NA Addl Amravati Indl Area PM MITRA Park Amravati Nandgaonpeth Package I Providing Trunk Infrastructure Roads Water supply Network Street Lights Plug and Play Sheds Amenities like Security Command and Control Center with SCADA Admin Building and alli

Construction of concrete road

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. ( Rates excluding GST )

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. ( Rates excluding GST )

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. ( Rates excluding GST )

Stabilization of Soil or Sub-Base/Base Course or Existing Pavement Crust upto the required depth by In-Situ Stabilization method using Cement / Cementitious additives / Chemical additives / Combination: - Providing and pre-spreading of Binder (Cement / Cementitious additives / Chemical additives / combination) at rate of required quantity (% by weight) as per job mix design in accordance with IRC 37-2018 using a truck-mounted automated binder spreader with micro-processor controlled weighing and spreading system. The binder spreader shall have variable working width upto 2.4m to efficiently manage the width of the whole pavement. The in-situ stabilization process shall be carried out using a self-propelled wheeled Stabilizer / Reclaimer with a minimum working width of 2m or 2.4m and minimum engine horsepower of 305 kW having in-built automated water-spraying and depth control systems with variable working depth of up to 500 mm. The entire in-situ process shall be carried out in a single pass including pulverizing of soil/aggregates/combination or milling of existing asphalt pavement and simultaneous mixing with pre-spread binder (cement/additive) and water to the desired depth. The resultant stabilized mix shall be compacted using a vibratory padfoot compactor of 14-20 tonne weight as per design depth and then graded to the required profile, level and thickness using a motor grader. The graded surface shall be then compacted using a smooth vibratory roller to achieve the desired proctor density as per IRC 37-2018 and complete in all respects including curing with water as required including all materials, labor, machinery, etc. Necessary graded stone aggregates shall be added by pre-spreading with cement to achieve desired gradation and profile of the road. The minimum unconfined compresssive strength (UCS) of stabilized sub-base should be 4.5 / 7 MPa after 7 / 28 days curing as per IRC 37-2018 .Also, durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2018 .The gradation mixes and materials should be as per IRC 37-2018.

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) ( Rates excluding GST )

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material ( Rates excluding GST )Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material ( Rates excluding GST )

Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Construction of dry lean cement concrete Sub- base over a prepare sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete.

Providing and applying Poly Ironite Ceramic Cementitious (PICC) of self curing, a high abrasion resistant, non-shrink,high strength, low porosity, UV resistant coating mortar on existing GSB of 100 mm thickness , get levelled the surface and cure then applying self curing coating PICC mortar for 50 mm thickness after stamp the surface by special concrete stamping mold as per specified texture and colour etc.complete with all leads and lifts, Material, Machinery, Labour etc. complete as per specification and as directed by engineer-in- charge.

Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at tophaving depth of 15 mm. as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mOne Metric Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 50.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs ith proper alignment etc. complete.

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). ( Rates excluding GST )

Providing and laying in PCC M15 grade leveling course below approach slab complete with fully automatic micro processor PLC enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and Technical specifications etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ) ( Rates excluding GST )

Providing, erecting pre-cast elements such as cover slabs for drains, grills, kerbs, kerb stone, dividers, manholes, frames, manholes covers, gutters, fence posts grills, rails lintels, sills, bed blocks, steps or any other member or element as per drawings & specifications using RCC grade M-20 including shuttering as may be required, compacting by plate vibrator, curing and finishing the element where required with 1:3 cement mortar, transporting to site and erecting in position grouting with cement mortar 1:3 as may be required and curing etc. all labour and material complete. (Including cost of Steel reinforcement) ( Rates excluding GST )

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Rates excluding GST )

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) ( Rates excluding GST )

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. ( Rates excluding GST )

Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600 mm diameter in proper line, level and slope etc. complete.( Excluding GST )

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.

Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete.

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete.. (Rates excluding GST

Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.

P/L/J Dist. Pipe line Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259)

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259)

Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259)

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)

Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)

Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MIDC including ,Laying,jointing, Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi- tion/revision with amendments for Rubber Gaskets.

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. MJ Coller/ coupling l) 200 mm dia.

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. Tail piece l) 200 mm dia.

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. DI Tee l) 500x500x200

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. DI Tee l) 250x250x200

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. Air Valve l) 200x200x100

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. wash out l) 200x200x100

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. Blank flange l) 200 mm

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. flanged spg tail piece for wash out & Air valves. For washout 200 mm dia

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. Air valve l) 200 mm

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. For blank flange l) 200 mm

Supply of C. I. Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. 100 mm For Controlling valve

Providing & supplying Air valve as per IS 14845-2000 and MJP standard specification double orifice type combined with islating sluice valv mounted in horrizontal position & operated by wheel gearing… etc complete 2) 100 mm dia. Air valve double ball flanged type PN. 1.0

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge.1.5x1.5x1.5

Construction of chember of size 1.2 x 0.90 mtr ( inside) in bb masonary (230 mm ) thick wall in 1;6) 100 mm thick plain cement concrete for bed with hight of brick masonary 1.50 mtr above pcc top & finish with 75 mm thick M20 grade of concrete at top all over the brick wall with offset for proper fixing of concrete cover . Cover shall be cast in M-20 grade of concrete with the required reinforcing bar includig curing etc. complete.

Cutting and champhering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge (for all class of pipes).200 mm dia

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. 80 mm to 300 mm

Prooviding & jointing MS Pipe line …etc. complete. 200 mm dia M.S Pipes for Air valve Two meter @ each air valve.

Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support.Butterfly valve - PN - 1 (With by pass arrangement) 200 mm dia

Providing and fixing 80 mm CI stand post type Fire Hydrant with 65 mm Brass male outlet coupling having One No. each Flange riser 300 mm length, duck foot bend, 80 mm sluice valves, Road surface box, 80mm flange/socket tail piece confirming to I.S. 908-1975 including taxes and duties except octroi.

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.

Construction of foot path & storm water gutter. Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. ( Rates excluding GST )

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. ( Rates excluding GST )

Providing and laying in PCC M15 grade leveling course below approach slab complete with fully automatic micro processor PLC enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and Technical specifications etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ) ( Rates excluding GST )

Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete.

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( Rates excluding GST )

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( Rates excluding GST )

Providing, erecting pre-cast elements such as cover slabs for drains, grills, kerbs, kerb stone, dividers, manholes, frames, manholes covers, gutters, fence posts grills, rails lintels, sills, bed blocks, steps or any other member or element as per drawings & specifications using RCC grade M-20 including shuttering as may be required, compacting by plate vibrator, curing and finishing the element where required with 1:3 cement mortar, transporting to site and erecting in position grouting with cement mortar 1:3 as may be required and curing etc. all labour and material complete. (Including cost of Steel reinforcement) ( Rates excluding GST )

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Rates excluding GST )

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) ( Rates excluding GST )

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material ( Rates excluding GST )

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) ( Rates excluding GST )

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. ( Rates excluding GST )

Construction of cable duct Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. ( Rates excluding GST ).

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. ( Rates excluding GST )

Providing and laying in PCC M15 grade leveling course below approach slab complete with fully automatic micro processor PLC enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and Technical specifications etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ) ( Rates excluding GST )

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( Rates excluding GST )

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( Rates excluding GST )

Providing, erecting pre-cast elements such as cover slabs for drains, grills, kerbs, kerb stone, dividers, manholes, frames, manholes covers, gutters, fence posts grills, rails lintels, sills, bed blocks, steps or any other member or element as per drawings & specifications using RCC grade M-20 including shuttering as may be required, compacting by plate vibrator, curing and finishing the element where required with 1:3 cement mortar, transporting to site and erecting in position grouting with cement mortar 1:3 as may be required and curing etc. all labour and material complete. (Including cost of Steel reinforcement) ( Rates excluding GST )

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. ( Rates excluding GST )

Providing cut for the existing Cable duct opening for the Power cable services etc

Construction of paved side shoulder Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. ( Rates excluding GST )

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. ( Rates excluding GST )

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material ( Rates excluding GST )

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)

Plug & Play park in PM Mitra Park Layout. Designing i.e. Preparation of Architectural drawing with all amenity in the plot as per MIDC DC rules & providing services of Architect from obtaining necessary approval/Fire NOC, BCC from concerned authority, RCC design/Drawing with determining SBC, Structural steel design/drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority. The item also includes providing Three sets of Architectura/Structural Design & Drawing as per necessity for execution of work along with soft copy. Construction of Plug & play shed having Built up area 250 Sqm with specified Height and size as per drawing having foundation & structure in M-20 grade of concrete with TMT FE 500 bar including Brick masonary 230 mm thick wall up to 3.0 m Height above plinth, Pre Engineering structure above 3.00 m height comprising of primary members of Designs M.S. I-sections with necessary paintings. Girts Purlin Z-section made out of GI precoated 0.5 mm thick with lighting 5% roof area with Sand witch PUFF panel/insulation puff panel & ventilation system as per specification etc. Item includes plot levelling, Brick masonary 230 mm thick up to plinth & super structure, Internal & Outer plaster 20 mm thick. Plinth filling with the good quality murum, Doors & Window with toilet accessories as per Specification. RCC slab at plinth level, Casting of all RCC work, Trimix flooring in shed area and Vitrified tiles in mezzanine area, Stainless steel railing over staircase and mezzanine floor, Plumbing arrangement, Drainage arrangement, PVC overhead tank one number of 2000 litre capacity with float valves, UPVC rain water pipe, HDPE pipe septic tank 1200 mm dia 1 Nos, soak pit, rain water harvesting system etc. The item also includes paver block in open plot area on sub base comprising of excavation, murum filling, soling and PCC. Land scapping with decorative ornamental/flower plants and lawn, FRP security cabin, Parking shed, RCC underground water tank, Fire tank, Brick masonry compound wall to all side of plot as per drawing and decorative front wall with MS grill & MS main gate, CD work and approach road, internal and external electrification. Fire fighting arrangement as per prevailing norms etc.The item shall be executed as per approved Architectural drawings, RCC/Structural design & detail tender specifications and instructions of Engineer incharge with all material, labour, tools and plants, equipments, etc. complete.(Rate excluding gst)

Designing i.e. Preparation of Architectural drawing with all amenity in the plot as per MIDC DC rules & providing services of Architect from obtaining necessary approval/Fire NOC, BCC from concerned authority, RCC design/Drawing with determining SBC, Structural steel design/drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority. The item also includes providing Three sets of Architectura/Structural Design & Drawing as per necessity for execution of work along with soft copy. Construction of Plug & play shed having Built up area 500 Sqm with specified Height and size as per drawing having foundation & structure in M-20 grade of concrete with TMT FE 500 bar including Brick masonary 230 mm thick wall up to 3.0 m Height above plinth, Pre Engineering structure above 3.00 m height comprising of primary members of Designs M.S. I-sections with necessary paintings. Girts Purlin Z-section made out of GI precoated 0.5 mm thick with lighting 5% roof area with Sand witch PUFF panel/insulation puff panel & ventilation system as per specification etc. Item includes plot levelling, Brick masonary 230 mm thick up to plinth & super structure, Internal & Outer plaster 20 mm thick. Plinth filling with the good quality murum, Doors & Window with toilet accessories as per Specification. RCC slab at plinth level, Casting of all RCC work, Trimix flooring in shed area and Vitrified tiles in mezzanine area, Stainless steel railing over staircase and mezzanine floor, Plumbing arrangement, Drainage arrangement, PVC overhead tank one number of 2000 litre capacity with float valves, UPVC rain water pipe, HDPE pipe septic tank 1200 mm dia 1 Nos, soak pit, rain water harvesting system etc. The item also includes paver block in open plot area on sub base comprising of excavation, murum filling, soling and PCC. Land scapping with decorative ornamental/flower plants and lawn, FRP security cabin, Parking shed, RCC underground water tank, Fire tank, Brick masonry compound wall to all side of plot as per drawing and decorative front wall with MS grill & MS main gate, CD work and approach road, internal and external electrification.Fire fighting arrangement as per prevailing norms etc. The item shall be executed as per approved Architectural drawings, RCC/Structural design & detail tender specifications and instructions of Engineer incharge with all material, labour, tools and plants, equipments, etc. complete.(Rate excluding gst)

Designing i.e. Preparation of Architectural drawing with all amenity in the plot as per MIDC DC rules & providing services of Architect from obtaining necessary approval/Fire NOC, BCC from concerned authority, RCC design/Drawing with determining SBC, Structural steel design/drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority. The item also includes providing Three sets of Architectura/Structural Design & Drawing as per necessity for execution of work along with soft copy. Construction of Plug & play shed having Built up area 1000 Sqm with specified Height and size as per drawing having foundation & structure in M-20 grade of concrete with TMT FE 500 bar including Brick masonary 230 mm thick wall up to 3.0 m Height above plinth, Pre Engineering structure above 3.00 m height comprising of primary members of Designs M.S. I-sections with necessary paintings. Girts Purlin Z-section made out of GI precoated 0.5 mm thick with lighting 5% roof area with Sand witch PUFF panel/insulation puff panel & ventilation system as per specification etc. Item includes plot levelling, Brick masonary 230 mm thick up to plinth & super structure, Internal & Outer plaster 20 mm thick. Plinth filling with the good quality murum, Doors & Window with toilet accessories as per Specification. RCC slab at plinth level, Casting of all RCC work, Trimix flooring in shed area and Vitrified tiles in mezzanine area, Stainless steel railing over staircase and mezzanine floor, Plumbing arrangement, Drainage arrangement, PVC overhead tank one number of 2000 litre capacity with float valves, UPVC rain water pipe, HDPE pipe septic tank 1200 mm dia 1 Nos, soak pit, rain water harvesting system etc. The item also includes paver block in open plot area on sub base comprising of excavation, murum filling, soling and PCC. Land scapping with decorative ornamental/flower plants and lawn, FRP security cabin, Parking shed, RCC underground water tank, Fire tank, Brick masonry compound wall to all side of plot as per drawing and decorative front wall with MS grill & MS main gate, CD work and approach road, internal and external electrification. Fire fighting arrangement as per prevailing norms etc.The item shall be executed as per approved Architectural drawings, RCC/Structural design & detail tender specifications and instructions of Engineer incharge with all material, labour, tools and plants, equipments, etc. complete.(Rate excluding gst)

Designing i.e. Preparation of Architectural drawing with all amenity in the plot as per MIDC DC rules & providing services of Architect from obtaining necessary approval/Fire NOC, BCC from concerned authority, RCC design/Drawing with determining SBC, Structural steel design/drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority. The item also includes providing Three sets of Architectura/Structural Design & Drawing as per necessity for execution of work along with soft copy. Construction of Plug & play shed having Built up area 1500 Sqm with specified Height and size as per drawing having foundation & structure in M-20 grade of concrete with TMT FE 500 bar including Brick masonary 230 mm thick wall up to 3.0 m Height above plinth, Pre Engineering structure above 3.00 m height comprising of primary members of Designs M.S. I-sections with necessary paintings. Girts Purlin Z-section made out of GI precoated 0.5 mm thick with lighting 5% roof area with Sand witch PUFF panel/insulation puff panel & ventilation system as per specification etc. Item includes plot levelling, Brick masonary 230 mm thick up to plinth & super structure, Internal & Outer plaster 20 mm thick. Plinth filling with the good quality murum, Doors & Window with toilet accessories as per Specification. RCC slab at plinth level, Casting of all RCC work, Trimix flooring in shed area and Vitrified tiles in mezzanine area, Stainless steel railing over staircase and mezzanine floor, Plumbing arrangement, Drainage arrangement, PVC overhead tank two number of 2000 litre capacity with float valves, UPVC rain water pipe, HDPE pipe septic tank 1200 mm dia 1 Nos, soak pit, rain water harvesting system etc. The item also includes paver block in open plot area on sub base comprising of excavation, murum filling, soling and PCC. Land scapping with decorative ornamental/flower plants and lawn, FRP security cabin, Parking shed, RCC underground water tank, Fire tank, Brick masonry compound wall to all side of plot as per drawing and decorative front wall with MS grill & MS main gate, CD work and approach road, internal and external electrification. Fire fighting arrangement as per prevailing norms etc.The item shall be executed as per approved Architectural drawings, RCC/Structural design & detail tender specifications and instructions of Engineer incharge with all material, labour, tools and plants, equipments, etc. complete.(Rate excluding gst)

Designing i.e. Preparation of Architectural drawing with all amenity in the plot as per MIDC DC rules & providing services of Architect from obtaining necessary approval/Fire NOC, BCC from concerned authority, RCC design/Drawing with determining SBC, Structural steel design/drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority. The item also includes providing Three sets of Architectura/Structural Design & Drawing as per necessity for execution of work along with soft copy. Construction of Plug & play shed having Built up area 2000 Sqm with specified Height and size as per drawing having foundation & structure in M-20 grade of concrete with TMT FE 500 bar including Brick masonary 230 mm thick wall up to 3.0 m Height above plinth, Pre Engineering structure above 3.00 m height comprising of primary members of Designs M.S. I-sections with necessary paintings. Girts Purlin Z-section made out of GI precoated 0.5 mm thick with lighting 5% roof area with Sand witch PUFF panel/insulation puff panel & ventilation system as per specification etc. Item includes plot levelling, Brick masonary 230 mm thick up to plinth & super structure, Internal & Outer plaster 20 mm thick. Plinth filling with the good quality murum, Doors & Window with toilet accessories as per Specification. RCC slab at plinth level, Casting of all RCC work, Trimix flooring in shed area and Vitrified tiles in mezzanine area, Stainless steel railing over staircase and mezzanine floor, Plumbing arrangement, Drainage arrangement, PVC overhead tank four number of 2000 litre capacity with float valves, UPVC rain water pipe, HDPE pipe septic tank 1200 mm dia 1 Nos, soak pit, rain water harvesting system etc. The item also includes paver block in open plot area on sub base comprising of excavation, murum filling, soling and PCC. Land scapping with decorative ornamental/flower plants and lawn, FRP security cabin, Parking shed, RCC underground water tank, Fire tank, Brick masonry compound wall to all side of plot as per drawing and decorative front wall with MS grill & MS main gate, CD work and approach road, internal and external electrification. Fire fighting arrangement as per prevailing norms etc.The item shall be executed as per approved Architectural drawings, RCC/Structural design & detail tender specifications and instructions of Engineer incharge with all material, labour, tools and plants, equipments, etc. complete.(Rate excluding gst)

Designing i.e. Preparation of Architectural drawing with all amenity in the plot as per MIDC DC rules & providing services of Architect from obtaining necessary approval/Fire NOC, BCC from concerned authority, RCC design/Drawing with determining SBC, Structural steel design/drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority. The item also includes providing Three sets of Architectura/Structural Design & Drawing as per necessity for execution of work along with soft copy. Construction of Plug & play shed having Built up area 2500 Sqm with specified Height and size as per drawing having foundation & structure in M-20 grade of concrete with TMT FE 500 bar including Brick masonary 230 mm thick wall up to 3.0 m Height above plinth, Pre Engineering structure above 3.00 m height comprising of primary members of Designs M.S. I-sections with necessary paintings. Girts Purlin Z-section made out of GI precoated 0.5 mm thick with lighting 5% roof area with Sand witch PUFF panel/insulation puff panel & ventilation system as per specification etc. Item includes plot levelling, Brick masonary 230 mm thick up to plinth & super structure, Internal & Outer plaster 20 mm thick. Plinth filling with the good quality murum, Doors & Window with toilet accessories as per Specification. RCC slab at plinth level, Casting of all RCC work, Trimix flooring in shed area and Vitrified tiles in mezzanine area, Stainless steel railing over staircase and mezzanine floor, Plumbing arrangement, Drainage arrangement, PVC overhead tank three number of 2000 litre capacity with float valves, UPVC rain water pipe, HDPE pipe septic tank 1200 mm dia 1 Nos, soak pit, rain water harvesting system etc. The item also includes paver block in open plot area on sub base comprising of excavation, murum filling, soling and PCC. Land scapping with decorative ornamental/flower plants and lawn, FRP security cabin, Parking shed, RCC underground water tank, Fire tank, Brick masonry compound wall to all side of plot as per drawing and decorative front wall with MS grill & MS main gate, CD work and approach road, internal and external electrification.Fire fighting arrangement as per prevailing norms etc. The item shall be executed as per approved Architectural drawings, RCC/Structural design & detail tender specifications and instructions of Engineer incharge with all material, labour, tools and plants, equipments, etc. complete.(Rate excluding gst)

Consultancy for designing and drawing(Rate excluding gst)

Providing, Erecting and Commissioning of Internal and External Electrification with Street light arrangement work of Plug and play sheds in PM MITRA park Layout.

Land scaping & Beautification of PM MITRA park . Providing on site required variety of Tree . Specification:- Minimum Girth 25 to 30 c.m. ,& height 2.0 to 2.50 m.,sufficient Branches with Maximum number of Leaves,Plant should be Healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.

Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs.

Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box.

Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m

Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 0.60 x 0.60 x 0.60m.

Maintainance of Newly Planted tree varities having height 1mtr. - 2mtr. For 12 months including watering and misc accessories for maintainance etc complete

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 25mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete

Providing and making ISI Mark ferrule connection of 25mm dia.to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete.

Providing the drip Irrigation system for single, double or multi rows of approved brand like Jain irrigation, Finolex EPC or equivalent for plantation below 0.3 m ground including excavation, testing and commissioning as directed, including LD mains, spaghaty pipes, non openable constant pressure dripers, PP bowl valves as required etc. complete (Every single row shall be counted for measurement) 20 mm dia

4 ltr /hr dripper

Providing watch and ward of tree plantation in open spaces / along roadsides peripheri of park in industrial area

Providing and fixing FRP security cabin of 8 X 6 foot size including all window door etc complete

Providing & fixing MS tree guards made with MS angle & Ms mesh directed by Engineer incharge.

Preparation of lawn for 200 mm thick including supplying fresh garden soil,well decomposed Farm Yard Manure ,required varity of lawn,filling & mixing garden soil ,Manure thoroughly well, watering , maintainance for first 30 days as directed by Engineer Incharge etc. complete.

Maintainance of lawn for eleven months as directed by Engineer Incharge etc. complete.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation / steps including steel centering formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing 22 B.W.G. plain FRP sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70 x 45 mm to be paid separately)

Providing & fixing GRC Sheet for RCC wall at entrance of PM MITRA park as directed by Engineer Incharge.

Providing & fixing BOLLARD LIGHTS at entrance of PM MITRA park as directed by Engineer Incharge.

Providing & fixing FOUNTAIN LIGHTS at entrance of PM MITRA park as directed by Engineer Incharge.

Providing & fixing Waterproof PROFILE LIGHTS at entrance of PM MITRA park as directed by Engineer Incharge.

Providing & fixing SURFACE CYLINDER LIGHTS at entrance of PM MITRA park as directed by Engineer Incharge.

Providing & fixing SMART STREET LIGHTS at entrance of PM MITRA park as directed by Engineer Incharge.

Providing & fixing WATER FOUNTAIN BUBBLERS at entrance of PM MITRA park as directed by Engineer Incharge.

Designing i.e. Preparation of Architectural drawing with all amenity at the entrance of PM MITRA Park RCC design/Drawing with determining SBC, Structural steel design/drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority.

ICCC Infrastructure Setup with IT & Non-IT Infrastructure

Video Wall Solution LED 3x1.6 Meter

Video wall controller with cabling and other fixture and wall management software

Operator Workstation (Helpdesk) with 1 monitor (22") with office productivity suite licenses, Headphone & Microphones & Power cords/ HDMI Connector

Network Colour Laser Printer

Multi Function Printer (MFP) Heavy Duty

Indoor Fixed Dome Cameras for internal surveillance

IP PABX System including all accessories

IP Phone

PRI Line (Pair) with all necessary accessories

Digital Set top box

Video Conferencing Unit

LED display to present critical information Display (War Room)

SITC of 30 KVA online UPS with batteries,Racks, SNMP Card (4 hr. backup at full load)

250 KVA DG SET

Fire Suppression system

Fire Alarm System

Smoke Detection System

Rodent repellent system

Water Leak Detection System

Access Control System

Precision Air Conditioning system

Networking Cost (Passive Components such as LAN/CAT 6 Cabling)

Internet Leased Line

P2P leased connectivity

Electrical Cabling & Necessary Illumination Devices for CCC, War Room, Helpdesk room, NOC room, Manager(s) room etc.

Installation, Setting up, Interior, Configuration and Testing of Command and Control Centre

DC and DR Setup (On-premise & Cloud infrastructure)

Server and OS with necessary hardware configurations for supporting requirement of Video Management System, Traffic Management and Enforcement system

Server and OS with necessary hardware configurations for supporting requirement of Video Analytics except Face Recognition

Server and OS with necessary hardware configurations for supporting requirement of Face Recognition

Storage with necessary hardware configuration along with required SAN Switch, licenses, for supporting current and future Video Management System (VMS), Video Analytics, Traffic Management and Enforcement system requirement sizing

Distribution Switch

Core Switch

Core Router

Firewall

Antivirus Software

KVM Switch with Display

24 Port Access Switch

Enterprise Management System

42U (1000 x 1200 mm) Server Rack with PDU & accessories for placement of above hardware (Size 1200mm Depth )

Cloud based DC & DR Setup for ICCC Platform and other smart solutions except Surveillance System components

ICCC Software Platform & Integrations

Spoke level ICCC Platform with Perpetual License

Integration of ICCC platform with smart use-cases per requirement and

Integration with Head Office ICCC application

Integration with Substation Monitering System

Water Meter Software

GIS Integration with GIS enterprise Platform and HO ICCC Application

General Surveillance System

Outdoor Fixed Camera With IR

Outdoor PTZ camera

8 Port L2 Industrial Grade Switch at edge location

SITC Online UPS with batteries,Racks, SNMP Card (1 hr. backup at full load)

GI Poles for cameras and equipment

Provisioning of Electrical Meter (One-time Charges)

Video management system

Face Recognition License

Deployment of Video Analytics (VA) Engine with Minimum 10 Use Cases

Loitering and Suspicious Activity

Tanker Movement Detection using ANPR

Object Abandonment Detection

Fire & Smoke Detection

Water Logging on Road

Person Collapsing

People Count

Crowd Detection

Solid Waste Dumping Detection

Outdoor Field Junction Box for General Surveillance

Installation, testing, commissioning of General Surveillance with all sub-components with all accessories, electrical, networking, foundation and civil works, etc.

Traffic Enforcement System (2 Junction)

Red Light Violation Detection camera

ANPR Camera

IR Illuminator

Local Processing Unit

Automatic Number Plate Recognition System, Red Light Violation Detection System, Wrong Way Detection System, Triple Ride Detection System License

Red Light Violation Detection System Licesne

E-Challan System

Traffic Enforcement System Integration with Command Control Room

Gantry For Cameras and Equipments

Installation, testing, commissioning of Traffic Enforcement System with all sub-components with all accessories, electrical, networking, foundation and civil works, etc.

Smart Industry Solution Components

Smart Pole with all sub-components with all accessories, electrical, networking, foundation and civil works, etc.

SITC of Air Quality Monitoring sensors

SITC of Variable Message Bill Board (VMB) for Smart Pole

SITC of CCTV Camera PTZ Setup for Smart Pole

SITC of PA system including hardware, software mounting infrastructure, accessories etc.

SITC of PA System Software Application at ICCC

SITC of Emergency Call Box (ECB) System including hardware, software mounting infrastructure, accessories etc.

SITC of Emergency Call Box (ECB) System Software Application at ICCC

Smart Street Light with controller for Smart Pole integration with smart light system

Variable Message Display (VMD) 4.70 Meters x 1.90 Meters System including VMD Controller with Content Mgmt. Software at ICCC

SITC Online UPS with batteries, Racks, SNMP Card (1 hr. backup at full load) for Smart Poles 3 KVA

SITC Online UPS with batteries,Racks, SNMP Card(1 hr. backup at full load) for VMD 6 KVA

8 Port L2 Industrial Grade Switch at edge location

Installation, Testing, Commissioning of Poles for VMD (including ICT mounting structure, pole inclusive of all civil, electrical, erection, earthing work with necessary foundation for Variable Messaging Display

Installation, Testing, Commissioning of Poles for Smart Pole (including ICT mounting structure, pole inclusive of all civil, electrical, erection, earthing work with necessary foundation for Variable Messaging Display

Provisioning of Electrical Meter (One-time Charges)

Smart Street Light Management System

P/E/C 120 W Street Light Decorative Pole with Dual Light Arm: Height 9 Meter from Ground , Arm 1.5 Meter (Dual arm size), Decorative structure etc, including foundation and installation. Cost includes all lights and fitting

P/E/C 120 W Street Light Decorative Pole with Dual Light Arm: Height 9 Meter from Ground , Arm 1.5 Meter (Double arm size), Decorative structure etc. Complete Installation work - Only Pole and fitting with all accessories( cabling , fondation not included )

Street Light 8 Meter pole Single Arm (Complete Pole including cables and installation)

Smart Street light Controller

Smart Street Light Gateway

Communication Server for Smart Street Light

Smart Street Light Management Software Platform

Smart Feeder Panel including all necessary civil work for installation

P/E/C of 20 Meter Decorative High Mast Supply & Installation including all types of electrical accessories , Cable, controller and fittings -400 W - 12 fitting per high mast

Network Connectivity - Optical Fiber Cabling (OFC)

SITC of 48 Core Optical Fiber Cabling (OFC) as per design approval

End mile connectivity ( 6 core + enclouser + chamber + LIU)

Supply & laying of 32 mm HDPE pipe of reputed make

Supply & laying of 32 mm DWC pipe of reputed make

Horizontal Directional Drilling (HDD) as per site requirement

Manual/Open Trenching as per site requirement

Installation, Testing, Commissioning of Optical Fiber Cabling (including Joint Enclosure, Splicing/Termination, OTDR Test, Patch Cord, Route Marker, Coupler, civil work with necessary components)

GEOGRAPHICAL INFORMATION SYSTEM (GIS)

Drone Survey

DGPS Survey

LOD3 Survey

Drone Image Processing

Base Map creation 1: 500 scale

LoD3 Model of Buildings

Existing data collection, data cleaning and georeference

Supply, Installation, Testing & Commissioning (SITC) of AMR/AMI-Based Smart Water Meters Full Bore Electromagnetic Type IP68 Protection, Built-in RF

Accessories

Water Meter Boxes (Weatherproof, Tamperproof)

Allied Pipe Fittings (Reducers, Connectors, Bends, Couplings, Flanges, Gaskets, etc.)

Service

Fixing & Mounting of New Meters

Pressure Testing & Flow Calibration

Data Collection Infrastructure

Centralized Smart Metering System Software (License & Setup)

Data Gateways (RF/LORAWAN)

Handheld unit for Manual Data Collection System (Backup in Case of Failure)

Testing and Commissioning

Initial Flow & Pressure Testing

Remote Connectivity & Communication Testing

System Integration with Command Control Center

Online Water Quality Monitoring System

Online Multi-Parameter Analyzer (COD, BOD, TSS, Colour) with Spectrometry Sensor ,pH Analyzer

Sensor Mounting Brackets , Cables and Fixtures

Electromagnetic Full Bore Flow Meter – 300mm (Open Canal & Pipe)

Electromagnetic Full Bore Flow Meter – 600mm (Open Canal & Pipe)

Electromagnetic Full Bore Flow Meter – 900mm (Open Canal & Pipe)

IoT-Enabled Motorized Actuated Control Valve

Smart Valve Controller (Wireless Connectivity)

Sensors Terminal with GPRS system

LoRa WAN/NB-IoT/4G Gateway for Valve Connectivity

SCADA Software

Cloud Based Monitoring Software (License & Setup)

SIM Card for Smart Water and Waste Water

RF Towers (For Data Transmission)

RF Antennas & Signal Boosters

On-site calibration and testing of all installed systems

Water and Electrical Audit

Integration With Existing OCEMS System

Installation Services like Civil & Electrical Works, Cutting, Welding etc.

Technical manpower during O&M Phase of 3 Years

(1) Operation and day to day maintenance services including deployment of qualified onsite manpower for ICCC operations, IT Infra management, Field maintenance, preventive and corrective maintenance of all installed system, periodic health checks, software support, backup management, network onitoring, response and resolution of faults continuous system uptime assurance, security patching, reporting documentation and coordination with ICCC with the help of following technic all manpower ( this O&M period will start immediately after satisfactory commissioning i.e Go-live of the project )

Project Manager(Onsite) for 3 Years

IT Infrastructure Expert(Onsite) for 3 years

Operational Engineers(Onsite) for 3 years

Software application expert(Onsite) for 3 years

Operators (Onsite) for 3 years

ICCC Building Work

Designing and Preparation of Architectural drawing with all amenity in the plot as per MIDC DC rules & providing services of Architect from obtaining necessary plan approval/Fire NOC, BCC from concerned authority, RCC Design/Drawing with determining SBC, Structural steel Design/Drawing vetting from VNIT Or any other Govt Institute & obtaining final approval from MIDC’s competent authority. In addition to this the Interior layout with all details such as cabin, cubical, Table, Chair, Cupboard/Shelf, False Ceiling, Glass panelling, window curtain etc. And same got approved from MIDC’s competent authority. The item also includes providing Three sets of Architectural/Structural work/Interior work Design & Drawing as per necessity of Command & Control center for execution of work along with soft copy Construction of Ground Floor (RCC design with Provision of Ground + First floor) Fully furnished RCC Building as per requirement of Command & Control Center having Carpet area 1000 Sqm (Approximate Built up area @ 1200 Sqm) with specified Height and size as per drawing having foundation & structure (Footing, Plinth Beam, Column, Slab, Chajja, Water tank etc.) PCC in M-10 & RCC in M-20 grade (Ready Mix) of concrete with TMT FE 500 bar. Brick masonary 230 mm (1:4) thick wall in plinth & Super structure. Internal plaster (20 mm thick with neeru finish), painting with Royal Luxury Emulsion of approved make on internal wall surface with scrapping cleaning, primer coat & Two coat of Royal Luxury Emulsion. External plaster (25 mm thick sand faced) with chicken mesh of 22 guage of 30 CM width at the junction of RCC member & Brick masonary with painting of approved make, shade, pattern. Plinth filling with the good quality murum, soling, grid slab etc. Main entrance Decorative Door (1.8 M wide), other doors (Room) 1.00 M wide & Toilet Doors 0.80 M wide. Door frame for room is of good quality teak wood & Toilet door frame is of 20 MM thick Black Granite. Flush door (35 MM Thick) with veneer finish for Room & Toilet Flush door with water proof treatment of 30 MM Thick. The Door fixture (Hinges, Handels, Tower bolt, Aldrops etc.) is of good quality approved make S.S. Materials. Alluminium (Powder coated) sliding window of 3 track (as per IS 1868/1982) with all necessary fixtures & fastening such as roller & self locking catch, including 5 mm thick plain shutter glass. Office area Flooring with vitrified tiles of size 600 MM x 600 MM having 8 to 10 MM thick confirming to IS 15622-2006 of approved make, shade & pattern with necessary skirting. The antiskid tiles of approved make, shade & pattern for flooring & dado of Toilet area. Toilet/Wash room water supply & sanitary fittings such as Bib cock, Flush/Jet, Urinal, European pan, Wash hand basin, GI/CPVC pipe should of approved make. The necessary Gully Trap, Inspection chamber, rain water down take pipe, drainage lines is of approved make. The required capacity UG & Overhead RCC water tank with all allied fixtures/works. The width of staircase should not be less than 1.5 M wide having approved make, shade 20 MM thick granite for Tread/Riser and having SS railing of approved make & pattern. Electrification :- Internal electrification such as Lighting, Fans, Air Conditioner, Switch Board, Cables, Panel board, Meter room installation, DG set, Feeder pillar, Fire alarm, Bell, Indicator, Lighting arrestor, Pumping machinery, Pumps etc as per approved drawing, make, design, capacity & Numbers. Premises Development:- The plot boundry with compound wall with RCC column, beam, brick masonary as approved with plaster and painting stated above for external wall. Entrance & Premises road with 300 MM M-30 concrete grade with necessary embankment, 250 mm WMM, 200 MM GSB etc. Planter of required/approved size along with tree plantation of approved species. The security cabin, water proofing treatment, Expansion joint, CD works, Approach Road, Parking area, Parapet wall, Chambers, Septic Tank, Closed Gutter, Entrace Grill gate, Elevation treatment, Ramp, Name board, Road Furniture, Rain water harvesting, Flag post, Fire Fighting arrangement, External Electrification, Yard lighting, etc. As per approved drawing/requirement is part & parcel of premises development.

P/E/C/T Various types of VT Pumping Machineries at different locations in Addl. Amravati Industrial Area.

Providing, installing, commissioning and testing of VERTICAL TURBINE, self water lubricated above floor type pump with VHS motor capable of discharging raw water at the rate of 550 Cum/ Hr. at the duty point head of 67.50 M with suspension length of 25.00 mtrs. including bowl assembly and operating within the head range of 70 to 85 Mtr. with 1475 rpm with Vertical hollow shaft squirrel cage induction motor of capacity to run the pump of minimum 110 KW / 200 HP with "F" class insulation and B class temperature rise with hermostat protection embedded in stator winding complete operating on 440 V, 50Hz, 3 Ph, 1475 RPM AC power supply suitable to drive the pump complete with all accessories. Pump including stainless steel basket type strainer, bowl assembly, column assembly, discharge head of 200 mm dia, base plate of suitable size with minimum thickness of 24 mm, connecting stool etc. complete as per latest IS specifications. The column pipes shall be manufactured from ERW pipes of 8 mm thick and each of maximum 1.5 m length provided with anticorrosive and special treatment paint and all line shafts impellers shafts of stainless steel AISI 410 and impeller should be of CF8M including all consumable consumable materials, materials, accurate digital type glycerin Pressure gauge to read entire range of pressure complete with necessary tubing. The pump should have flat efficiency characteristics between operating range as per detail item specifications.

Designing, Providing Erecting & commissioning LT panel for 200 HP VT Pumps comprising of 2 nos. 1200 Amp, 4 pole, EDO ACB 1 Incomer, 200 HP FCMA based, 2 starters the panel should haave also spares feeder- 4 nos each of 63 amp & 100 amp MCCB the switch board panel should have all standard ccessories sich as digital voltmeter,Ammeter, Energy, MFM, pilot lamp, phase sequence metrer for all the pumps etc Complete

Providing erecting and commissioning APFC panel of 400 KVAR APFC PANEL including 50 KVAR X 4 Nos, 25KVAR X5 Nos, 10 KVAR X 5 Nos,5 KVAR X 5 Nos,including all Stem will have 7% ALUMINIUM REACTOR induction lamp, fram work etc.

Providing and supplying at dept. store or work site MS Dismantling joints suitable to various size of sluice valves, butterfly valves etc with two flanged type, welded to MS pipes made of MS plates of required thickness, bar stock materials with neoprene one piece V gland ring flanged drilled as per IS:1538, studs of electro-galvanised, and joints painted with light grey enamel paint, with necessary machining including hydraulic testing of 18 kg/cm2. The cost includes all taxes, duties etc with transportation to departmental stores except octroi charges.

Supplying, installing, testing & commissioning 630 kVA,11/0.433, 50 Hz., 3 phase, oil cooled trransfoormer with off load tap changing compact subatation having 11KV ,630 A, 21KA Capacity indoor type VCB for incomming and 1000 Amp 4pole,(EOD) type 440 Volts. ACB Including MFM meter , phase indicating lamp enclosed in panel made of CRCA sheet with powder coting, equal angle frame cabling, of appropriate capacity , with inbuilt metering cubical, using type A winding insulation (kraft paper), standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load for transformer, as per IS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspectors etc, complete...

Supplying, erecting, testing and commissioning 11KV HT metering cubicle (compact/vertical type) approved by licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos CT having required ratio between 50/5A to 200/5A, VA10 or 15, Class 0.2S, epoxy casted 3 nos PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation as per specification.

Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)Without by pass arrangement - PN -1.6 300 mm.

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valve - PN - 1.6 (Without by pass arrangement) 300 mm.

Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications having small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring,with built-in Kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gearing, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. Kinetic Air Valve Flanged Type - PN -1.6 100 mm.

Providing, installing, commissioning and testing of VERTICAL TURBINE, self water lubricated above floor type pump with VHS motor capable of discharging raw water at the rate of 1250 Cum/ Hr. at the duty point head of42.00 M with suspension length of 25.00 mtrs. including bowl assembly and operating within the head range of 30 to 50 Mtr. with 1475 rpm with Vertical hollow shaft squirrel cage induction motor of capacity to run the pump of minimum 75 KW / 100 HP with "F" class insulation and B class temperature rise with hermostat protection embedded in stator winding complete operating on 440 V, 50Hz, 3 Ph, 1475 RPM AC power supply suitable to drive the pump complete with all accessories. Pump including stainless steel basket type strainer, bowl assembly, column assembly, discharge head of 200 mm dia, base plate of suitable size with minimum thickness of 24 mm, connecting stool etc. complete as per latest IS specifications. The column pipes shall be manufactured from ERW pipes of 8 mm thick and each of maximum 1.5 m length provided with anticorrosive and special treatment paint and all line shafts impellers shafts of stainless steel AISI 410 and impeller should be of CF8M including all consumable consumable materials, materials, accurate digital type glycerin Pressure gauge to read entire range of pressure complete with necessary tubing. The pump should have flat efficiency characteristics between operating range as per detail item specifications.

Designing, Providing Erecting & commissioning LT panel for 100 HP VT Pumps comprising of 2 nos. 800 Amp, 4 pole, EDO ACB 1 Incomer, 100 HP FCMA based, 2 starters the panel should haave also spares feeder- 4 nos each of 63 amp & 100 amp MCCB the switch board panel should have all standard ccessories sich as digital voltmeter,Ammeter, Energy, MFM, pilot lamp, phase sequence metrer for all the pumps etc Complete

Providing erecting and commissioning APFC panel of 125 KVAR APFC PANEL including25 KVAR X 4 Nos, 5KVAR X5 Nos,including all Stem will have 7% ALUMINIUM REACTOR induction lamp, fram work etc.

S/E/C/T of 315 KVA, 11 KV / 0.433 KV Oil could copper wound transformer plus 5% to -15% CTC with 2.5% etc complete…

Providing and supplying at dept. store or work site MS Dismantling joints suitable to various size of sluice valves, butterfly valves etc with two flanged type, welded to MS pipes made of MS plates of required thickness, bar stock materials with neoprene one piece V gland ring flanged drilled as per IS:1538, studs of electro-galvanised, and joints painted with light grey enamel paint, with necessary machining including hydraulic testing of 18 kg/cm2. The cost includes all taxes, duties etc with transportation to departmental stores except octroi charges.

Supplying, installing, testing and commissioning 11 kV 630A, indoor type ring main unit with 2 VCB & 2 LBS with internal arc compliance complete erected on provided CC foundation/MS channels/trench, etc. as per specification.

Supplying, erecting, testing and commissioning 11KV HT metering cubicle (compact/vertical type) approved by licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos CT having required ratio between 50/5A to 200/5A, VA10 or 15, Class 0.2S, epoxy casted 3 nos PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation as per specification.

P/E/C/T 20 HP Effluent Disposal Non Clog Pumps with all required accessories at Effluent collection sump....Supply, Installation, and Commissioning of Non-Clogging Vertical Long Shaft Sump Pump System, Motor, Panel, cable, dismantling joints, valves and gauges with all required Accessories – Complete

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (round) cable 11 kV(E), 3 x 400 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Providing and erecting Heat shrinkable indoor termination kit for 11 KV (E) XLPE HT cable 3x400 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable outdoor termination kit for 11 KV (E) XLPE HT cable 3x400 sq. mm. with necessary material as per specification no. CB-JT/HT

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 300 sq. mm. aluminium onductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 400 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 400 sq mm. with necessary material as per specification No. CB-JT/LT

Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF

Making Cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps)

Liasining with MSEDCL authority for enhancing the load at Jackwell & WTP including making all payments to them towards enhanced load till approval & actual execution of work at Site including material if required

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 175 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete.

Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates,braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Internal & External Electrification of Jackwell & pure water pump house & substations, painting of substation structures, stone metals etc & providing safety equipments as per site requirements.

Royalty Charges ( The Amount of royalty charges shall be quoted by the bidder in the BOQ strictly as per the amount specified in Schedule B of tender document. Any deviation from the Schedule B amount shall not be permitted )

Testing charges ( The Amount of Material Testing charges shall be quoted by the bidder in the BOQ strictly as per the amount specified in Schedule B of tender document. Any deviation from the Schedule B amount shall not be permitted)

Please Enable Macros to View BoQ information