REPAIRS TO SUNKEN FLOORS INTERNAL SANITARY FITTINGS WOODEN/PVC DOORS ETC IN MD ACCN AND TECHNICAL AREA OF R AND DE E DIGHI AND ORDAQA KHADKI PUNE

Amount

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedding (but not backing) & removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L for 15mm thick Screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick (as backing coat) on fair faces of brick work or concrete sufaces in CM 1:3 complete all as specified and directed.

M&L for Vitrified ceramic tiles Light shade 9 to 10mm thick (square/ rectangular) polished area of each tiles size exc 0.11 sqm but n exc 0.36 sqm as in floors etc.,set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile not exceeding 0.09 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 450/ 600x300 mm thickness as per manufacture on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with & over backing coat of 10 mm thick plaster in CM 1:4 etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each complete all as specified and directed.

S&F factory made solid panel PVC shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stylies and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stylie & rails with sutailble PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per manufacturer's instructions & as directed.

All as per item no. 10 here in before but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter witth particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening all as per manufacturer's instructions & as directed.

S&F Aluminium, anodised barrel tower bolt 150 mm complete all as specified and directed.

S&F Aluminium handles fabricated type 150 mm complete all as specified and directed.

S&F Aluminium handles fabricated type 100 mm complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Mild steel cold rolled Butt hings 100 mm medium weight complete all as specified and directed.

S&F aluminium powder coated frame for doors, windows, partitions and ventilators with one or more rebates including necessary jointing cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium window and ventilator shutter fixed type / sliding type as directed without sash bar, aluminium section weighing 0.55 Kg/mtr including necessary jointing cleats, glazing clips rubber packing, anodised aluminium snap beading, screws, rollers, locks etc complete all as specified & as directed.

M&L for sheet glass ordinary quality 4 mm thick fix in Aluminium/ steel, window/vent shutter complete all as specified and directed.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares complete all as specified and directed.

S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed.

S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed.

S&F in repairs Aluminium alloy , anodised sliding door bolt with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm complete all as specified and directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repairs 25mm bore stainless steel 304 grade curtain rods with suitable fancy type brackets and fixed in position using stainless steel screws complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples (304 Grade) complete all as specified and directed.

S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

S&F in repair 25mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

S&F in repairs 450mm x 600mm PVC body cabinet Mirror and fixing to the wall with suitable screws etc complete all as specified and directed. Make: Prayag/ Shakti

M&L for brushing neat cement slurry with 3.0 kg of cement per sq. meter complete all as specified and directed.

M&L for rendering 15 mm thick in cement motor 1:3 with using water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately

M&L applying coat of industrial bitumen 85/25 at the rate of 1.20 kg/sqm including cleaning the existing plaster/concrete surfaces of sunken portion complete all as specified and directed.

Demolition of cement concrete exc 15cm thickness above ground floors (as in sunken floors) complete all as specified and directed.

M&L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in filling under sunken floors complete all as specified and directed.

Material and labour in repair for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L in repairs for Machine cut cudappa stone slab as in horizontal or vertical 20-25mm thick with & over cement screed base 10mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trap stone for gas connection pipe complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Taking down cement plaster from brick / concrete / stone surfaces including racking out joint, hacking for key and scrubing down with water etc all as specified and directed.

M&L for Dubbing out average 10mm thick on irregular face of walls in CM 1:4 complete all as specified and directed.

M&L for Preparation of old distempered surfaces of wall and applying one coat of oil bound distemper etc all as specificed and directed.

M&L for Preparation of old distempered surfaces of ceiling surfaces & applying one coat of oil bound distemper etc all as specificed and directed.

Complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and M&L for two coats of distemper oil emulsion over a coat of primer including wall care putty to make surface even and smooth, preparatory to distempering, priming plastered and other surfaces on existing plastered surface complete all as specified and directed.

M&L for Preparation of old distempered surfaces of wall and applying two coat of oil bound distemper as specified and directed by Engr-in-Charge.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc all as specified and directed.

M & L for one coat of cement base paint on walls including preparation of old decoreted surfaces complete all as specified and directed by Engr - In - Charge.

M&L for preparation of existing surface and applying one coat of weather proof exterior paint (Apex ultima or Dulux or equivalent) white or tinted over a coat of acrylic exterior primer incl nescessary scafolding all as specified and directed.

Removing of debries (Concrete debries, tiles etc) out side the MD Land (R&DE Dighi) complete all as specified and directed.

Taking down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Taking down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, chromium plated for iron pipe or for unions angle cock complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore three in one Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specified and directed.

S&F in repairs, vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, flush pipe for joining etc complete all as specified and directed.

S&F in repairs sink made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and as directed.

S&F in repair for vitreous China wash basin, white, flat back, size 580x450mm including necessary brackets, CP couplings, PVC waste pipes etc. complete all as specified and directed.

S&F in repair for vitreous China wash basin, white,counter type, size 550 x 425 x 180mm including necessary brackets,CP couplings, waste pipes etc. complete all as specified and directed.

Supply only for Pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore CP brass health faucet of 1.2m long including brass holders, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore CP brass two way bib cock, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair PVC floor trap/nahani trap incl stainless steel gratings, 75 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

S&F in repair Ball catcher with 8 mm dia steel ball and brass body and skirting plate including leting in and fixed complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised 30mm flap complete all as specified and directed.

S&F in repairs CP brass Urinal spreader with CP brass 15mm bore push cock, including brass connection pipe (suitable length) complete all as specified and directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new or old untreated steel surface of girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed

M/S JAYCONSTRUCTION CO

Mukund Engineers and Contractors