MISCELLANEOUS CIVIL & MECH. WORK AT HISAR TERMINAL

EXCAVATION IN EARTH — Excavation for foundation upto required depth below existing ground level in any type of soil except hard rock. Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, trenches/plinth beam etc compacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete. The measurement of the excavation would be based on actual depth of excavation with applicable rate for different depths.

EXCAVATION- HARD ROCK — Excavation for foundation upto required depth below existing ground level in concrete road by chiselling / pneumatic drilling . Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the job to restore the original state of the ground and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including curing, watering and compaction and complete . The measurement of the excavation would be based on actual depth of excavation.

PCC 1:2:4 — Providing and laying PCC 1:2:4 using 20 mm and down size graded stone aggregates including machine mixing, providing formwork if required, placing, compacting by hand ramming, mechanical vibrators, curing etc complete.

RCC 1:1.5:3-FOOTING/PILE — Providing , mixing and placing REINFORCEMENT CEMENT CONCRET 1:1.5:3 mix using 20 mm and down size graded crushed aggregate including providing and fixing necessary plywood /steel shuttering , scaffolding, bracing, machine mixing, compacting by vibrators, curing, hacking the surface to receive plaster etc. complete. Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item. Concrete conforming to relevant specifications of IS 456 - Latest Edn.

REINFORCEMENT STEEL — Supply ,fabrication, hoisting and placing in position HYSD reinforcement bars conforming to IS1786 -Latest Edition Minimum Grade FE 415 or higher grade TMT bars of same grade as per detailed drawing and specifications including cutting, bending, cranking and tying with 18 SWG black annealed binding wire complete. The rates shall be applicable for all heights and depths. Payment shall be made as per reinforcement drawings and with theoretical weights only including all authorised laps. No paymenst shall be made for chairs, spacers <(>&<)> hooks.Weight of Binding wire shall not be considered for payment.

BRICK MASONRY — "BRICK MASONRY WORKS :Providing and constructing following brick masonry in CM 1:5 using first quality bricks of Class designation 35 (35 KG / SQCM minimum) and conforming to IS-1077-1986 including providing all openings and projections , raking the joints to 1 cm deep, scaffolding, soaking of bricks in water prior to use and curing etc complete as per specifications . "

SMOOTHPLASTERING-12MM — Providing and laying 12mm thick smooth cement plastering in 1:4 CM in single coat to all the interior walls including providing necessary scaffolding, chicken wire mesh at all joints of brick and concrete surfaces with a minimum overlap of 150 mm in all directions and additional thickness if required to achieve perfect line and level, groove cutting without any extra cost.

WHITE WASH — WHITEWASH Providing and applying 3 coats of white wash to plastered and concrete surfaces including providing necessary scaffolding, surface preparation , mixing DDL binder, blue etc. complete as per IS: 712- Latest Edition. If additional coats are required to obtain uniform and smooth finish, the same shall be carried out at no extra cost.

ACRYLICEMULSION PAINT — ACRYLIC EMULSION PAINT Providing and applying 3 coats of acrylic anti fungal cement paint including primer of approved make <(>&<)> shade to all the exterior surfaces as per manufacturer's specifications including providing necessary scaffolding, curing , etc. complete. If additional coats are required to obtain uniform finish, the same shall be carried out at no extra,cost as directed by Engineer In Charge. General specifications/guidelines given under WHITEWASH item also to be followed, as applicable.

WATER PROOFCEMENT PAINT 1341-HISAR TERMINAL — WATER PROOF CEMENT PAINT Providing and applying 2 coats of Cement Paint to plastered and concrete surfaces including providing necessary scaffolding, surface preparation etc. complete. If additional coats are required to obtain uniform and smooth finish, the same shall be carried out at no extra cost. General specifications/guidelines given under WHITEWASH item also to be followed, as applicable.