Sony

CAMERA- INDOOR -Dome--Image Sensor/signal system 1/3" SONY IMX238 CMOS SENSOR Synchronizing System-internal Horizontal Resolution-2 MEGA PIXEL Lens-3.6 mm IR LED-24 PCS Min. illumination /shutter speed-0.01LUX/F1.2, 0 lux (IR ON)/ 1/50-1/100000S Exposure-Auto Gamma Correction-0.45 White Blance-Multimode S/N Ratio->60dB AGC/BLC/WDR-Auto/Manual Video Output-1Vp-p Composite & HD output WDR-Digital Wide Dynamic Range Motion Detection-4 zones Privacy Masking-4 zones Control Mode-OSD Menu available iR Light Wavelength /IR cut Filter-850 NM/ cut filter Auto IR Distance-20-30m Day Night-AUTO Housing-IP66 Certification-CE/FCC/RHOS (CERTIFICATE TO BE ATTACHED) Brand-- Axis,Pelco,Godrej, Sony

NVR (TRIBID) Operating System-Linux No of channels-16 Min internal HDD for video recording-4TB Video surveillance HDD- Smart HDD management-non working HDD Hibernation,HDD Faulty alarm,Raid Function Hot Swappable Display speed-100/200fps recording for CIF and real time recording Recording Speed-25fps at HD recording resolution per channel with flexible frame rate option. Compression method-Advance Video Recording (AVC) (H.264/MPEG Part10) Independent Recording setting per channel-Continous,Motion detection,Sensor activated Flexible date/time Daily Schedule Watermarking-For law enforcement grade video authentication. Monitoring-Real Time Searching-Date & Time based. 1Ch searching & all Channel simultaneos searching. Backup facility- Provision for external HDD and USB backup.Software for playback of recorded images should automatically be loaded on to the back-up DVD or pen drive so that it can be viewed at any PC directly Motion Detection: Support setting motion detection /Area Demarcation per camera User Interface: On screen graphic user interface System Recovery after Power Failure-Auto-Rebooting Brand-Axis,Pelco,Godrej,Sony

Supply and providing RG Full copper

Supply and providing 2 core 1 sq mm copper cable

Supply and providing power supplies 12V 2 Amp/5 Amp/10Amp

Supply and providing 20 mm dia PVC conduit

Supply and providing 49" LED TV Sony / Samsung

EXTERNAL LIGHTING Above 4.5 metre and upto 6.5 metre

Supply of pole mounted post top lantern for external lighting With LED lamps complete with required nos. lamps and control gear etc. 70 W

Installation, testing and commissioning of LED post top lantern with required lamps complete with control gear box, ballast, capacitor etc. including connection with 3 x 1.5 sq.mm flexible fire retardant copper connecting wire of required length complete as required.

Installation, testing and commissioning of LED type bollard garden light fixtures with required lamps, control gear box, including connection with 3 x 1.5 sq.mm flexible fire retardant copper connecting wire of required length complete as required.

Supply of bollard garden light suitable for LED lamps complete with required nos. lamps, control gear etc. complete as required as per the standard catalogue item 18 W

Supply and fixing of steel tubular pole 7.50 m long of designation 410 SP-6 fixed in 1:3:6 cement concrete foundation, including excavation, back filling etc. complete in all respects.

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Street Light Luminaire with aesthetically designed die cast aluminium housing , POT optics reflector and toughned flat glass (IP65) 70 W

Providing and Laying of 3 Core 1.5 Sq. mm Cu wire for above mentioned luminaries

Feeder Pillar Incomer 63 A TPN MCB, Otgoing 32 A Dp 10 Pieces of size 2.5x2.5x 1.5 Feet

LT control panel and LT cables

SITC of factory made LT control panel floor mounted cubical compartmentalized type suitable for 415V 3Phase 4 Wire The Panel shall be dust and vermin proof fabricated out of 2mm thick CRC sheet steel with front and back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC multi stranded Copper conductor cables of suitable sites thimbling and cable entry. Provided and fitted with following Incomer:- A 400Amp MCCB 4 Pole 50 KA (thermal magnetic release) 1no B Indicating lamp with control fuse – 1set C Digital multi functional meter (V,A,F)- 1set D CT’s- 400/5A- 1set Busbar:- TPN Aluminum bus bar of 600 Amp current carrying capacity Outgoing:- MCCB 250A 35KA 4 Pole (thermal magnetic release) 2no MCCB 200A 35KA 4 Pole (thermal magnetic release) 2no Changeover switch 4 Pole 250A - 1 no

SITC of factory made LT control panel floor mounted cubical compartmentalized type suitable for 415V 3Phase 4 Wire The Panel shall be dust and vermin proof fabricated out of 2mm thick CRC sheet steel with front and back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC multi stranded Copper conductor cables of suitable sites thimbling and cable entry. Provided and fitted with following Incomer:- A 200Amp MCCB 4 Pole 50 KA (thermal magnetic release) 1no B Indicating lamp with control fuse – 1set C Digital multi functional meter (V,A,F)- 1set D CT’s- 200/5A- 1set Busbar:- TPN Aluminum bus bar of 300 Amp current carrying capacity Outgoing:- MCCB 63A 25KA 4 Pole (thermal magnetic release) 5no

SITC of factory made LT control panel floor mounted cubical compartmentalized type suitable for 415V 3Phase 4 Wire The Panel shall be dust and vermin proof fabricated out of 2mm thick CRC sheet steel with front and back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC multi stranded Copper conductor cables of suitable sites thimbling and cable entry. Provided and fitted with following Incomer:- A 160Amp MCCB 4 Pole 50 KA (thermal magnetic release) 1no B Indicating lamp with control fuse – 1set C Digital multi functional meter (V,A,F)- 1set D CT’s- 160/5A- 1set Busbar:- TPN Aluminum bus bar of 600 Amp current carrying capacity Outgoing:- MCCB 40A 25KA 4 Pole (thermal magnetic release) 2no TPN MCB 40 A – 1no

Providing & laying of alminium armed cable 3.5 core of different sizes

SITC of 100 KVA 3 Phase Copper Wound outdoor type AVR Oil immersed ONAN Cooled complete with all fittings and first filling of fresh oil. Inout voltage range of 260-460 (Phase to Phase) Output voltage 415V Phase to Phase. Make: Assistant Engineer,/ Electric Field/ Anyother equivalent.

valley builders

BASHIR AHMED MIR