CA No GE(H)-12/2022-23 REPAIR TO FENCING, BOUNDARY WALL OF OTM ACCN IN THE AOR OF AGE BR I UNDER GE HISAR AT HISAR MIL STN

Amount

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as directed.

Dismantling fencing wire mesh of any type or any description fixed to any type of fencing posts.

Dismantling galvanized steel barbed wire of any description fixed to any type of fencing posts. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion embedded in concrete, brick work, masonry etc. and making good disturbed ground all as directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete all as directed.

M&L for PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in cill, coping steps, seismic and other similar courses, lacing courses, parapet and railing upto 60cm ht, kneelers, kerb and like including weathering slightly rounded or chamfered angl and throating including necessary formwork, complete all as specified and directed.

M&L precast cement concrete (1:2:4 type B0 using 12.5mm graded stone aggregate) louvers and jallies, 25mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 all as specified & as directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.

All as per serial item No 12.00 here-in-before but except bricks. Note : Old serviceable bricks retrieved from serial item No. 1.00 here-in-before shall be used under this item.

M&L mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Gde E-165 (Fe 290) all as specified and directed.

All as per serial item No 14.00 here-in-before but except steel. Note : Old serviceable MS section retrieved from serial item No. 7.00 here-in-before shall be used under this item.

Supply only mild steel galvanized chain link fencing any size or type as directed complete all as specified.

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing & round bars shall be measured and paid for separately under relevant item of BoQ.

Supply only mild steel round bars as in line wire fixed to chain link fencing and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long and dia of neck not less than 10mm complete all as specified.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

All as per serial item No 20.00 here-in-before but except barbed wire. Note : (i) Old serviceable barbed wire retrieved from serial item No. 6.00 here-in-before shall be used under this item. (ii) Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

S&F mild steel framed work as in steel frames, chowkats, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rough cast finish plaster by applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified.

M&L for preparing the old decorated plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying two coats of cement base paint of approved shade/tint on wall surface to give uniform and smooth surface etc complete all as specified and as directed.

M&L GI wire netting 0.91 mm dia and 20mm mesh lathing to mettal studing in ceiling / chajja plaster including all laps and cutting waste etc complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for factory made 60mm thick machine pressed precast cement concrete coloured interlocking paver blocks glossy finish of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:4, complete, all as directed.

M&L for preparation of new concrete surfaces of Kerb stone etc over 10cm in width or girth and applying two coats of synthetic enamel paint of approved tint, all as specified & as directed.

Balaji Construction Co.

Shiva Constructin Co.

M/S KAVITA CONSTRUCTION

m/s krishna engineers1