Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹14.6 L+₹1.1 L (7.83%)Rejected-Finance | L2 | Rejected-Finance REJECTED | |
| 3 | L3₹14.7 L+₹1.2 L (8.89%)Rejected-Finance | L3 | Rejected-Finance REJECTED | |
| 4 | L4₹15.0 L+₹1.5 L (11.3%)Rejected-Finance RAILWAY COLONY NOWGAM SRINAGAR JAMMU AND KASHMIR 190015 | BUDGAM | JAMMU AND KASHMIR | 190015 | L4 | Rejected-Finance REJECTED | |
| 5 | L5₹18.3 L+₹4.8 L (35.3%)Rejected-Finance YADIPORA PHALHALLAN TEH PATTAN DISTT BARAMULLA J K | PATTAN | BARAMULLA | JAMMU AND KASHMIR | 193121 | L5 | Rejected-Finance REJECTED |
Tender Value
₹16.7 L
EMD Value
₹33,338
Closing Date
29 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS
SPL REPAIR TO ROAD FROM MAIN GATE TO NALA POST OF 519 ASC BN AT PATTAN UNDER GE 969 EWS
2024_MES_640096_1
CWEK-68/2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
GE 969 EWS
Class E Category a v
6 documents required · 6 mandatory
₹500
GE 969 EWS
₹33,338
HQ 133 WORKS ENGRS
24 Apr 2024
1 Feb 2024
8 Mar 2024
1 Feb 2024
29 Feb 2024
16 Feb 2024
1 Feb 2024 - 9 Feb 2024
10 Feb 2024
Amount
M & L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sq m in area not exc 400 sqm, Exc 50 mm and n exc 100 mm deep, complete all as specified and as directed by Engr-in-Charge.
All per Ser item No 02 here-in-before but except material and in two layers of 7.5 cm thick (Consolidated thickness), complete all as specified and as directed by Engr-in-Charge. Note:- Old material retrieved from Ser item No 01 here-in-after shall be r
All per Ser item No 02 here-in-before but except material and in two layers of 7.5 cm thick (Consolidated thickness), complete all as specified and as directed by Engr-in-Charge. Note:- Old material retrieved from Ser item No 01 here-in-after shall be reused.
Material and labour for preparation of old black top road surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc, complete all as specified and as directed by Engr-in-Charge.
Material and Labour for premixed bituminous macadam (consolidated thickness 75mm or less ) laid / rolled and compacted to required gradient and camber and gradiant using mechanical paver and rolled with 8 to 12 Tonne capacity power road roller to uniform smooth surface using binder content of 4% by weight of total mix using paving bitumen of grade (VG-30) complete all as specified and as directed Note- (i) Hot mix plant of adequate capacity shall be used for heating and mixing of contituents for preparation of bituminous macadam and the same shall be laid with mechanical sensor paver am as specified. (ii) Over newly provided bituminous macadam surfaces, further bituminous work, if ordered, shall: provided simultaneously after provision of bituminous macadam & no separate payment for provision of tack coat for bonding between the bituminous macadam & further bituminous work necessiated due to the time period gap or otherwise shall be made for separately. (iii) The cost of all the above aspects shall be deemed to be included in the quoted rates of above item. (iv) The design mix shall be carried out from the Zonal lab/ Govt approved lab/Govt Engr College as approved by GE and design mix shall be got approved by GE before incorporation in work and testing charges shall also be borne by the contractor. (v) The contents of bitumen specified is the maximum content and in case, the quantity of bitumen required is less as per the approved design mix, the minus price adjustment for less quantity of bitumen shall be made at the rate of Rs 50 per Kg. (vi) Bituminous macadam shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE complete all as specified and as directed by Engr-in-Charge.
Repair to pot holes any depth, not exceeding 1.00 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal and well ramming including supply of road metal and making good by applying tack coat with bituminous primer (VG@ 5Kgs per 10 sqm, putting in Bituminous premeix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder contents of paving Bitumen binder (VG-10) by weight of total mix, mixed in fully auto hot mix plant and laid with mechanical paver rolled and compacted to required camber and gardient with 8 to 12 tonne power roller, complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of old black top road surface & WBM Surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc, complete all as specified and as directed by Engr-in-Charge.
M&L applying evently a priming/tack coat with bituminous primer usingpaving bitumen og grade VG10@ 5Kg/10 Sqm on existing black top for below bituminous macadam surfaces incl preparation complete all as specified and as directed by Engr-in-Charge.
M&L applying evently a priming/tack coat with bituminous primer usingpaving bitumen og grade VG10@ 10Kg/10 Sqm on existing black top for below bituminous macadam surfaces incl preparation complete all as specified and as directed by Engr-in-Charge.
Material and labour for laying bituminous premix semi dense asphaltic concrete 25mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 8 to 12 tonne capacity power road roller rolled to uniform smooth surface ,complete all as specified and as directed. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses. (iii) Hot mix plant of adequate capacity shall be used for heating and mixing of aggregates and binder (bitumen) for bituminous carpet. Premixed carpet shall be laid in single layer laid with mechanical sensor paver all as specified and directed. (iv) Over newly provided bituminous macadam surfaces, further bituminous work, if ordered, shall: provided simultaneously after provision of bituminous macadam & no separate payment for provision of tack coat for bonding between the bituminous macadam & further bituminous work necessiated due to the time period gap or otherwise shall be made for separately. (v) The cost of all the above aspects shall be deemed to be included in the quoted rates of above item. (vi) The design mix shall be carried out from the Zonal lab/ Govt approved lab/Govt Engr College as approved by GE and design mix shall be got approved by GE before incorporation in work and testing charges shall also be borne by the contractor. (vii) The contents of bitumen specified is the maximum content and in case, the quantity of bitumen required is less as per the approved design mix, the minus price adjustment for less quantity of bitumen shall be made at the rate of Rs 50 per Kg as decided by GE complete all as specified and as directed by Engr-in-Charge.
Material and labour for laying bituminous premix semi dense asphaltic concrete 40mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 8 to 12 tonne capacity power road roller rolled to uniform smooth surface ,complete all as specified and as directed. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses. (iii) Hot mix plant of adequate capacity shall be used for heating and mixing of aggregates and binder (bitumen) for bituminous carpet. Premixed carpet shall be laid in single layer laid with mechanical sensor paver all as specified and directed. (iv) Over newly provided bituminous macadam surfaces, further bituminous work, if ordered, shall: provided simultaneously after provision of bituminous macadam & no separate payment for provision of tack coat for bonding between the bituminous macadam & further bituminous work necessiated due to the time period gap or otherwise shall be made for separately. (v) The cost of all the above aspects shall be deemed to be included in the quoted rates of above item. (vi) The design mix shall be carried out from the Zonal lab/ Govt approved lab/Govt Engr College as approved by GE and design mix shall be got approved by GE before incorporation in work and testing charges shall also be borne by the contractor. (vii) The contents of bitumen specified is the maximum content and in case, the quantity of bitumen required is less as per the approved design mix, the minus price adjustment for less quantity of bitumen shall be made at the rate of Rs 50 per Kg as decided by GE complete all as specified and as directed by Engr-in-Charge.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed by Engr-in-Charge.
Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x20mm with PAMA striplens reflector of model No.DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Solar Cat eye aluminum alloy shall (100% water proofing design cording to 65) of size 125x125x25 mm, (Shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 wall one NI-ed rechargeable battery (1.2V/1600MA) consisting ofg super bright LED with 10,000 to 18,000 med completed as per manufactures instructions etc all as specified and directed complete all as specified and as directed by Engr-in-Charge.
Material and labour for marking lines/strips on roads/pavement with thermo plastic paint (tint as approved by GE)! by hot mixing method as per IS specification, heating with gas, to achieve minimum uniform thickness 1.5 mm using painting materials @ 6.5Kg/Sqm and glass beads 250 gm/Sqm complete all as specified and as directed by Engr-in-Charge. Note: The paint shall be 1st quality of Make : RELIANCE/BERGER/ASIAN
M/S GHULAM MOHIUDDIN RATHER
SHALIMAR BUILDERS
AHMED CONSTRUCTIONS AND INFRA PVT LTD
M/S MANZOOR AHMAD YATOO
M/S GHULAM QADIR WANI AND SONS
M/S SUSHEEL STEEL INDUSTRIES BARAMULLA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .