Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 accepted | |
| 2 | L2₹42.4 L+₹5.6 L (15.1%)Rejected-AOC C 92 JAIN NAGAR RAILWAY ROAD MEERUT UP | L2 | Rejected-AOC Being L2 rejected |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Meerut Cantt
Garrison Engineer (South) Meerut Cantt The Mall Road Meerut Cantt Distt Meerut
PROVN OF 05 TOILET WITH SEPTIC TANK AND SOAKAGE WELL FOR IDSR AND SPL REPAIR TO BLDG NO P-174 (COOK HOUSE AND DINING HALL) OF INF BDE SIG COY, BLDG NO P-170 OFFICE COMPLEX INF BDE SIG COY AND OTM ACCN BLDG NO P-302 (MT GARAGE) AND P-303 (WASHERMAN
2022_MES_523039_2
GE/MRT/S/8934/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Meerut Cantt
Please prefer tender documents
11 documents required · 11 mandatory
₹500
GE (South) Meerut
₹97,000
Yes
3 Sept 2022
16 Jun 2022
22 Jul 2022
16 Jun 2022
20 Jul 2022
24 Jun 2022
17 Jun 2022 - 20 Jun 2022
Amount
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified and directed.
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed.
Taking down of shutter of any description exc 1 Sqm & n.exc 2 sqm each complete all as specified and directed.
Supply and fix Solid PVC door frame plain colour of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square fixed with rawl plug tube as per specification and drawing complete all as specified and directed.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to get with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed.
Dismantling of steel windows from any location and in any position and removing from site complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Supply and fix aluminium anodized window double shutter Glazed & gauged provided with galvanized mild steel wire cloth nominal dia of wire 0.56 mm and average width of aperture 1.18 mm along with aluminiumanodised grill 15 micron type DG-117 size of frame 125 mm x 44.5 mm of 18 gauge with 15 micron anodizing aluminium anodised section size of shutter top bottom and side rail 44.5mm x 44.5 mmx18 guage & 5.00 mm thick plain sheet glass to be fixed in glazed portion stainless steel hooks & eye 150mm long (01 No is each leaf) to be provided as stay complete including necssary jointing cleats, glazing clips, rubber packing anodized aluminium snap beading screws anodized aluminium fittings such hinges type B-21 100mm long (02 Nos for each leaf) suitable handle (01 No for each leaf) and 100mm aluminium tower bolt (2 Nos in each leaf) complete all as specified and directed including taking down window frame, any size complete all as specified and directed Make: Jindal/Hindalco/Indal or equivalent make as specified in PS.
Supply and fix aluminium anodized powder coated door shutter with frame including joining cleats and fixing accessories such as hinges handle and locking arrangements etc size of long rail stiles and bottom rail shall be 110x44.5 mm and top & centre rail shall be 85x44.5 mm thickness of aluminium section shall be 18 gauge with 15 micron anodizing top and bottom panel shall be provided with 5.00 mm thick plain sheet glass or 12mm thick PVC sheet best quality including locking arrangement (with mortice lock) including taking down door shutter with chowkat or frame, any size complete all as specified and directed Make: Jindal/Hindalco/Indal or equivalent make as specified in PS.
Material and labour preparation of old painted wooden surfaces of any description, not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed
Supply and fix steel ventilators top hung shutter including with box type hinges, steel peg stay and glazing bar complete all as specified & directed
Supply and fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples in steel widows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12x5mm complete all as specified and as directed. (Note : Removal of steel window shutter including refixing in same location where necessary will also included in quoted rate.)
Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads complete all as specified and directed.
Supply and fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc 0.50sqm each pane complete all as specified and directed.
Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 105x60mm made out of 1.25mm MS sheets including one shop coat of primer complete all as specified and directed.
Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 125x60mm made out of 1.25mm MS sheets including one shop coat of primer complete all as specified and directed.
Supply and fix 2nd class H.W panelled shutters 35mm thick (3 panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial face veneering both side, size of rail and steel as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.
Supply & fix 35mm thick glazed and skeleton shutter (3 Panel) for doors of second class hard wood open rebated and prepared to receive glass, gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/gauze etc. sizes of member of shutters as specified in SSR Part-I, clause 8.24 (a) complete all as specified & directed.
Supply & fixing, mild steel sliding door bolt type/plate type, stove enamelled black with bright bolt 16mm dia 250mm long with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fix 100mm long stainless steel butt hinges heavy duty complete all as specified and directed.
Supply and fix 150mm long extruded aluminium anodised handles fabricated type complete all as specified and directed.
Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed
Material & labour for one coat of synthetic enamel paint on old primed steel surface of any description over 10cm width or girth complete all as specified & directed.
Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
Supply and fix 150 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt 12mm dia and fixed complete all as specified all as directed
Supply and fix 150 mm mild steel pressed handles, oval type, stove enamelled black complete all s specified and directed
Supply and fix butt hinges 100mm long medium weight cold rolled mild steel and fixed complete all as specified & directed
Supply and fix 150mm long MS helical spring fixed by welding with MS door frame complete all as specified and directed.
Supply and fix 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
Material and labour preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified & directed
Material and labour preparation of old painted wooden surfaces of any description, not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed
Material and labour for PCC(1:2:4) Type B-0 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating and form work required complete all as specified and directed.
Dismantling, floor tiling / kota stone flooring including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.
Demolition of cement concrete of ground floor n exc 15 cm in depth in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.
Supply and fix 5mm thick prelaminated coloured PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC partitions inclusive of solvent sement and fixing at site.
Supply and fixing in repair anodised aluminium snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weith not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as specified and directed by Engr-in-charge.
Material and labour for 4 mm thick Armstrong ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coats of white wash including preparation of surface complete all as specified and directed by Engr-in-charge.
Taking down / removal of wall tiling, terrazzo topping and kota stone from vertical surface any type incl cement mortar bedding upto brick surface for new tile work and removing rubbish off the premises complete all as specified & directed.
Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for sub base flooring complete all as specified and directed.
Material and labour non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM (1:4) complete all as specified and directed Make: Kajaria/Somany/Orient or equivalent make as specified in PS.
Material and labour non - skid ceramic coloured tiles 7 to 8 mm thick area of each tile of size 600 x 100mm made from 600 x 600mm tile in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10mm thick screed bed in CM (1:3) complete all as specified and directed Make: Kajaria/Somany/Orient or equivalent make as specified in PS.
Material and labour for glazed ceramic coloured tiles (premium quality) of size 450X300X7 mm thick as in skirting/dado set, jointed in neat cement slurry and pointed in white/coloured cement to match, laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed Make: Kajaria/Somany/Orient or equivalent make as specified in PS.
Supply and fix 60 mm thick machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigment complete all as specified and directed Make: Tulip/Mehtab or equivalent make as specified in PS.
Material and labour for 16-18mm thick machine cut prepolished Udaipur green slab flooring on cooking platform laid over 15mm thick screed laid in cement mortar 1:4 laid and jointed with grey cement mixed with pigment to match the shade of slab and making holes for gas pipe including moulding to exposed edges of slab complete all as specified and directed.
Material and labour for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges,complete all as specified and directed.
Material and labour machine cut kota stone slab flooring 20-25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror polishing complete over and including screed bed or bedding layer of mortor 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.
Material and labour kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick screed bed in CM(1:4) and jointed with grey cement slurry mixed with pigment to match including grinding and mirror polishing complete all as specified & directed.
Material and labour non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.16sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM (1:4) complete all as specified and directed.
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed
Material and labour brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
Material and labour brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified & directed
Supply and fix in repair 20 mm dia PTMT ball valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix long body bib taps brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specfied and directed.
Supply and fix in repair 15 mm dia concealed stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union fixed complete all as specfied and directed.
Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fix in repair 15 mm dia stop cock / angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union fixed complete all as specified and directed Make: Pearl/Cera/Hindware or equivalent make as specified in PS.
Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white as approved incl ball valve and handle,32 mm dia PVC flush pipe complete all as specified and directed Make: Pearl/Parryware/Hindware or equivalent make as specified in PS.
Supply and fix in repair 125mm size brass CP shower rose with or without swivel joints complete all as specified and directed
Supply and fix CP brass soap dish of 160x160x90 mm complete all as specified and directed.
Supply and fix fancy type glass corner shelf made of not less than 5.5mm thick toughned glass of size 250mm x 250mm fixed with CP brackets complete all as specified and directed
Supply & fixing in repair PVC connections of 600mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed Make: Shakti/Prayag/Pearl or equivalent make as specified in PS.
Supply & fix in PVC connections of 450mm long of suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
Cutting chases in brick walls incl pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.
Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed.
Supply and fix tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed.
Supply and fix tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore complete all as specified and directed.
Supply and fix triple layer 500 Ltrs capacity white colour rotational moulded polyethylene water storage tanks three layers (cylindrical vertical with closed top) including nipple nuts and washers for fixing inlet,outlet/washout pipes and air vent pipes and including dismantling or exesting water tanks of any type & removing complete all as specified and directed Make: Dhara/Polyplast/Sintex or equivalent make as specified in PS.
Material and labour for pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.
Supply and fix in repair brass chromium plated towel rail D type 600 mm long as a approved quality.complete all as specified and directed.
Material and labour supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed
Supply and fix gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.
All as per item No 74.00 above but fixed in repairs complete all as specified and directed.
Supply & fix in repair 25mm dia stainless steel curtain rod of approved finish of superior quality including fancy type knobs at both ends, fancy type brackets for supports etc complete all as specified and directed.
Material and labour for repair of overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish incl all necessary formwork complete all as specified and directed.(height of work to be considered above 3.5m and upto 7m from FFL of ground floor. (Note : Wherever reinforcement is required the same is do be provided and will be paid separately under relevent item)
Dismantling of roof treatment including brick tiles and mud phuska and removing the debris from site complete and cleaning the roof with water complete all as specified and as directed.
Material & labour cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.
Material and labour for 40 mm thick (average thickness) PCC 1:2:4 type B-1 , using 20 mm graded stone aggregate as in padding on roof finished the surface even and fair without using extra cement complete all as specified and directed
Material and labour for screed bed or bedding layer of mortar, 20mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with liquid water proofing @ 200ml per 50 kg of bag of cement including finish the surface even and smooth without using extra cement complete all as specified and directed. (Note:- water proofing liquid shall be measured and paid separately).
Material and labour rendering 10mm thick in CM 1:4 as in ceiling and finished even & smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Material and labour preparing newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.
Material and labour 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.
Material and labour 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.
Material and labour for preparing newly plastered surfaces of walls and applying two coats of oil emulsion distemper using roller over one coat of wall care putty of 2mm thickness complete all as specified and directed (Note: Application will be done with roller thrown.)
Material and labour for preparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint (weather proof) on newly plastered wall surface over a coat of primer over two coat of wall care puty of 1.00-1.50mm thick complete all as specified and directed. (Note :- Application will be done with rollers through authorised applicator of company)
Material and labour for preparing old plastered surfaces of walls and applying two coats of exterior emulsion paint (weather proof) on newly plastered wall surface over a coat of primer over two coat of wall care puty of 1.00-1.50mm thick complete all as specified and directed. (Note :- Application will be done with rollers through authorised applicator of company)
Material and labour complete removal of existing treatment by mechanical and preparation of surface by two coat of oil emulsion distemper using roller on old plastered wall surface over a coat of primer and wall care putty of 2mm thickness complete all as specified and directed
Material and labour preparation of old decorated plastered surfaces of ceiling and applying one coat of white washing complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls with necessary fittings such as clamp etc. complete all as specified & directed Make : Kisan/Finolex/Prince or equivalent make as specified in PS.
All as per item No 92.00 above but fixed in repairs complete all as specified and directed Make : Kisan/Finolex/Prince or equivalent make as specified in PS.
Supply and fix PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed Make : Kisan/Finolex/Prince or equivalent make as specified in PS.
Supply and fix PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed Make : Kisan/Finolex/Prince or equivalent make as specified in PS.
Supply and fix PVC (SWR) bends of 110 mm bore dia complete all as specified & directed Make : Kisan/Finolex/Prince or equivalent make as specified in PS.
All as per item No 96.00 above but fixed in repairs complete all as specified and directed Make : Kisan/Finolex/Prince or equivalent make as specified in PS.
Material and labour PCC 75 mm th 1:3:6 type C-2 (using 40mm graded aggregate) as in plinth protection/path paving etc surface finished even and smooth without using extra cement complete all as specified & directed.
Demolition of reinforced cement concrete of any description & in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Supply and fix mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.
Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc. one brick complete all as specified and directed.
Supply and fix mild steel CP grating 100/125mm dia incl waste hole where required at site complete all as specified and directed.
Supply and fix pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Material and labour for mild steel framed work with hollow rectangular section (Weight to be measured at site per Rm) as in framework for chajja / sun shade etc at any height incl all necessary welding and fixed to wall by fastener and rawl plug complete all as specified and directed.
Material and labour for two coat of weather paint of red colour Apex (Ultima) or equivalent after preparation of surface complete all as specified and as directed.
Supply and fix in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and PVC waste pipe 50mm dia with pressure rating 6 Kgf/Sq cm including MS cantilever brackets of 40 x 40 x 6mm angle iron and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make: Nirali/Silver Shine/Diamond or equivalent make as specified in PS.
Supply and fix stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.63mm thick stainless steel sheet after taking down old one complete all as specified and directed Make: Nirali/Silver Shine/Diamond or equivalent make as specified in PS.
Supply and fix vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste but incluing brackets, CP waste couping , PVC Waste pipe 32mm dia etc complete all as specified and directed. Make: Cera/Parryware/Hindware or equivalent make as specified in PS.
Supply & fix in repairs 50 mm bore PVC (SWR) pipe in any length fixed to walls with clamps bends and laid in floors etc. complete all as specified and directed.
Supply and fix mild steel frame work fixed in wall as in cooler stand Nos in PCC 1: 2: 4 Type B-1 using 20 mm graded stone aggregate incl cutting holes 4 Nos for each cooler stand complete all as specified and directed
Supply and fixed of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved including ball float valve and handle, 32 mm dia PVC flush pipe complete all as specified and directed Make: Cera/Parryware/Hindware or equivalent make as specified in PS.
Supply & fixing vitreous china squatting pan 'Orissa' pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and trap, including connections to trap, and to flush pipe, anti -syphonage pipe, etc. complete including making good to floor complete all as specified & directed Make: Cera/Parryware/Hindware or equivalent make as specified in PS.
All as per item No 114.00 above but fixed in repairs complete all as specified and directed.
Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed
Material and labour for cement concrete 1:4:8 type D-2 using (40mm graded crushed atone aggregate) as in sub base of floor finishing surfaces of concrete topping even and rough to receive the topping layers etc complete all as specified and directed
Material and labour for cement concrete 1:2:4 type B-2 using (40mm graded crushed stone aggregate) 100 mm thick as in floor finishing surfaces of concrete topping even and fair (without using extra cement) etc complete all as specified and directed
Material and labour forming 12 mm thick expansion joint filled with pre formed bituminous filler and top 30 mm primed and sealed with sealing compound Grade A complete all as specified and directed.
Supply only liquid water proofing admixture complete all as specified and directed.
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
Treating the top surface of filled earth at the rate of 7.50 litres of emulsion per square metre of surface complete all as specified and directed.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
Material & labour for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.
Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.
Material and labour for use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
Material and labour for use and waste form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.
Material and labour of form work to sides and soffits of beams lintels etc for rough finished flat surface of cone complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete complete all as specified and directed.
Material and labour for form work to the edge of concrete flat n. exc 200 mm thick complete all as specified and directed.
Material and labour for providing reinforced cement concrete , M-25 design mix (using 20 mm graded crushed stone aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete including necessary form work complete all as specified and directed.
Material and labour for providing reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.
Material and labour for providing reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregates) as in beams, lintels over 1.5m span etc complete all as specified and directed.
Material and labour for providing reinforced cement concrete M-25 Design Mix , 1:2:4 (using 20 mm graded crushed stone aggregates) in roof slabs supported on complete all as specified and directed.
Supply only liquid integral water proofing compound complete all as specified and directed.
Material and labour for rendering 5 mm thick plastere in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base floor, finished even and rough to receive floor topping all as specified and directed.
Material and labour for flat iron hold fast 25mmx6mm welded to iron door frame complete all as specified and directed.
Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.
Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.
Supply and fix for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.
Supply & fix steel windows or ventilators fixed type, complete all as specified & directed.
Supply & fixing mild steel framed work such as grills or framed guard bars with end of bars shouldered or reveted or forged into spike, and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.
Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed Make: Cera/Prayag/Pearl or equivalent make as specified in PS.
Supply & fix PVC ball valves, high pressureof PTMT with epoxy coated aluminium rod and rough density plastic ball screwed for iron pipe 20mm bore complete all as specified & directed.
Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed Make: Cera/Prayag/Pearl or equivalent make as specified in PS.
Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified Make: Cera/Parryware/Hindware or equivalent make as specified in PS.
Material & labour for construction of septic tank 25 users capacity, exc in ordinary soil, foundation conc in PCC 1:2:4, brick work in CM 1:4 , RCC slab and covers in RCC M-25 design Mix 1:2:4 including RCC precast manhole cover having 6 mm plate embedded all around /fibre reinforced cover with angle iron frame , CI Vent pipe complete all as shown in TD Drg ( TD/217 sheet 1/7 to 7/7 of HQ CEBZ ) complete all as specified and directed.
Material & labour for construction of soakage wells, excavated. in ordinary soil, foundation PCC 1:3:6 walls of honey combed and solid brick in cement mortar, RCC slab in M25 design mix, filling work with brick bats, complete of size 1.80 m dia x 3.00m effective depth complete all as shown in TD Drg ( TD/309 sheet 1/4 to 4/4 of HQ CEBZ ) complete all as specified and directed.
Supply and fixing MCB, SPN, AC, 240 volts "C" curve capacity of 40 Amps, 10kA and making connection complete all as specified & directed.
Supply and fix exhaust fan 300 mm , single phase, 50 Hz with double bale bearing heavy duty all with all incluidng all fixing material all as per directed by Engr-in-Charge Make: Usha /Havells/Crompton or equivalent make as specified in PS.
Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .
Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of medium grade of size 20mm dia or higher complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly for One light point controlled by one, one way switch 05/06 Amps complete all as specified and directed.
All as per serial item No 154.00 above but for one ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.
All as per serial item No 154.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.
All as per serial item No 154.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.
All as per serial item No 154.00 above but with 2.5 Sqmm Nominal cross sectional area copper conductor cable, FRLS for one 15/16 Amps socket outlet point on independent board.
Supply and fix switch piano flush type, 5/6 Amp single pole, one way 240 volts complete all as specified and directed.
Supply and fix socket outlet 5 pin, 05/06 Amp flush type 240 volts complete all as specified and directed.
Supply and fix socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed .
Supply and fixed LED security light fitting 45 watt pressure die cast housing with toughened glass and high power LEDs with secondary protection with IP65 protection, complete with driver, including provisson of 32 mm bore ight grade GI tube mounting bracket 0.9 Mtr long made to shape bend to 140 degree in L shape and fixed to wall means of 02 Nos 40 x5 mm flat iron clamps nuts, bots and washers etc and provision of weather proof PVC insulated copper conductor cable 2.5Sqmm 3 core as required for connection all as specified and directed. Make- Crompton Model No Freedom Neo, Ordering Code LSTS-45-CDL-M or equivalent Bajaj/Havells/Surya
Supply and fix switch piano flush type, 15/16 Amp single pole, one way 240volts complete all as specified and directed.
Supply and fix stepped type electronic fan regulator flush AC, 230 volts, ISI marked with and including connector complete all as specified and directed .
Supply and fix lamp holder (Angular/Straight), insulated body, with back plate for batten fitting all as specified and directed.
Supply and fixing LED lamp 9/10Watts, CDL, with star rating all as specified and directed M
Suppy and fix surface/wall moundted LED Batten 20Watt polycarbonate housing integrated type having integrated driver complete with all accessories and fixing material all as specified and directed Make: Havells/Wipro/Crompton/Surya or equivalent make as specified in PS.
Supply and fixing LED tube light fitting 9/10 watt surface mounted, with extruded polycarbonate, integrated lamp & driver, with opal diffuser and decorative end plates complete with acessories all as specified and directed
Supply and installed LED security light fitting 1x25 Watt luminaries , die cast aluminium housing comprising high power with PC cover with LED driver, IP-66 protection complete including provisson of 32 mm bore light grade GI tube mounting bracket 1.2m longmade to shape bend to 140 degree in L shape and fixed to wall by means of 02 Nos 40x5mm flat iron clamps nuts, bolts and washers etc and provision of weather proof PVC insulated copper conductor cable 1.5Sqmm 3 core as required for connection complete all as specified and directed Make: Crompton/Wipro/Havells or equivalent make as specified in PS.
Supply and fix in replacement of wall mounted polycarbonate fancy light suitable upto 23W LED bulb complete all as specified and directed Model No : Comet 30575 Make : Phillips or Equivalent in Havells/Crompton/Wipro
Supply and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 Watt, complete with all acessoires all as specified and directed. Cat Part No : LBHP-10-CDL Make : Crompton or equivalent in Wipro/Crompton
Supply and fix of ceiling rose, 3 terminal polycarbonate isolated body complete all as specified & directed .
Taking down carefully unserviceable sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white/colour washing/distempering etc to match the existing complete all as specified and directed by Engineer-in-Charge.
Material and labour for sub main wiring with 2x6.00 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 6.00 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x6.00 sqmm wire and one 6.00 sqmm earth wire shall be measured as one unit length )
Material and labour for sub main wiring with 2x2.50 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 2.50 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x2.50 sqmm wire and one 2.50 sqmm earth wire shall be measured as one unit length )
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as directed .
Supply and fixing sheet metal enclosure double door, triple pole and neutral, AC, 415 volts, 4 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge. Make: Legrand/Havells /ABB / Schneider or equivalent make as specified in PS.
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge. Make: Legrand/Havells /ABB / Schneider or equivalent make as specified in PS.
Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed Make: Legrand/Havells /ABB / Schneider or equivalent make as specified in PS.
Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed Make: Legrand/Havells /ABB / Schneider or equivalent make as specified in PS.
Supply and fix isolator 4 pole 'B' series 63 Amps capacity AC 415V, 10KA complete all as specified and directed Make: Legrand/Havells /ABB / Schneider or equivalent make as specified in PS.
Supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/ fixing on wall/ under road crossing through protection pipe etc including taking out old LT cable complete all as specified and directed.
Supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc including taking out old LT cable complete all as specified and directed.
Supply/laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.
Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth in soft/ loose soil for foundation n.exc 10 Sqm on plan or laying cable including levelling of bottom surface to required level getting out complete all as specified and directed.
Material and labour for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hand punning complete all as specified and directed.
Material and labour for contineous brick edging with width equal to the length of the brick of whole sub class 'B' bricks laid on edge for protection of cable complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.
Removing surplus excavated materials to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point all as specified and directed.
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. (Note- After completion of work if desired result of earthing is not obtained the earthing shall be redone without any extra cost to Govt.)
Rajneesh Jain
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .