Estimate for Repair and Renovation of Canal Rest House Abohar

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (CSR NO 16.20)

Preparation of plywood surface forpaintingincluding sand papering the surface andapplying filling with approved quality fillersconsisting of white lead, linseed oil,Varnish,and Chalk Mitti including fin ishing the surface torequired finish complete. (CSR NO 16.15)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work, metallic or plastered,concretesurface to give an even shade (CSR NO 16.17)

Scraping dismantling boulder masonry/concrete in cement (CSR NO 8.31 h (i)

Cement concrete 1:3:6 with stone ballast or shingle mixing by manual means ( CSR NO 10.12 a(i))

Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications (CSR NO 24.41 a )

Dismantling concrete Cement concrete plain 1:3:6 mix ( 8.6 c)

Conglomerate floor 25mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. using mechanical mixer for mixing of material ( CSR NO 14.8)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).Size 600x600 mm (CSR NO 14.113 a)

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.2 mm thick micro tegular edged semiperforated GFRG (Glass Fibre Reinforced Gypsum) false celing tiles of Size 595x595 mm

Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. brass liquid soap Container (CSR NO 36.67 a)

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-incharge ) complete in all respect..CP. brass towel rail 600 mm long (CSR NO 30.69 B i)

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-incharge ) complete in all respect.C.P brass towel ring square(CSR NO 30.69 B ii)

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-incharge ) complete in all respect. C.P. brass soap dish holder with glassdish 30.69 B iii)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete ISI designation no I (Size of door up to 700mm) (CSR NO 17.43 a)

Providing & fixing 4" stainless steel towerbolts ISI marked on door & window frames complete in all respect as per thedirections of Engineer-in-charge. (CSR NO 17.75 )

Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR NO17.76 )

Providing & fixing 8" stainless steel towerbolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR NO 17.77)

Providing & fixing 9" stainless steel handles ISI marked on door & window frames complete in all respect as per the directi ons of Engineer-in-charge.(CSR NO 17.70)

Dismantling concrete Cement concrete plain 1:3:6 mix

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). 455 x 610 mm rectangular clear opening RCC man hole cover with medium duty

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (CSR NO 30.97 a (i)

Providing & fixing in position on terrace (at all floor levels) HDPE tank cover for water storage tanks of approved make (to the approval of Engineer -in-charge) complete in all respect. (CSR NO 30.97 b(i)

Providing and fixing in position automatic brass Ball Cock in tanks plastic Ball Cock with rod and Plastic Ball . (CSR NO 30.96 A (ii)

First class burnt brick work laid in cement sand mortar 1:3 in first sto rey upto 4 metres above plinth level (CSR NO 11.10 )

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade (CSR NO 16.13 )

Scraping of White wash and colour wash (CSR NO 8.31 (a))

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint (CSR NO 16.18 )

Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut (CSR NO 30.8 (b)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (CSR NO 30.32 (iii)

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.vitreous chinaware standard white pedestal for wash hand basin. (CSR NO 30.43 (i)

Providing and fixing PVC Cistern 10 Ltr. Capacity ISI marked IS 7231:1994( size 32.5x47.6x15.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings complete.(CSR NO 30.6 (A)

upholstering Restuffing sofa 31.23 (b)

Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in?Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR NO 14.127)

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm ((CSR NO 30.47 a)

Providing & fixing in postion C.P. brass Sink Cock with swinging spout (wall mounted) of approved make (to the approval of Engineer-in?charge) complete in all respect. (CSR NO 30.48

Providing and fixing in position C.P elbow action pillar tap of approved make (to the approval of Engineer-in-charge) complete in all ((CSR NO 30.41 a) respect.

Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by manual means (CSR NO 10.6 b (i)

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M?35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in?Charge. (CSR NO 14.138)

Dismantling brick work tile, masonry or tile lining Dismantling dry brick work (CSR NO 8.5 (i)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (CSR NO 6.6)

Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead (CSR NO 31.1 (a)

Renewing glass panes with putty and nails wherever necessary Glass panes weighing 10.75Kg/sqm (CSR NO 31.5 b)

Washing Door Curtain up to 2.75mtr (CSR NO 31.22 (m)

Washing window Curtains (CSR NO 31.22 (n)

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (CSR NO 31.11 )

Flush/Ruled/struck or weathered pointing on tile brick work with cement mortor 1:3(1 cement:3fine sand (CSR NO 15.61 )

Extra bitumen painting at 0.69 Kg. per Sqm. (CSR NO 13.54 )

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. (CSR NO 13.55)

Dismantling brick work tile, masonry or tile lining in cement (CSR NO 8.5 B)

Any Other Item

The Whitestone Co-operative Labour and Construction Society Ltd.

APEX SHIELD VENTURE