Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.9 LAccepted-AOC NEAR RELIANCE PETROL PUMP RAMGARH CANTT 829122 DIST RAMGARH JHARKHAND | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | ₹6.9 L Quoted ₹5.9 L | L-1 | Accepted-AOC L-1 |
| 2 | L-2₹6.0 L+₹9,800 (1.67%)Rejected-Finance MAIN ROAD RAMGARH CANTT 829122 | RAMGARH | RAMGARH | JHARKHAND | 829122 | ₹6.0 L+₹9,800 (1.67%) | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹6.0 L+₹15,560 (2.65%)Rejected-Finance CENTRAL COALFIELDS LIMITED OFFICE OF THE PROJECT OFFICER E M DEPARTMENT SAUNDA D BARKA SAYAL AREA | BOKARO | JHARKHAND | 825102 | ₹6.0 L+₹15,560 (2.65%) | L-3 | Rejected-Finance L-3 |
| Sl No | Description | Qty | Unit | Rajneesh Electricals L1 | M.k. Traders L2 | coalfields engineering works L3 |
|---|---|---|---|---|---|---|
| 1.00 | Cost of copper wire/strip 60 coils x 2.5 kg each coil.(18 swg) | 300 | KG | 1,240 ₹3,72,000 Lowest | 1,250 ₹3,75,000 | 1,260 ₹3,78,000 |
| 2.00 | Cost of spares like end cover, fan, grease cap etc. (4xhelper + 1xfitter + 1xwelder) (4x526 + 1x739 + 1x739) x 2days = 7164.00 | 2 | set | 7,500 ₹15,000 Lowest | 7,700 ₹15,400 | 7,800 ₹15,600 |
| 3.00 | Cost of insulating materials @ 15% of item No. 1 | 2 | JOB | 55,800 ₹1,11,600 Lowest | 56,250 ₹1,12,500 | 56,700 ₹1,13,400 |
| 4.00 | Cost of labour charge @ 15% of item No.1 | 2 | JOB | 55,800 ₹1,11,600 Lowest | 56,250 ₹1,12,500 | 56,700 ₹1,13,400 |
| 5.00 | Cost of fitting charge of both side bearing 2xhelper + 1x fitter + 1x welder / side 2x526+1x739+1x739 = 2530.00 /side. (Bearing 6218 departmental supply) | 4 | job | 2,550 ₹10,200 Lowest | 2,700 ₹10,800 | 2,750 ₹11,000 |
| 6.00 | Cost of complete fitting of the motor of all required spares like fan cover and setting as per requirement (4xhelper + 2xfitter + 1xwelder) (4x526 + 2x739 + 1x739) x2days =8642.00 | 2 | No. | 9,000 ₹18,000 Lowest | 9,300 ₹18,600 | 9,400 ₹18,800 |
| 7.00 | Painting of motor body completely double coat (1xhelper + 1xpainter + 1xHire spray gun) (1x526 + 1x868 + 1x350) x2days + 10L paintx300 =3488 + 10 x 300 = 6488.00 | 2 | No. | 6,600 ₹13,200 Lowest | 7,000 ₹14,000 | 7,100 ₹14,200 |
| 8.00 | Fabrication & repairing of grease cap of both sides of motor as per requirement (1xwelder + 1xfitter ) x2days + 1kg cast iron welding rod. (1x739 + 1x739) x2days + 3500= 6456.00 | 4 | No. | 6,800 ₹27,200 Lowest | 7,000 ₹28,000 | 7,040 ₹28,160 |
| 9.00 | Moulding of coils with DGC Glass 'H' insulation. | 120 | coil | 1,100 ₹1,32,000 Lowest | 1,130 ₹1,35,600 | 1,145 ₹1,37,400 |
| 10.00 | Less scrap value @ 60% of item no. 1 | 1 | Job | -2,23,200 ₹-2,23,200 | -2,25,000 ₹-2,25,000 | -2,26,800 ₹-2,26,800 |
Tender Value
₹6.5 L
EMD Value
₹8,200
Closing Date
2 Jun 2025, 5:00 pmClosed
PE(Electrical)
OFFICE OF PO CHP-CPP, Piparwar Area, CCL, PO - Bachra, Dist - Chatra, Jharkhand - 829201 CHP-CPP,PIPARWAR
Repairing/Rewinding of 02 No. 150 KW, squirrel cage induction motor with volt 3.3 KV make Toshiba RPM 1440 sr.no. 30048860M and sr.no. 30048861M installed at 2104 secondary and 2101 primary crusher under CHP/CPP,PPR.
2025_CCL_335976_1
PE/Elec/CHP/PPR/e-NIT/25-26/04
Open Tender
Electrical and Maintenance Works
Item Rate
20 days
OFFICE OF PO CHP-CPP, Piparwar Area, CCL
2 documents required · 2 mandatory
₹8,200
24 May 2026
22 May 2025
3 Jun 2025
22 May 2025
2 Jun 2025
22 May 2025
22 May 2025 - 29 May 2025
Amount
Cost of copper wire/strip 60 coils x 2.5 kg each coil.(18 swg)
Cost of spares like end cover, fan, grease cap etc. (4xhelper + 1xfitter + 1xwelder) (4x526 + 1x739 + 1x739) x 2days = 7164.00
Cost of insulating materials @ 15% of item No. 1
Cost of labour charge @ 15% of item No.1
Cost of fitting charge of both side bearing 2xhelper + 1x fitter + 1x welder / side 2x526+1x739+1x739 = 2530.00 /side. (Bearing 6218 departmental supply)
Cost of complete fitting of the motor of all required spares like fan cover and setting as per requirement (4xhelper + 2xfitter + 1xwelder) (4x526 + 2x739 + 1x739) x2days =8642.00
Painting of motor body completely double coat (1xhelper + 1xpainter + 1xHire spray gun) (1x526 + 1x868 + 1x350) x2days + 10L paintx300 =3488 + 10 x 300 = 6488.00
Fabrication & repairing of grease cap of both sides of motor as per requirement (1xwelder + 1xfitter ) x2days + 1kg cast iron welding rod. (1x739 + 1x739) x2days + 3500= 6456.00
Moulding of coils with DGC Glass 'H' insulation.
Less scrap value @ 60% of item no. 1
Total impact of GST for the purpose of CTC
M.k. Traders (BID ID -1155394)
coalfields engineering works (BID ID -1156954)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .