Construction of an interlocking road At Zone 2,Ward 47 Daheli Sujaanpur From Ram Chandra Diwakar to Kallu Mata Mandir, under the Cantonment Assembly Constituency,kanpur nagar

Excavation in foundation in ordinary soil (Loam,clay or sand ) including lift upto 1.50 m and lead upto 30m , including filling watering and ramming of excavated earth into the trenches and removal & disposal of surplus earth as directed by the Engineer-in-charge up to the distance of 30.00m from the foundation trench ... complete item.(S.I.-251-a)

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 1/2 meter (20'') depth and earth work in embankment to be in 20 cm (8'') layers including ramming and dressing the surface to required levels and slopes and also including 1.50 M (5 ft) lifts and 30 m (100 fit) lead the earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M (100 fit) distance as ditcted by the Engineer-i

Cement Concrete with 4cm gauge approved Stone Ballast, fine sand and cement in the proportion of 1:4:8 including supply of all material and labour, Tools & Plants etc. required for proper completion of the work.

M-150 brick work 1:4 cement coarse sand mortar in foundation …. Complete item

C.C 1:2:4 as in plain work….complete item (S.I- 279A)

12 mm thick plaster with 1:4 ....complete item

Construction of granular sub base by providing well graded material ,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotovator at OMC , and compacting with smooth wheel roller to achieve the desired density .

P/Laying of I - Shaped Interlocking tiles Rubber moulded 80 mm thick Precast Cement Concrete having plan dimension 200 mm X ( 160 mm + 120 mm ) with compressive strength not less than 30 Mpa and weight 5 kg (Specification confirming to IS : 15658-2006 )

R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in slab excluding supply of reinforcement and its cutting and bending , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work including cost of binding wire.

M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.