SPL REPAIR AN REWIRING OF ECHS POLYCLINIC BLDG NO P-165 AN T-4A AT BHDC, PROVN OF DRAIN IN 110 MED REGT AND ALUMINIUM WINDOW INCL ADDN/ ALTN TO TOILET, BATH, KITCHEN ETC IN MD OFFRS ACCN AT MANEKSHAW ENCLAVE AN URBAN VILLAGE UNDER GE (EAST) EAST DELH

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in any type of soil complete all as specified and directed.

Returning/ filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 M above the starting point complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , filling and mass concrete complete all as specified & directed.

M&L for cement concrete type B-1, 100mm thick 1:2:4 (20mm graded aggregate) complete all as specified & directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in copings and the like including weathering slightly rounded or chamfered angles and throating, including formwork to concrete surfaces all as specified and directed.

S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including demolition of existing RCC slab covers, complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (CM 1:4) finished even and fair complete all as specified and directed.

M&L cement concrete 1:2:4 type B-2 using 12.5mm graded stone aggregate as in surface channels all as specified and directed.

M&L for cement concrete type D-2 1:4:8 (Using 40mm Grade crushed stone aggregate) in bed to drain pipe 450 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete.

S&F Reinforced concrete pipes, 450 mm bore, class NP2, laid and jointed complete with collars as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

M&L for rendering 10mm thick CM 1: 4 on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for screed bed 15mm thick CM 1:6 for laying of floors finishes complete all as specified and directed

M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.16sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed coloured ceremic tiles sizes 600x300x 7mm thick tiles on vertical surfaces, such as skirting/dado ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.

Taking down shutter and refixing in same opening after easing and adjusting, area of shutter exc 1 sqm but nexc 2 sqm each complete all as spd

S&F 15mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and directed.

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make : Jaquar Continental CON-CHR-167 KNB or equivalent in Marc/ Kohler)

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) 'P' or 'S' Trap , with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S&F in repair Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10ltrs PVC valveless, syphonic ac-tion type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply only waste fitting 32mm dia , CP for WHB with long screwed shunks and nuts complete all as spd and directed

S&F in repair PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete

S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. (Make: Jaquar Cat Part No CON- CHR 1171N or equivalent in Marc/ Kohler/ Prayag)

S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed. (Make: Jaquar Cat Part No EOS-542A or equivalent in Marc/ Kohler/ Prayag)

S&F in repairs 15mm dia bib taps fancy type, CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed. (Make: Jaquar Cat Part No CON- CHR 047KN or equivalent in Marc/ Kohler/ Prayag)

S&F in repair 15mm bore angle valve chromium plated brass with flange complete all as spd & directed. (Make: Jaquar Cat Part No CON- CHR 059KN or equivalent in Marc/ Kohler)

S&F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as spd & directed. (Make: Jaquar Cat Part No CAN CHR 1151N or equivalent in Marc/ Kohler)

S&F CP health faucet with CP flexible pipe as per approved sample complete all as spd and directed. (Make: Jaquar Cat Part No ALD CHR 573 or equivalent in Marc/ Kohler)

S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete. (Make: Jaquar Cat Part No ACN- CHR 1111SM or equivalent in Marc/ Kohler)

S&F grating doom 100mm dia of PTMT complete.

S&F in repair viterous china white soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water complete

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and fair complete all as specified and directed.

M&L for two coats of oil emultion distemper on new plaster surfaces of wall over a coat of interior primer including prepration of surface complete.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area n exc 1.5 Sqm each complete all as spd

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each complete all as spd

S&F powder coated aluminium frame for windows and ventilators with one or more rebated incl jointing cleats for fixing etc complete all as specified

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 4.5 mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary frame work of 2 mm thick aluminium section, joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge. Note : The work will be executed at High rise bldgs and necessary T&P, scaffolding is deemed included in unit quoted rate.

S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) complete all as specified. Note : The work will be executed at High rise bldgs and necessary T&P, scaffolding is deemed included in unit quoted rate.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.

S&F Sheet glass, 5 mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including beading fixed nails complete all as specified and directed

S&F stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed

S&F and fabrication of wardrobe/ cup board made out of 18-19 mm thick PVC board of density 600 kg/cum laminated sheet on both sides incl PVC lipping/tape on exposed surface , color as approved by GE, complete all as specified and directed.

M&L sunkern floor treatment including prepration of concrete/plaster surfaces .and applying the following treatment complete all as specified. (a) Applying 1st course of bitumenous primer @ 0.4 kg/sqm conforming to IS-3384 over roof concrete surface . (b )Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180° C and applied @ 1.2 kg/sqm. (c ) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 150 mm on the width side overlap and 100 mm on long side overlap as per manufacturer instructions . The membrane has to be laid with LPG torch and overlap sealed and finished neat (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 kg/sqm.

M&L for rendering 15mm in cement mortar 1:4 mixed with WPC @ 3% by weight of cement or as per manufacturer's instructions(whicherver may be higher)to fair faces of brick or conrete surfaces finished even and fair complete all as specified and directed. (WPC sall be measured & paid for speparately )

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of cement primer on newly plastered surfaces of wall complete all as specified and directed.

Materials and labour for 75mm thick plain cement concrete (1:4:8) Type D2 using 40mm graded aggregate in sub base of floor complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and makinggood disturbed surfaces of walls, floors, etc all as specified and as directed.

Taking down the existing Exhaust fan/ Ceiling fan/Wall mounted fan of any make or any sweep from its position and refixing in position complete all as specified and as directed.

Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow and 1.5Sqmm FRLS PVC insulated unsheathed copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light / bell / fan point controlled by one way switch.

All as per item No. 59.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete.

All as per item No. 59.00 here in before but for one three pin, 5 Amp, socket out let on same board complete.

All as per item No. 59.00 here in before but point wiring with 1.5 Sqmm, multistranded, copper conductor cable, for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete.

All as per item No. 59.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete.

All as per item No. 59.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point and Geyser point on independent board with 4 Sqmm size earth conductor complete.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including surface PVC casing and capping ISI marked of suitable size and fittings such as tees, bends, elbow and 1.5Sqmm FRLS PVC insulated unsheathed copper conductor mulistranded earth wire, connecting to common earth dolly including PVC Flush Box, Cover plate with frame, and making good disturbed surface in CM 1:3 to match with existing surface for one light / bell / fan point controlled by one way switch.

All as per item No. 65.00 here in before but for one three pin, 5 Amp, socket out let on same board complete.

All as per item No. 65.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete.

Supply and Fixing of BEE five star rated Electric water heater (Geyser) white blue in colour capacity 10 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type fabricated with shock resistance ABS outerbody ,incoloy glass coated heating element of 2 KW, inner shell made up of stainless steel , automatic cutoff,manual tempreture setting , suitabel to withstand 8 bar pressue including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete with minimum two year warranty all as specified and directed.

S&F in replacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed.

S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement Modular Bell push 6A 1 module all as specified and as directed.

S&F in replacement Buzzer, Ding Dong AC. 230 volts, single pole all as specified and as directed.

S&F modular blanking plate, 1 Module complete all as specified and as directed.

S&F sub main wiring with 2 runs of 10 Sqmm FR single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 25 mm dia concealed PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 10 Sqmm FR PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F sub main wiring with 2 runs of 6 Sqmm FRLS, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm FRLS, PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia concealed PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 4 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

S&F in replacement Bldg security light fitting LED 25 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with beam angle of 120 degree used to enhance the luman output Height with Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 4 KV lumen Efficiency should ≥ 100 lumen/ watt in Cool day Light(5700K), Power factor>0.9, CRI (Ra) >70, System with Average life of 50000 Burning hours completewith electric connection with suitable size of PVC insulated copper wire including GI bracket 1.5 Mtr light grade 32 mm dia with clamps and bolts complete all as specified and directed.

Supplying, installation, testing & Commissioning of LED Post top 30 watt , IP65 elegantly designed spun aluminium and high grade aluminium , heat sink for efficient thermal managment , pole mounted posttop 30W with MS base provided to support the housing Power coated black treatment.

Supply, fixing and connecting in replacement recessed mounting back- lit LED 2X2, 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595x595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light (6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light (6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

S & F Metallic exhaust Fan 300 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed.

S & F Metallic exhaust Fan 450 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete.

Supply & fixing of ceiling fan , 5 star rating (White colour) 230 V, 1200 mm sweep, speed 340 RPM, having rod length 300 mm complete.

S&F in replacement modular Fan step regulator, 120W - 2 module complete.

Supply & fixing of Wall mounted fan (White colour) 230 V, 400 mm sweep,speed 1350 RPM complete.

Supply , Installation , Testing and Commissioning of Air Cooled inverter based Split AC unit with cooling function, Air Conditioner i.e electric driven single phase of capacity 2.0 TR, minimum 3 Star rating charged with Ecofriendly Refrigerent and comes with special health filter and all connected accessories and fixing of copper pipe & cable from indoor to outdoor with making suitable size of hole in any type of wall, including PVC drain pipe from indoor unit, Outdoor split AC hanging wall mounted/floor mounted stand and flxible PVC Casing pipe minimum 40 mm dia covered on all exposed copper insulated pipe line and PVC wire etc. complete all as specified and as directed by Engg-in-charge.

Supply and fix Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output Voltage stabilized at 230 Volt with accuracy of +2.5% and of capacity 5 KVA.

S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed.

M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mm bore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

S & F in replacement for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in replacement for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in replacement MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed.

S & F in replacement MCB SPN, 240 Volts, 63 Amps complete all as specified and directed.

S & F in replacement MCB SP, 240 Volts, 10 Amps complete all as specified and directed.

S & F in replacement MCB SP, 240 Volts, 16 Amps complete all as specified and directed.

S & F in replacement MCB SP, 240 Volts, 25 Amps complete all as specified and directed.

S & F in replacement MCB SP, 240 Volts, 32 Amps complete all as specified and directed.

S & F in replacement MCB SP, 240 Volts, 63 Amps complete all as specified and directed.

Dismantaling of the steel tubelar pole through manpower/ JCB properly with all connected items complete in all aspect with complete restoration of site in origial condition including removal of all associated hardware and accessories and deposite it to MES store all as specified and as directed by Engg-in-charge.

ASHUTOSH BUILDERS (BID ID -3274432)

Akhil Enterprises (BID ID -3274373)

M/S Rohit Enterprises (BID ID -3274446)

Vipul Construction (BID ID -3274558)

POONAM ENTERPRISES (BID ID -3277300)

Vishal Traders (BID ID -3277522)