Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC 1395 NAPIER TOWN JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹37.5 L+₹1.9 L (5.27%)Rejected-Finance 44 EKTA NAGAR MP 4 ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹37.8 L+₹2.2 L (6.05%)Rejected-Finance H NO 114 A 10 GHAZI NAGAR RADDI CHOWKI GOHALPUR JABALPUR MP | L3 | Rejected-Finance Other than L1 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
29 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
PERIODICAL SERVICES FOR OTM AND MD ACCN AND OTHER MISC REPAIR WORKS IN THE AREA OF AGE B/R-I UNDER GE (WEST) JABALPUR
2022_MES_527753_1
8454/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per Tender documents
5 documents required · 5 mandatory
₹500
GE (West) Jabalpur
₹88,000
7 Jul 2022
1 Jun 2022
1 Jul 2022
1 Jun 2022
29 Jun 2022
15 Jun 2022
2 Jun 2022 - 13 Jun 2022
Amount
Note : Work shall be executed in the buildings up to 4th story,s and contractor has to make his own arrangement for necessary scaffolding and safety of works man/labours. Unit rate quoted to be deemed inclusive of these aspects.
Material & Labour preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots remove complete existing surface up to mother surface approved by GE than applying two coat of cement base paint and making border or patta on Chhajja, roof projection Column projection , beam projection etc as ordered by Engr-in-Charge withteracotta snocem dark colour,same materials but diffrent tinted on walls complete all as specified and directed.
Ditto all as per above items but applying one coat of cement base paint on walls complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.
M&L for one subsequent coat of oil bound distemper over a coat of the same provided under Srl item No 05 above
Material & Labour preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed.
M&L for one subsequent coat of white wash over a coat of the same provided under Srl item No 07 above
Preparation of old decorated surfaces of Wall and applying one coat of plastic emulsion paint complete all as specified and directed.
Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.
Preparation of old decorated surface of asbestos based roof or mangalore pattern tile surfaces etc and applying one coat of cement base paint complete all as specified and directed.
Preparation of old decorated surface of asbestos based roof or mangalore pattern tile surfaces etc and applying two coat weather proof paint complete all as specified and directed.
Preparation of old surface of wall exposed upto mother surface filled all cracks then applying two coats pidilite product Dr fixit Rain coat over one coat of primer , primer seal complete in all respect as specified as directed.
Preparation of old surface of wall exposed upto mother surface filled all cracks then applying three coats pidilite product Dr fixit heat shield over one coat of primer seal complete in all respect as directed as directed.
Preparation of old decorated surfacess of Manglore tiles/AC Sheets and applying one coat of exterior emulsion paint white or tinted complete all as specified and directed.
M&L for French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old works with one or more coats on old work etc complete all as specified and directed.
Preparing surfaces of any description of wood, steel, iron, concrete, brick etc and prepare the base using synthetic enamel paint of size 30 x 30 cm, black paint then writing letter exc 10 cm high but n.exc 30 cm high and width as directed with white synthetic enamel paint of superior grade for writing building numbers in complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed
M&L for Washed stone grit plaster on exterior wall in two layer under 12 mm cement plaster 1:4(1 cement : 4 coarse ) furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 kg of cement per square metre,top layer 15 mm cement plaster 1:1/2:2(1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing ,the top layer with brushes and water expose the stone chippings complete all as specified.
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer instruction complete all as specified and directed. Note: WPC shall be measured & paid separately.
M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.
Material & Labour for Preparation of newly plastered surfaces of walls and apply two coat of cement base paint over one coat of primer complete all as specified and directed.
S&F 20 mm size of wire mesh netting of stainless steel wire dia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-charge.
Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.
Preparation of old decorated surfaces of walls and applying one coat of exterior emulsion paint white or tinted complete all as specified and directed.
Preparation of old decorated surfaces of walls and applying subsequent coat of exterior emulsion paint white or tinted complete all as specified and directedunder Sl item No 29.
S&F in reapir 3 mm figured glass, pin head type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed.
S & F in repair Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples etc all complete.
Easing of door shutters exc 1.00Sqm but nexc 2.00 sqm for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.
Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore bib tap long body chromium plated alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.
S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge.
S & F in repair Brass CP bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe etc all complete.
S & F in repair Brass CP sink Mixer for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe etc all complete.
S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.
S&F in repair Health faucet,( code ALD 573 of Jaquar or eqv)
S&F in repair vitreous china wash hand basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-charge.
S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor including provision of lime concrete as required at site all as specified and directed by Engr-in-charge
S&F in repair vitreous china semi-pedestal pattern (Anglo indian type) (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor etc all as specified and directed by Engr-in-charge
S&F in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed
S&F in repairs plastic water closet seat cover white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.
S&F in repairs 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jindal/ Prakash Surya/TATA.
Ditto all as per above item but 20mm dia all as specified and directed by Engr-in-charge.
S&F in repairs Curtain dropary 25mm dia stainless steel rod of fancy type including stainless steel knobs and brackets with curtain rings of approved quality etc complete.
S&F in repairs Curtain dropary 25mm dia mild steel rod of fancy type including knobs and brackets with curtain rings of approved quality etc complete.
M&L for Providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, manhole cover etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match
Demolition cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for 75 mm thick plain Cement concrete type C- 2, 1:3:6 using (40mm graded stone aggregate) as in plinth protection etc all complete.
Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for etc all complete.
M&L for Providing, cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for plain Cement concrete 1:4:8 type D2 using (40mm graded stone aggregate as in sub base etc all complete.
M&L for Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laying over and including 50mm thick sand cushioning etc all complete.
S&F TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc all complete.
Supply only integral water proofing compound.
M&L for preparation of new Plaster surface and applying two coats of weather coat APEX utima over a coat of primer etc all as specified and directed by Engr-in-Charge
M&L for 15mm thick plaster in CM 1:3 in two layers,with & including wire netting of galvanized steel wire 0.91mm dia and mesh size 12mm placed in walls before plaster layers and fixed with tinned tack or wire stapled where required first layer of 10mm thick plaster in cement mortar 1:4 & second layer of 5mm thick in cement mortar 1:3 including taking down of loose /bulsing surafces of plastered or concrete as in chajjas, beam balcony fins etc to make to original shape at any height to repair chajjas, beam balcony fins etc in multistoreyed buildings, top layer of plaster finished even & smooth without using extra cement complete including cleaning and preparation of existing RCC surfaces and applying a coat of cement slurry and surface shall be match & finish the existing surface by applying two or more coats of cement base paint/ anti fungal exterior emulsion paint complete all as specified and directed. Note : Each layer of plaster shall be done separately.
S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
Ditto all as per above item but 75mm bore complete etc all as specified and directed.
Ditto all as per above item but 40 mm bore complete all as specified and directed.
S&F in repairs 100mm dia Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect complete as directed and specified. Before rate quoted by the contractor must be acute upto 10 Meter height etc all complete.
S&F in repairs PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed
S&F in repairs PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
S & F in repairs CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges
S & F in repairs Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S & F in repairs Aluminium anodised, barrel tower bolts 150 mm long of extruded section and fixed
S & F in repairs 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed
S & F in repairs Waste coupling 32 mm of PTMT (half or full threaded) .(Minimum weight 32mm?45gms/40mm-60 gms
S & F in repairs Waste coupling 40 mm of PTMT (half or full threaded) .(Minimum weight 32mm?45gms/40mm-60 gms
S & F in repairs Bottle trap 32 mm of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms)
Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified
S & F in repairs Grating doom 125/150 mm dia with waste hole of PTMT. (Minimum weight 40gms)
S & F in repairs PVC Flexible waste pipe 32/40 mm for WHB and Kitchen sink
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM 1:6 etc all complete.
M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM 1:6 etc all complete.
M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM 1:6 etc all complete.
M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM 1:6 etc all complete.
S & F in repairs Aluminium handles 100/125 mm length , cast type, anodised
M & L for Rendering 5 mm thick in CM 1 :4 on ceiling surfaces to be finished even and smooth without using extra cement etc all complete.
kamakshi construction
HAFEEZ CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .